Adding Zooz devices to INSTEON network with scenes

[Valhalla2]

I would like to start replacing some of my legacy Insteon switches with Zooz dimmers and my Indigo setup is mostly built using Action Groups with Insteon scenes. Z-wave devices don't show up when I try and modify the scene to add the Zooz device.

Any advice on how to retain much of my Action Group programing and start to include both Insteon and Z-wave devices in Scenes?

Thanks!

[jay (support)]

If you're talking about Insteon scenes, then you'll have to do something else since a Z-Wave device can't be part of an Insteon scene (since it's not Insteon).

In the action groups where you use Insteon scenes you can just add the Z-Wave device control to the action group itself. That way you can mix/match Insteon (using scenes) and Z-Wave (using direct commands).