Fibaro Roller Shutter 2 Device Definition

Posted on
Tue Sep 18, 2018 5:24 am
kwijibo007 offline
Posts: 296
Joined: Sep 27, 2013
Location: Melbourne, Australia

Fibaro Roller Shutter 2 Device Definition

Hi Matt/Jay,

Could you please add a device definition for this Australian Fibaro Roller Shutter 2?

Code: Select all
Indigo Z-Wave Version: 2.0.111
Node ID: 17
Model: Motor Control Class B
Model ID: 03023000
Manufacturer: Fibaro System
Manufacturer ID: 010F
Protocol Version: 3.52
Application Version: 25.25
Model Definition Version: 0
Library Type: 3
Class Name: Motor Control Class B
Class Hierarchy: 04 : 11 : 06
Command Class Base: 26
Command Versions: 20v1 85v1 26v3 31v2 32v2 8Ev1 70v1 91v1 72v1 73v1 75v1 86v1 25v1
Encryption Status: Not Supported
Multi-Endpoint Types: - none -
Multi-Endpoint Classes: - none -
Multi-Instance Counts: - none -
Features: routing, beaming, energyMeter
Neighbors: 3, 4, 5, 7, 8, 9, 10, 11, 12
Associations: 1:[1] 2:[] 3:[]
Config Values: - none -


Thanks,

Pete

Posted on
Sun May 12, 2019 4:11 pm
matt (support) offline
Site Admin
User avatar
Posts: 19436
Joined: Jan 27, 2003
Location: Texas

Re: Fibaro Roller Shutter 2 Device Definition

Indigo 7.3 (and 7.3.1) are now available and should support the Fibaro Shutter Controller (FGRM222)

Image

Posted on
Mon Jun 10, 2019 3:54 pm
chrish offline
Posts: 4
Joined: Mar 14, 2018

Re: Fibaro Roller Shutter 2 Device Definition

Hi Matt/Jay,

could you please add the newest Version of the Fibaro Roller Shutter 3? FGR-223 EU 5.1?

Indigo Z-Wave Version: 2.0.124
Node ID: 72
Model: Motor Control Class B
Model ID: 03031000
Manufacturer: Fibaro System
Manufacturer ID: 010F
Protocol Version: 6.02
Application Version: 5.01
Model Definition Version: 0
Library Type: 3
Class Name: Motor Control Class B
Class Hierarchy: 04 : 11 : 06
Command Class Base: 26
Command Versions: 20v1 85v1 86v1 8Ev1 55v1 56v1 98v1 59v1 5Av1 5Bv1 5Ev1 9Fv1 60v4 22v1 25v1 26v4 6Cv1 32v3 70v1 71v1 72v1 73v1 75v1 7Av1
Encryption Status: Supported but not Enabled
Multi-Endpoint Types: 1:(11 : 06), 2:(11 : 06)
Multi-Endpoint Classes: 1:[5E 26 85 8E 59 98 9F 6C 32 71 22], 2:[5E 26 85 8E 59 98 9F 6C 22]
Multi-Instance Counts: - none -
Features: routing, beaming, security, energyMeter
Neighbors: 3, 4, 5, 6, 7, 9, 11, 12, 13, 16, 18, 33, 36, 41, 52, 62, 63
Associations: 1:[1] 2:[] 3:[]
Config Values: - none -


Thank you in advance!!
cheers
Chris

Posted on
Mon Jun 10, 2019 5:59 pm
matt (support) offline
Site Admin
User avatar
Posts: 19436
Joined: Jan 27, 2003
Location: Texas

Re: Fibaro Roller Shutter 2 Device Definition

Hi Chris – Added to the list!

Image

Posted on
Fri Jun 14, 2019 8:27 am
joesan offline
Posts: 60
Joined: Feb 12, 2008

Re: Fibaro Roller Shutter 2 Device Definition

Does "added to the list" mean it's done or it's on the To Do list? If the latter, can we still use the Fibaro Roller Shutter 3 before it's officially added? I've just bought 2 and would like to use them.

Posted on
Fri Jun 14, 2019 10:53 am
jay (support) offline
Site Admin
User avatar
Posts: 15856
Joined: Mar 19, 2008
Location: Austin, Texas

Re: Fibaro Roller Shutter 2 Device Definition

joesan wrote:
Does "added to the list" mean it's done or it's on the To Do list?


Added to the feature request list for a future version ("added to the list" is shorthand for that).

You might be able to use them by catching/sending raw commands (though we don't know what they are until we look into it, which is what we'll do when we actually do the work to add it).

Jay (Indigo Support)
Twitter | Facebook | LinkedIn

Posted on
Fri Jun 14, 2019 4:04 pm
matt (support) offline
Site Admin
User avatar
Posts: 19436
Joined: Jan 27, 2003
Location: Texas

Re: Fibaro Roller Shutter 2 Device Definition

I believe for the Roller Shutter 1 and 2 they would work in Indigo before we added a definition (the def'n just added config UI). So if the Roller Shutter 3 works similarly then it might work out-of-the-box right now. Maybe Chris from above will chime in with his experience using it with Indigo.

Image

Posted on
Sat Jun 15, 2019 11:54 am
neilk offline
Posts: 209
Joined: Jul 13, 2015
Location: Reading, UK

Re: Fibaro Roller Shutter 2 Device Definition

I have the roller shutter 3, and as Matt says it works fine, it just lacks the config UI. It looks to be the same definition as Chrish posted. It was a bit of a faff to setup without it but works without a problem once setup.

Code: Select all
Indigo Z-Wave Version: 2.0.124
Node ID: 84
Model: Motor Control Class B
Model ID: 03031000
Manufacturer: Fibaro System
Manufacturer ID: 010F
Protocol Version: 6.02
Application Version: 5.00
Model Definition Version: 0
Library Type: 3
Class Name: Motor Control Class B
Class Hierarchy: 04 : 11 : 06
Command Class Base: 26
Command Versions: 85v1 86v1 8Ev1 98v1 9Fv1 20v1 22v1 25v1 26v4 32v3 55v1 56v1 59v1 5Av1 5Bv1 5Ev1 60v4 6Cv1 70v1 71v1 72v1 73v1 75v1 7Av1
Encryption Status: Supported but not Enabled
Multi-Endpoint Types: 1:(11 : 06), 2:(11 : 06)
Multi-Endpoint Classes: 1:[5E 26 85 8E 59 98 9F 6C 32 71 22], 2:[5E 26 85 8E 59 98 9F 6C 22]
Multi-Instance Counts: - none -
Features: routing, beaming, security, energyMeter
Neighbors: 3, 5, 6, 8, 9, 12, 13, 14, 15, 18, 26, 27, 28, 29, 30, 33, 34, 50, 51, 53, 59, 75, 76, 77, 78, 79, 80, 81, 85, 86
Associations: 1:[1] 2:[] 3:[]
Config Values: - none -

Posted on
Mon Jun 17, 2019 2:38 pm
joesan offline
Posts: 60
Joined: Feb 12, 2008

Re: Fibaro Roller Shutter 2 Device Definition

Thanks all. That's great news! I appreciate you taking the time to give the info Neil.

Posted on
Mon Jun 17, 2019 3:16 pm
neilk offline
Posts: 209
Joined: Jul 13, 2015
Location: Reading, UK

Re: Fibaro Roller Shutter 2 Device Definition

No problem - let me know if you hit any problems and we can compare notes.
Neil

Posted on
Mon Dec 02, 2019 4:30 pm
palantir offline
Posts: 40
Joined: Sep 24, 2014

Re: Fibaro Roller Shutter 2 Device Definition

neilk wrote:
I have the roller shutter 3, and as Matt says it works fine, it just lacks the config UI. It looks to be the same definition as Chrish posted. It was a bit of a faff to setup without it but works without a problem once setup.

Code: Select all
Indigo Z-Wave Version: 2.0.124
Node ID: 84
Model: Motor Control Class B
Model ID: 03031000
Manufacturer: Fibaro System
Manufacturer ID: 010F
Protocol Version: 6.02
Application Version: 5.00
Model Definition Version: 0
Library Type: 3
Class Name: Motor Control Class B
Class Hierarchy: 04 : 11 : 06
Command Class Base: 26
Command Versions: 85v1 86v1 8Ev1 98v1 9Fv1 20v1 22v1 25v1 26v4 32v3 55v1 56v1 59v1 5Av1 5Bv1 5Ev1 60v4 6Cv1 70v1 71v1 72v1 73v1 75v1 7Av1
Encryption Status: Supported but not Enabled
Multi-Endpoint Types: 1:(11 : 06), 2:(11 : 06)
Multi-Endpoint Classes: 1:[5E 26 85 8E 59 98 9F 6C 32 71 22], 2:[5E 26 85 8E 59 98 9F 6C 22]
Multi-Instance Counts: - none -
Features: routing, beaming, security, energyMeter
Neighbors: 3, 5, 6, 8, 9, 12, 13, 14, 15, 18, 26, 27, 28, 29, 30, 33, 34, 50, 51, 53, 59, 75, 76, 77, 78, 79, 80, 81, 85, 86
Associations: 1:[1] 2:[] 3:[]
Config Values: - none -


Neil, I am (trying to) use the same but am struggling. My 2 Fibaro Roller Shutter 3's are added to my system and there seems to be communication (I hear them clicking) but the curtains simple do not open reliably. It used to work (so-so). Sometimes curtains opened, sometimes not. I tried to recalibrate them and since then nothing works anymore. Tried to factory reset and re-add to Indigo, but currently my curtains wont close anymore.

Do you use them to control curtains as well? Did you have to do anything special, like calibrating them?

Thanks,
Ronald

Page 1 of 1

Who is online

Users browsing this forum: Google [Bot] and 0 guests