matt (support) wrote:I've added #1 and #2 to the feature request list.
For #3, try using the Interfaces->Z-Wave->Modify Configuration Parameter... menu item to change the value of parameter 111. Set the param size to 4 bytes, then enter the param value you want, in seconds.
Hi Matt,
i try to switch from Fibaro to Indigo
I want use Home Energy Meter DSB09104-ZWEU with 2 Clamp
I think that the 101=16131 it's not the value correct.
I receive Clamp1 and Clamp 2 watt and kWh value correct, but for the Meter total ,receive only battery status (but i do not use because are powered) and watt , but no kWh value.
I try to change the 101 parameter to 6926 (but i try also other values) with Z-Wave->Modify Configuration Parameter, but i think not work.
I never see anything in the Event log,but the read current from devace work.
Now I use the freetrial, i'm waiting for the registretion number from the reseller for the regular version.
Thanks in advance