I have over 180 nodes on my network and it all use to work well.
Now I have installed a Danalock V3 and the lock is not behaving well at all, it fails to lock/unlock maybe 1/10 times with typical errors below:
Z-Wave Error encrypted command received from node ID 184 has invalid CBC-MAC value (ignoring)
Z-Wave Error no ack/nak/busy reply (184) for nonceReport (re-sending)
Z-Wave Error send "Storage door 1 lock" unlock failed
Z-Wave Error send "Storage door 1 lock" lock failed
I think below is related as well:
Z-Wave Error RCVD encryptedPacket: unexpected sequence byte D1
Z-Wave Error RCVD encryptedPacket: full raw packet 01 23 00 04 00 B8 1D 98 81 C4 75 D3 8F A8 80 06 E0 33 6E 9D 64 9D B7 EE B5 BB 26 93 F0 6D 5B 3A 50 07 37 EF EF
Z-Wave Error RCVD encryptedPacket: encrypted packet 33 6E 9D 64 9D B7 EE B5 BB 26
Z-Wave Error RCVD encryptedPacket: decrypted packet D1 4C 68 0E 74 33 5A 7C 49 D6
Z-Wave Error RCVD encryptedPacket: unexpected sequence byte D1
Z-Wave Error RCVD encryptedPacket: full raw packet 01 23 00 04 00 B8 1D 98 81 C4 75 D3 8F A8 80 06 E0 33 6E 9D 64 9D B7 EE B5 BB 26 93 F0 6D 5B 3A 50 07 37 EF EF
Z-Wave Error RCVD encryptedPacket: encrypted packet 33 6E 9D 64 9D B7 EE B5 BB 26
Z-Wave Error RCVD encryptedPacket: decrypted packet D1 4C 68 0E 74 33 5A 7C 49 D6
Z-Wave Error send "Storage door 1 lock" lock failed
The distance between my Gen5 stick and the lock is not that great, maybe 10m (30 feet?) diagonal trough one wall and one roof (wood). Other devices further away work great.
I have rebooted my Indigo computer and removed/re-attached the Gen5 stick multiple times.
Any ideas? I've heard that the UZB1 is a better device than the Gen5 and that I can restore a Gen5 backup to a UZB1, maybe that is the way to go?!
Best regards, L