Unkown Lock Status

jenwill1
Posts: 201
Joined: Sun Mar 22, 2009 5:25 pm
Location: Boerne, Texas

Unkown Lock Status

Post by jenwill1 »

I was checking my event log and noticed this error repeated each hour. I'm thinking this may be a low battery state ?

Copied on the device information on the lock below as well.

Thanks !

Z-Wave received "Utility Door Lock Device" status update is on
Z-Wave Lock Manager Debug Node ID 34 (Hex 34) found in lockIDs
Z-Wave Lock Manager Debug Node ID 34 (Hex 34) found in lockIDs
Z-Wave Lock Manager Debug Raw: 01 10 00 04 00 22 0A 71 05 AA 01 00 FF 08 FE 00 00 FF
Z-Wave Lock Manager Unknown lock status received: 170 [Node: 34]
Z-Wave Lock Manager Debug -----
Z-Wave Lock Manager Debug Node ID 34 (Hex 34) found in lockIDs


Indigo Z-Wave Version: 7.4.1
Node ID: 34
Model: Keypad Door Lock
Model ID: 00030742
Manufacturer: Kwikset
Manufacturer ID: 0090
Protocol Version: 4.34
Application Version: 4.10
Model Definition Version: 0
Library Type: 3
Class Name: Keypad Door Lock
Class Hierarchy: 04 : 40 : 03
Command Class Base: 62
Command Versions: 80v1 85v1 86v1 8Bv1 4Cv1 4Ev1 98v1 59v1 5Av1 5Dv1 5Ev1 20v1 62v1 63v1 70v1 71v1 72v1 73v1 7Av1
Encryption Status: Enabled for Commands 80 85 86 8B 4C 4E 59 5D 62 63 70 71
Multi-Endpoint Types: - none -
Multi-Endpoint Classes: - none -
Multi-Instance Counts: - none -
Features: routing, battery, beaming, security, frequentWaking
Neighbors: 2, 3
Associations: 1:[1] 2:[]
Config Values: - none -
howartp
Posts: 4559
Joined: Thu Jan 09, 2014 4:43 pm
Location: West Yorkshire, UK

Re: Unkown Lock Status

Post by howartp »

Hi Jen.

Your device is reporting strange things; it says it supports Alarm Class 0x71 version 1 but the length of the report it sent is not a v1 report.

Regardless, i've emailed Kwikset support as the value AA (decimal 170) that it's reporting (... 71 05 AA...) is not a defined value so Kwikset have implemented custom values. I already added A7, A8 and A9 (decimal 167-169) from a Kwikset document I found online that explains they are Low, Critical and Dead battery alarms, but AA (170) isn't in that guide.

Peter
jenwill1
Posts: 201
Joined: Sun Mar 22, 2009 5:25 pm
Location: Boerne, Texas

Re: Unkown Lock Status

Post by jenwill1 »

Thanks Peter... If I need to re-sync the lock or anything on my end let me know.

Regards,

Will (My wife Jen had the first half of the old email name!)
Post Reply

Return to “ZWave Lock Manager”