Hi all,
I bought a Caséta starter kit from Lowes which includes the hub (not the Pro model), a dimmer switch, and a Pico remote.
I downloaded 7.3.2 of the Lutron RRA2/Caséta plug-in for Indigo 7.4.1 and have it installed.
The hub is on my network, and I used LanScan to identify its IP address.
I created a new Network Connected Gateway device, but the log is stuck on "Connecting via IP to 192.168.0.207:23"
Doing a port scan on the hub shows that ports 22, 8081, and 8083 are open.
Then I saw on the instructions here: https://github.com/FlyingDiver/Indigo-r ... on-for-Caséta-and-RRA2-Select-Systems
That the Pro hub is needed. Is this indeed the case?