GE Caddx NX-8E

Posted on
Thu Nov 16, 2017 6:38 pm
lanbrown offline
Posts: 522
Joined: Sep 26, 2017

Re: GE Caddx NX-8E

I'd be interested in it. I don't have a board with a serial port but they do sell a module to add it; I have an NX-6 v2. Probably easier than redoing the entire system.

Posted on
Thu Nov 16, 2017 6:57 pm
kw123 offline
User avatar
Posts: 5722
Joined: May 12, 2013
Location: Dallas, TX

Re: GE Caddx NX-8E

I have mine almost finished. Need to enable the sending of status changes in the nx system. Polling works.

Will post a version in the next days

In order to get your working you need the interface board nx584.
Then enable it on the alarm panel.


Sent from my iPhone using Tapatalk

Posted on
Sun Nov 19, 2017 8:14 pm
lanbrown offline
Posts: 522
Joined: Sep 26, 2017

Re: GE Caddx NX-8E

Thanks.

Is it written is AppleScript or Python?

Also, this might be a huge undertaking but what do you think of the NX-595E? It is a much more modern access method than the use of RS-232. It is Ethernet based and thus has an IP address. Since it has a web server and even SSL, you might be able to just load web pages and HTML to get what you want. It also supports DLX900 and if it is anything like DL900 it allows arming, disarming, etc.

Do you know what protocol the NX-584 uses? If it is DL900, then it might be fairly easy to use the NX-595E as it supports DLX900. So the plugin just might need to be IP aware rather than serial.

If you're interested, if I buy you (you get to keep it) the NX-595E would you create the plugin for it?

Here's the PDF from Interlogix:
http://static.interlogix.com/library/NX-595E%20Installation%20Manual-230553-ED03-18AUG15.pdf

Posted on
Sun Nov 19, 2017 8:54 pm
kw123 offline
User avatar
Posts: 5722
Joined: May 12, 2013
Location: Dallas, TX

Re: GE Caddx NX-8E

I have the serial version NX584E. Don't not like to use the IP version = just bought the new system last week.
In my world alarm systems should NOT be connected to the "ether net" (internet)

The serial ports works very well. Will post an updated version

You have access to all info of the alarm system and can set anything you like..

But it must be in the vicinity of your indigo mac .. through serial cable ( 10m ) ?

Karl

Posted on
Sun Nov 19, 2017 9:22 pm
lanbrown offline
Posts: 522
Joined: Sep 26, 2017

Re: GE Caddx NX-8E

Karl,

I wouldn't connect it to the Internet, that is what a firewall is for. The alternative would be not to set a default gateway of the board and thus it would only be able to access local (same subnet) devices. One advantage to the IP board though it, it supports NTP so the time would always be correct on the system. With a real firewall it could be on its own system and then you would only allow Indigo to access it and for it to access a local NTP server.

The RS-232 spec lists 50 feet but also part of the spec is capacitance of 2500 pF. There is about 150 feet between my panel and where the Indigo server is. I could do an RS-232 over IP converter and then a virtual serial port on the Mac.

Posted on
Sun Nov 19, 2017 9:54 pm
kw123 offline
User avatar
Posts: 5722
Joined: May 12, 2013
Location: Dallas, TX

GE Caddx NX-8E

Yes I understand you can isolate the alarm system virtually. But I like to make it physically.

As for time. I believe you can set it from theme mac. And ntp would require internet access or you would need a local ntp server.

In my setup the mac is next to the alarm system. The comm is pretty simple. So guess a set up through serial-ip- aerial might work

The good thing is everyone has the choice to do what he/she believes is the best for them.




Sent from my iPhone using Tapatalk

Posted on
Sun Nov 19, 2017 10:40 pm
kw123 offline
User avatar
Posts: 5722
Joined: May 12, 2013
Location: Dallas, TX

Re: GE Caddx NX-8E

have ordered

USRIOT USR-TCP232-T2 Tiny Serial Ethernet Converter Module Serial UART TTL to Ethernet TCPIP Module Support DHCP and DNS $15.94,

will check it out if it works.

Karl

Posted on
Mon Nov 20, 2017 11:17 am
kw123 offline
User avatar
Posts: 5722
Joined: May 12, 2013
Location: Dallas, TX

Re: GE Caddx NX-8E

This is a modified version from the original:
https://www.dropbox.com/s/dfe6ab0z6s2ne56/Caddx%20Security%20System-v-7.4.2.zip?dl=1

changes:
1. uses indigo 7 features i.e. bulk update of states
2. added error control around serial communication. went from 1/10 comm errors (i.e. when reading whole database) to 1/day (handles message too short = continue to read; received 1.5 package, continue to read, use 2. message) if read error persists re-try 6 times (has not failed yet)
3. changed zone device type to custom: state column shows read/green/grey for : tripped/ normal/ other
4. added states "lastTripped", "lastNormal" time stamp ==> you can see when the door last opened/closed
5. added "read all zones" action to update all zones at once
6. added "read all zones" to watchdog function
7. added support for other NX models, i.e. NX8v2 and other
8. added field to set the folder name for CADDX devices and variables in config
9. recycle 2 variables at reload (Caddx_receiveMessage / Caddx_sendingMessage) = delete and recreate to reduce the space in SQL history databases
10. fixed some smaller bugs
12. added -- readOnly comments to config, device edit screens to make it clearer which items can be changed

and all the credit should go to Ian, he did 99% of the work. This is just fine tuning


Karl

Posted on
Fri Mar 02, 2018 6:46 am
outsidenwnc offline
Posts: 14
Joined: Apr 20, 2014

Re: GE Caddx NX-8E

I have a NX-8V2, just ordered a 584 card and will be setting this up in the next week or 2 . - THANK YOU

Posted on
Sun Sep 09, 2018 8:45 pm
lanbrown offline
Posts: 522
Joined: Sep 26, 2017

Re: GE Caddx NX-8E

IanS wrote:
For the NX-8, the NX-584 serial board has the same configuration as the NX-8e but the memory locations are different.

NX-8 (NX-584 board) NX-8e
location 0 location 209 Home Automation Protocol
location 1 location 208 Serial Port Baud Rate
location 2 location 210 Transition Based Broadcasts
location 3 location 211 Command / Request Enabled
location 4 location 212 LCD Keypad Address "192" Keypad "1" Partition "1"

The serial interface is a 3 wire only connection 2 (Tx) , 3 (Rx) and 7 (Ground).

Let me know how you get on.


I've installed the NX-584E in my system but waiting until cooler weather before going into the attic to run a cable down to the panel for the serial port/Ethernet conversion. What settings have others configured?

Location 0 I have binary configured

Location 1 I have 76800 Baud

Location 2 Segment 1 I have 2 5 7 selected

Code: Select all
Segment 1:
DATA ENABLES TRANSITION
1 Reserved
2 Interface Configuration at power-up / end of download / program mode
3-4 Reserved
5 Zone Status Message
6 Zones Snapshot Message
7 Partition Status Message
8 Partitions Snapshot Message


Location 2 Segment 2 I have 1 2 selected

Code: Select all
Segment 2:
DATA ENABLES TRANSITION
1 System Status Message
2 X-10 Message Received
3 Log Event Message
4 Keypad Message Received
5 - 8 Reserved


Location 3 Segment 1 I have 2 4 5 6 7 8 selected

Code: Select all
DATA SUPPORTED REQUEST / COMMAND
1 Reserved
2 Interface Configuration Request
3 Reserved
4 Zone Name Request
5 Zone Status Request
6 Zones Snapshot Request
7 Partition Status Request
8 Partitions Snapshot Request


Location 3 Segment 2 I have 1 2 3 selected

Code: Select all
Segment 2:
DATA SUPPORTED REQUEST / COMMAND
1 System Status Request
2 Send X-10 Message
3 Log Event Request
4 Send Keypad Text Message
5 Keypad Terminal Mode Request
6 - 8 Reserved


Location 3 Segment 3 I have nothing selected

Code: Select all
Segment 3:
DATA SUPPORTED REQUEST / COMMAND
1 Program Data Request
2 Program Data Command
3 User Information Request with PIN
4 User Information Request without PIN
5 Set User Code Command with PIN
6 Set User Code Command without PIN
7 Set User Authorization Command with PIN
8 Set User Authorization Command without PIN


Location 3 Segment 4 I have 4 7 selected

Code: Select all
Segment 4:
DATA SUPPORTED REQUEST / COMMAND
1 Reserved
2 Reserved
3 Store Communication Event Command
4 Set Clock / Calendar Command
5 Primary Keypad Function with PIN
6 Primary Keypad Function without PIN
7 Secondary Keypad Function
8 Zone Bypass Toggle


Location 4 I have 192

Who is online

Users browsing this forum: No registered users and 1 guest