Fibaro Z-wave door/window sensor (FGDW-002)

Posted on
Mon Jun 11, 2018 2:22 pm
Gman34798 offline
Posts: 19
Joined: Jun 10, 2018

Fibaro Z-wave door/window sensor (FGDW-002)

Now to begin with, this sensor is not listed in the supported device list, unless I overlooked it twice...

Has anyone used this with any success? I can get it included into the network as a Notification Sensor.
Battery status shows up fine. Sending a Status Request returns a not acknowledged message in red type.
The temperature sensor also does not show up when the unit is included as well.

Any thoughts?

Posted on
Mon Jun 11, 2018 2:45 pm
howartp offline
Posts: 3292
Joined: Jan 09, 2014
Location: West Yorkshire, UK

Re: Fibaro Z-wave door/window sensor (FGDW-002)

It sounds unlikely it's currently supported based on your experiences and the support list you referenced.

Submit the device info to Matt/Jay using the button in edit-device and they'll get it added at some point.


Sent from my iPad using Tapatalk Pro

Posted on
Mon Jun 11, 2018 2:58 pm
jay (support) offline
Site Admin
User avatar
Posts: 14408
Joined: Mar 19, 2008
Location: Austin, Texas

Re: Fibaro Z-wave door/window sensor (FGDW-002)

Odd - it appears we added some version of that sensor in 7.1 (it's possible Fibaro updated the firmware and the model ID since then). Definitely submit the device information from the device edit dialog (if we don't know about a device, there will be a button titled Submit to Indigo Domotics in the device's config dialog - click that and fill out the form and it will send us the information). If that button doesn't show up, then click the Write Device Details to Event Log button and copy/paste the results from the Event Log Window into a reply post here.

Jay (Indigo Support)
Twitter | Facebook | LinkedIn

Posted on
Mon Jun 11, 2018 3:49 pm
Gman34798 offline
Posts: 19
Joined: Jun 10, 2018

Re: Fibaro Z-wave door/window sensor (FGDW-002)

Just submitted to Indigo, good luck!

Posted on
Thu Jun 28, 2018 4:39 pm
Gman34798 offline
Posts: 19
Joined: Jun 10, 2018

Re: Fibaro Z-wave door/window sensor (FGDW-002)

Hey folks,
Any thoughts on whether I need to replace these 4 door sensors or wait it out for Indigo to load a supported profile for them?

Thanks in advance!

Posted on
Thu Jun 28, 2018 4:45 pm
howartp offline
Posts: 3292
Joined: Jan 09, 2014
Location: West Yorkshire, UK

Re: Fibaro Z-wave door/window sensor (FGDW-002)

Given they’ve already got a profile for this module, just with a different ID, it won’t take long to get them supported.


Sent from my iPhone using Tapatalk Pro

Posted on
Fri Jun 29, 2018 2:59 pm
matt (support) offline
Site Admin
User avatar
Posts: 18464
Joined: Jan 27, 2003
Location: Texas

Re: Fibaro Z-wave door/window sensor (FGDW-002)

We'll definitely have this one working in the next release. No ETA yet – we had hoped to have it out a while back but have run into some stability problems that have to be addressed first.

Image

Posted on
Fri Jun 29, 2018 3:57 pm
Gman34798 offline
Posts: 19
Joined: Jun 10, 2018

Re: Fibaro Z-wave door/window sensor (FGDW-002)

That sounds good folks! I may replace a few of these as they are in key locations, and relocate them to less important sites. My few other door sensors integrated right into Indigo without issue.

Page 1 of 1

Who is online

Users browsing this forum: No registered users and 0 guests