- Posted on
Mon Dec 04, 2023 4:59 pm
-
anyone
offline
-
- Posts: 125
- Joined: Apr 03, 2011
- Location: Norfolk, VA
I use Aqara FP2 Presence Sensors with Occupancy Zones by configuring X10 motion detectors as Dummy devices in HomeKit, which are published as Windows.
Using X10 motion detectors satisfies the plugin's requirement for an On/Off sensor. Configuring and publishing the X10 device to HomeKit removes the need for API integration. However, Home App automation is still necessary to control the published X10 device based on the FP2's Occupancy state.
In the Home App, Windows are conveniently grouped in the 'Security' section, allowing easy monitoring of room window/presences.
FP2s are added to Occupancy Zones. In rooms with additional sensors, like motion or door sensors, these are integrated into the Zone. The Zone is set to be occupied if 'Any' sensor is 'On'. I've set the 'Delay On' time to 0 seconds, the 'Delay Off' time to 600 seconds, and the 'Force Off' time also to 0 seconds.
Triggers monitor the Occupancy zone, activating lights and initiating various actions based on different conditions.
I am curious about alternative approaches, as I realized while documenting this setup that there might be more efficient methods.