Autolog Stella-Z Thermostat Controller Discussion
Re: Autolog Stella-Z Thermostat Controller Discussion
I have some on order - should ship shortly I think. 
-
Sevilsivle
- Posts: 123
- Joined: Fri Jan 11, 2013 12:32 am
Re: Autolog Stella-Z Thermostat Controller Discussion
The new Fibaro TRVs are also available for order.

Tim

Tim
Re: Autolog Stella-Z Thermostat Controller Discussion
I took a look at those before I discovered that the Spirits had become available. I don't think that the Fibaro TRV supports FLiRS - I could be wrong on this?Sevilsivle wrote:The new Fibaro TRVs are also available for order.
Having FLiRS should mean better battery life and more importantly, the device should respond instantly to any request sent to it. At the moment to get any sort of quick response I have to wake-up my Popp TRV devices every 5 minutes which isn't good for battery life.
Re: Autolog Stella-Z Thermostat Controller Discussion
I think I will go with the Spirits.
The FIBARO one look better, but it's also more expensive
Yassi
The FIBARO one look better, but it's also more expensive
Yassi
-
Sevilsivle
- Posts: 123
- Joined: Fri Jan 11, 2013 12:32 am
Re: Autolog Stella-Z Thermostat Controller Discussion
The good thing about the Spirit is that the display and controls are easy to see and use when mounted low on a radiator.
I had to remove the Danfoss LC13´s as SHMBO couldn't adjust the temperature directly and changing remotely took too long even when the wake up period was at 5 minutes.
I think the Fibaro can be controlled like a standard TRV by turning the knob. Instead of a temperature or number setting it changes colour from blue to red depending on the temperature set.
Attached a link to the user manual for the Spirit so that Matt and Jay can get to work
I will hold off until first reports of functionality are out before deciding which to purchase. A new Danfoss is apparently also on its way.
Tim
https://www.eurotronic.org/fileadmin/us ... iew_04.pdf
I had to remove the Danfoss LC13´s as SHMBO couldn't adjust the temperature directly and changing remotely took too long even when the wake up period was at 5 minutes.
I think the Fibaro can be controlled like a standard TRV by turning the knob. Instead of a temperature or number setting it changes colour from blue to red depending on the temperature set.
Attached a link to the user manual for the Spirit so that Matt and Jay can get to work
I will hold off until first reports of functionality are out before deciding which to purchase. A new Danfoss is apparently also on its way.
Tim
https://www.eurotronic.org/fileadmin/us ... iew_04.pdf
Re: Autolog Stella-Z Thermostat Controller Discussion
Here is Indigo's Device Details:
Yes, they have been delivered - testing now 
Code: Select all
Indigo Device "133 - General Thermostat (v2)" Z-Wave Properties:
Indigo Z-Wave Version: 2.0.103
Node ID: 133
Model: General Thermostat (v2)
Model ID: 00030001
Manufacturer: EUROtronic
Manufacturer ID: 0148
Protocol Version: 4.61
Application Version: 0.15
Model Definition Version: 0
Library Type: 3
Class Name: General Thermostat (v2)
Class Hierarchy: 04 : 08 : 06
Command Class Base: 40
Command Versions: 40v1 80v1 43v1 85v1 86v1 55v1 98v1 59v1 5Av1 5Ev1 9Fv1 20v1 26v1 31v5 6Cv1 70v1 71v1 72v1 73v1 75v1 7Av1
Encryption Status: Supported but not Enabled
Multi-Endpoint Types: - none -
Multi-Endpoint Classes: - none -
Multi-Instance Counts: - none -
Features: routing, battery, beaming, security, frequentWaking
Neighbors: 2, 5, 6, 9, 10, 13, 14, 16, 17, 21, 22, 23, 24, 25, 29, 43, 46, 52, 98, 121
Associations: 1:[1]
Config Values: - none -
Re: Autolog Stella-Z Thermostat Controller Discussion
FLiRS seems to work.
I presume the 'frequentWaking' in the device definition means FLiRS.
I pressed the Send Status Button and got this immediate response:
Changing the setpoint works without any command queueing. This is great news and I think resolves one of the major issues with previous TRV implementations, which is that there was always a delay (based on wakeup frequency) before a command was executed.
I will now do some more testing to see how well I can integrate it into my Stella-Z plugin - it may need some coding changes.
I presume the 'frequentWaking' in the device definition means FLiRS.
I pressed the Send Status Button and got this immediate response:
Code: Select all
19 Oct 2017, 12:56:05
Z-Wave sent "133 - General Thermostat (v2)" mode status request
Z-Wave received "133 - General Thermostat (v2)" mode is heat
Z-Wave sent "133 - General Thermostat (v2)" temperature status request
Z-Wave received "133 - General Thermostat (v2)" temperature update to 22.47 °C
Z-Wave sent "133 - General Thermostat (v2)" heat setpoint status request
Z-Wave received "133 - General Thermostat (v2)" heat setpoint is 22.0 °C
Z-Wave sent "133 - General Thermostat (v2)" cool setpoint status request
I will now do some more testing to see how well I can integrate it into my Stella-Z plugin - it may need some coding changes.
-
Sevilsivle
- Posts: 123
- Joined: Fri Jan 11, 2013 12:32 am
Re: Autolog Stella-Z Thermostat Controller Discussion
May I ask where you bought them?autolog wrote: Yes, they have been delivered - testing now
Tim
Re: Autolog Stella-Z Thermostat Controller Discussion
YesSevilsivle wrote:May I ask where you bought them?
Z-Wave Eurotronic Spirit Smart Radiator Thermostat
-
Sevilsivle
- Posts: 123
- Joined: Fri Jan 11, 2013 12:32 am
Re: Autolog Stella-Z Thermostat Controller Discussion
Yikes....autolog wrote:YesSevilsivle wrote:May I ask where you bought them?
Z-Wave Eurotronic Spirit Smart Radiator Thermostat
At that price I guess it is worth waiting for them to become available here in Germany...
Tim
Re: Autolog Stella-Z Thermostat Controller Discussion
Do they ship to the UK 
-
Sevilsivle
- Posts: 123
- Joined: Fri Jan 11, 2013 12:32 am
Re: Autolog Stella-Z Thermostat Controller Discussion
You have Mail!autolog wrote:Do they ship to the UK
Re: Autolog Stella-Z Thermostat Controller Discussion
Will they work out of box with Indigo?
I need only one for the bathroom radiator to turn it on in the morning and then again in the afternoon.
Do they work with Z-Wave Stick S2 (I do not have the Gen5).
Thanks
I need only one for the bathroom radiator to turn it on in the morning and then again in the afternoon.
Do they work with Z-Wave Stick S2 (I do not have the Gen5).
Thanks
Re: Autolog Stella-Z Thermostat Controller Discussion
That would be also nice 
https://www.amazon.de/Popp-Heizk%C3%B6r ... B01I5N9KFY
Does it work the the autolog plugin?
https://www.amazon.de/Popp-Heizk%C3%B6r ... B01I5N9KFY
Does it work the the autolog plugin?
Re: Autolog Stella-Z Thermostat Controller Discussion
Yes it does - I am using a number of them.MarcoGT wrote:That would be also nice
https://www.amazon.de/Popp-Heizk%C3%B6r ... B01I5N9KFY
Does it work the the autolog plugin?