Home kit sets Fibaro RGBW to wrong colour

Posted on
Wed Nov 06, 2019 8:17 am
designpeg offline
Posts: 2
Joined: Oct 15, 2018

Home kit sets Fibaro RGBW to wrong colour

Has anyone got any advice on getting Fibaro RGBW module to set the correct colour with homekit?

My module works perfectly in Indigo, and appears as an rgbw device in Homekit on my phone, but when I set a colour it sets a totally different colour - normally always either blue, or a shade of white. I can see it the log that arg out of range error occurs when trying to set the colour.

Anyone got a solution or workaround?

Posted on
Tue Apr 28, 2020 6:22 am
7rdr7 offline
Posts: 45
Joined: Aug 16, 2017
Location: Washington DC Metro

Re: Home kit sets Fibaro RGBW to wrong colour

I may have a similar issue. I installed Inovelli RGBW bulbs, which are supported by Indigo, and added them to Homekit Bridge. I can turn the bulbs on/off, and dim, but the color palettes in the Home app do not function. It appears that the bulb wants a setting of 1-100, and the app is pushing higher values. That said, no matter what color that I select from the Home app, the color of the bulb does not change. I can only set the color from the Indigo client interface. Anyone seeing anything similar?

Z-Wave Error chr() arg not in range(256)
Z-Wave Error chr() arg not in range(256)
Z-Wave Error chr() arg not in range(256)
Z-Wave Error chr() arg not in range(256)
Z-Wave Error chr() arg not in range(256)
Z-Wave Error chr() arg not in range(256)
Z-Wave Error chr() arg not in range(256)
Z-Wave Error chr() arg not in range(256)
Z-Wave Error chr() arg not in range(256)
Z-Wave Error chr() arg not in range(256)
Z-Wave Error chr() arg not in range(256)
Z-Wave Error chr() arg not in range(256)
Z-Wave Error chr() arg not in range(256)
Z-Wave received "Main Pump" energy total to 252.659 kWh
Trigger Control Page Pump Power Cumulative
Z-Wave Error chr() arg not in range(256)
Trigger Armed Instant Variable Off
Z-Wave Error chr() arg not in range(256)
Z-Wave Error chr() arg not in range(256)
Trigger Occupancy - Main Floor Motion Detectors
Action Group Set Main Floor Occupancy ON
Virtual Devices sent "Main Floor Occupancy" on
Z-Wave sent "Living Room Bulb" set brightness to 73
Z-Wave sent "Living Room Bulb" set brightness to 86
Z-Wave sent "Living Room Bulb" set brightness to 54
Z-Wave sent "Living Room Bulb" set brightness to 52
Z-Wave sent "Living Room Bulb" set brightness to 51
Z-Wave sent "Living Room Bulb" set brightness to 44
Z-Wave Error chr() arg not in range(256)
Z-Wave Error chr() arg not in range(256)
Z-Wave Error chr() arg not in range(256)
Trigger Armed Instant Variable Off
Z-Wave Error chr() arg not in range(256)
Z-Wave Error chr() arg not in range(256)
Z-Wave Error chr() arg not in range(256)
Z-Wave Error chr() arg not in range(256)
Z-Wave Error chr() arg not in range(256)
Z-Wave Error chr() arg not in range(256)
Z-Wave Error chr() arg not in range(256)
Z-Wave Error chr() arg not in range(256)
Z-Wave Error chr() arg not in range(256)
Z-Wave Error chr() arg not in range(256)

Page 1 of 1

Who is online

Users browsing this forum: No registered users and 0 guests