WallMote Quad

Posted on
Sun Apr 15, 2018 4:48 pm
petematheson offline
Posts: 698
Joined: Sep 14, 2014
Location: Southampton, UK

Re: WallMote Quad

Anybody figured out how to stop it flashing every so often on its own?
Sucks as it can’t be used for bedrooms, and 3 of the ones I bought were planned for that!


Sent from my iPhone using Tapatalk

Posted on
Sun Apr 15, 2018 4:59 pm
howartp offline
Posts: 3309
Joined: Jan 09, 2014
Location: West Yorkshire, UK

Re: WallMote Quad

What’s your poll frequency set to?

If you turn it down to never, does it stop flashing?


Sent from my iPhone using Tapatalk Pro

Posted on
Mon Apr 16, 2018 1:26 am
CliveS offline
Posts: 315
Joined: Jan 10, 2016
Location: Medomsley, County Durham, UK

Re: WallMote Quad

I have set mine to poll once per day to update the battery level (at 14.30) and no grief yet from the Boss as it is her side of the bed

CliveS

Indigo 7.1.1 : Mac mini Server (Mid 2011) : MacOS Sierra 10.12.6

Posted on
Mon Apr 16, 2018 1:45 pm
petematheson offline
Posts: 698
Joined: Sep 14, 2014
Location: Southampton, UK

Re: WallMote Quad

Ah, so simple. Seems to be working !

Posted on
Fri Aug 03, 2018 5:20 am
steveoidm offline
Posts: 29
Joined: Jun 28, 2015

Re: WallMote Quad

Just paired mine up but I think i'm missing something. I see the button presses coming through but how do I actually link that to an action?

Posted on
Fri Aug 03, 2018 5:32 am
autolog offline
Posts: 2337
Joined: Sep 10, 2013
Location: West Sussex

Re: WallMote Quad

steveoidm wrote:
Just paired mine up but I think i'm missing something. I see the button presses coming through but how do I actually link that to an action?

Set-up a new trigger: Z-Wave Command Received > Incoming Command Received from Device and then Edit Event settings... and select from the list of different button presses. Then set-up the Action you want to perform. :)

Posted on
Fri Aug 03, 2018 7:27 am
steveoidm offline
Posts: 29
Joined: Jun 28, 2015

Re: WallMote Quad

Awesome, got it. Thanks!

Posted on
Fri Aug 03, 2018 10:08 am
Suncroft offline
Posts: 30
Joined: Dec 08, 2014
Location: North Yorkshire, UK

Re: WallMote Quad

I Recieved 3 of these units recently and while you can do a direct z-wave device association to dim a device I found it to be very fiddly to get an accurate dim/brightness level on the WallMote Quad due to the size of the touch area. I found a better way for me personally was to setup a trigger for single press to toggle my light on/off and then setup another trigger based on button held to use the EPS - Smart Dimmer plugin action to cycle through dim/bright for the light. Thought this may be useful for others who are looking for a way to cycle through dimming and brightening with a single hold action.

Who is online

Users browsing this forum: No registered users and 0 guests