ZooZ Zen25 Double Plug

Posted on
Fri Nov 29, 2019 10:48 am
aldera offline
User avatar
Posts: 114
Joined: Aug 30, 2016
Location: Michigan, USA

ZooZ Zen25 Double Plug

Does anyone have at the fairly new Zooz ZEN25 (double plug module) that they're currently using under Indigo? I see that the ZEN15 and ZEN20 are supported and wondering if it'll work without having a new device definition. Thanks.

Ralph

Posted on
Fri Nov 29, 2019 11:56 am
matt (support) offline
Site Admin
User avatar
Posts: 20016
Joined: Jan 27, 2003
Location: Texas

Re: ZooZ Zen25 Double Plug

Hi Ralph,

I just checked and we do have a device info report submitted by someone that has one. It sounds like only 1 outlet is controllable from Indigo currently, so we'll look at adding a definition to get both outlets working correctly.

Image

Posted on
Sat Nov 30, 2019 12:06 pm
aldera offline
User avatar
Posts: 114
Joined: Aug 30, 2016
Location: Michigan, USA

Re: ZooZ Zen25 Double Plug

matt (support) wrote:
Hi Ralph,

I just checked and we do have a device info report submitted by someone that has one. It sounds like only 1 outlet is controllable from Indigo currently, so we'll look at adding a definition to get both outlets working correctly.


Great. I'lll probably get one then and look for the update in your next release.

Thanks.

Ralph

Posted on
Mon Dec 02, 2019 4:21 pm
aldera offline
User avatar
Posts: 114
Joined: Aug 30, 2016
Location: Michigan, USA

Re: ZooZ Zen25 Double Plug

matt (support) wrote:
Hi Ralph,

I just checked and we do have a device info report submitted by someone that has one. It sounds like only 1 outlet is controllable from Indigo currently, so we'll look at adding a definition to get both outlets working correctly.



Here's the logging for the sync of my device in case the model number is different:

Code: Select all
  Z-Wave                          Syncing - started for "073 - Relay Power Switch"
   Z-Wave                          Syncing - retrieved module neighbors list: 2, 6, 9, 10, 16, 25, 37, 38, 39, 41, 47, 48, 50, 53, 58, 66, 70
   Z-Wave                          Syncing - assigning return route to "073 - Relay Power Switch"
   Z-Wave                          Syncing - assigned return route
   Z-Wave                          Syncing - retrieved manufacture and model names: Zooz - 027A, Relay Power Switch - A000A003
   Z-Wave                          Syncing - retrieved protocol version 5.03, app version 2.00
   Z-Wave                          Syncing - retrieved class hierarchy: Routing Slave : Relay Switch : Relay Power Switch (04 : 10 : 01, base 25)
   Z-Wave                          Syncing - retrieved command classes: 20v1 60v4 25v1 86v1 27v1 6Cv1 72v1 8Ev1 70v1 71v1 32v4 73v1 55v1 59v1 5Av1 85v1 7Av1 5Ev1 9Fv1
   Z-Wave                          Syncing - retrieved encrypt commands: - none -
   Z-Wave                          Syncing - retrieved capabilities: routing, beaming
   Z-Wave                          Syncing - retrieved multi-endpoint types: 1:(10 : 01), 2:(10 : 01), 3:(10 : 01)
   Z-Wave                          Syncing - retrieved multi-endpoint classes: 1:[5E 85 59 8E 25 32 6C 9F], 2:[5E 85 59 8E 25 32 6C 9F], 3:[5E 85 59 8E 25 32 6C 9F]
   Z-Wave                          Syncing - retrieved group 1 associations: []
   Z-Wave                          Syncing - retrieved group 2 associations: []
   Z-Wave                          Syncing - retrieved group 3 associations: []
   Z-Wave                          Syncing - added group 1 association to interface
   Z-Wave                          Syncing - created device "073 - Relay Switch"
   Z-Wave                          Syncing - created device "073 - Relay Switch 2"
   Z-Wave                          Syncing - created device "073 - Relay Switch 3"
   Z-Wave                          Syncing - complete


And here's the logging when hitting the button on the Configure panel:

Code: Select all
Indigo Z-Wave Version: 7.4.0
Node ID: 73
Model: Relay Power Switch
Model ID: A000A003
Manufacturer: Zooz
Manufacturer ID: 027A
Protocol Version: 5.03
Application Version: 2.00
Model Definition Version: 0
Library Type: 3
Class Name: Relay Power Switch
Class Hierarchy: 04 : 10 : 01
Command Class Base: 25
Command Versions: 20v1 60v4 25v1 86v1 27v1 6Cv1 72v1 8Ev1 70v1 71v1 32v4 73v1 55v1 59v1 5Av1 85v1 7Av1 5Ev1 9Fv1
Encryption Status: Not Supported
Multi-Endpoint Types: 1:(10 : 01), 2:(10 : 01), 3:(10 : 01)
Multi-Endpoint Classes: 1:[5E 85 59 8E 25 32 6C 9F], 2:[5E 85 59 8E 25 32 6C 9F], 3:[5E 85 59 8E 25 32 6C 9F]
Multi-Instance Counts: - none -
Features: routing, beaming, energyMeter
Neighbors: 2, 6, 9, 10, 16, 25, 37, 38, 39, 41, 47, 48, 50, 53, 58, 66, 70
Associations: 1:[1] 2:[] 3:[]
Config Values: - none -


Ralph

Posted on
Tue Dec 24, 2019 8:35 am
dduff617 offline
Posts: 517
Joined: Jul 05, 2006

Re: ZooZ Zen25 Double Plug

i just bought a few of these. When including in Indigo, they come through as three devices. One controls the right outlet, one controls both outlets, and the third contols nothing. I would also like to see support for this.

Posted on
Mon Jan 20, 2020 6:18 pm
Espressomatic offline
Posts: 29
Joined: Dec 30, 2018

Re: ZooZ Zen25 Double Plug

I've been using this outlet since November - I must have submitted a duplicate sometime in December. Coincidentally, I didn't see this forum post AND I had been using port #2 with my Christmas tree. I didn't notice until today that the main device controls both outlets at once - or maybe I'd just forgotten since November. :)

The outlet is now pulling aquarium duty for my daughter's newly set up tank, with one outlet dedicated to lighting and the other to a solenoid on a CO2 tank. Thankfully it's OK to have both turn on at once right now, but looking forward to full support nevertheless.

Posted on
Fri Feb 07, 2020 2:45 pm
matt (support) offline
Site Admin
User avatar
Posts: 20016
Joined: Jan 27, 2003
Location: Texas

Re: ZooZ Zen25 Double Plug

Indigo 7.4.1 is now available and includes support for the Zooz Dimmer Switch (ZEN27), Relay Switches (ZEN21, ZEN26), and Double Plug (ZEN25).

Image

Posted on
Wed Feb 26, 2020 8:45 am
roquej offline
User avatar
Posts: 360
Joined: Jan 04, 2015

Re: ZooZ Zen25 Double Plug

Is there a way to turn off the "energy reporting"?

JP

Posted on
Wed Feb 26, 2020 9:35 am
aldera offline
User avatar
Posts: 114
Joined: Aug 30, 2016
Location: Michigan, USA

Re: ZooZ Zen25 Double Plug

roquej wrote:
Is there a way to turn off the "energy reporting"?

JP


If you go to "Edit Device Settings" for the device, there's a textbox labeled, "Periodic Energy Reports." If you enter "0", it should disable reporting.
Attachments
plug.jpg
plug.jpg (94.92 KiB) Viewed 441 times

Posted on
Wed Feb 26, 2020 9:53 am
roquej offline
User avatar
Posts: 360
Joined: Jan 04, 2015

Re: ZooZ Zen25 Double Plug

Thank you for the suggestions. A quick question:

Will this option removes the update in the log or it just turns reporting off, which will affect the total details?

JP

Posted on
Wed Feb 26, 2020 10:23 am
matt (support) offline
Site Admin
User avatar
Posts: 20016
Joined: Jan 27, 2003
Location: Texas

Re: ZooZ Zen25 Double Plug

That will reduce the number of reports sent by the module.

Image

Posted on
Wed Feb 26, 2020 12:16 pm
roquej offline
User avatar
Posts: 360
Joined: Jan 04, 2015

Re: ZooZ Zen25 Double Plug

Thank you.

I increased the number to 1200, as making it zero doesn't't work for me. It gives me an error and you can't close the dialog.

JP

Posted on
Thu Apr 16, 2020 7:10 am
roquej offline
User avatar
Posts: 360
Joined: Jan 04, 2015

Re: ZooZ Zen25 Double Plug

It seems the "Periodic power reports" and "Periodic energy reports" parameters don't do anything. Tried setting to 0 (disable) and I get an error. See the picture enclosed.

What am I doing wrong?

Thanks,

JP
Attachments
Screen Shot 2020-04-16 at 7.29.25 AM.png
Screen Shot 2020-04-16 at 7.29.25 AM.png (102.93 KiB) Viewed 252 times

Posted on
Thu Apr 16, 2020 11:07 am
aldera offline
User avatar
Posts: 114
Joined: Aug 30, 2016
Location: Michigan, USA

Re: ZooZ Zen25 Double Plug

roquej wrote:
It seems the "Periodic power reports" and "Periodic energy reports" parameters don't do anything. Tried setting to 0 (disable) and I get an error. See the picture enclosed.

What am I doing wrong?

Thanks,

JP


Looks like the range limits of 30 to 2678400 for each parameter is overriding the ability to enter any number below 30, including the 0. I get the same results.

RS

Posted on
Thu Apr 16, 2020 11:11 am
roquej offline
User avatar
Posts: 360
Joined: Jan 04, 2015

Re: ZooZ Zen25 Double Plug

aldera wrote:
roquej wrote:
It seems the "Periodic power reports" and "Periodic energy reports" parameters don't do anything. Tried setting to 0 (disable) and I get an error. See the picture enclosed.

What am I doing wrong?

Thanks,

JP


Looks like the range limits of 30 to 2678400 for each parameter is overriding the ability to enter any number below 30, including the 0. I get the same results.

RS


Yep, and it doesn't matter what number I put in, get status reports every 2 min or so.

JP

Who is online

Users browsing this forum: No registered users and 7 guests

cron