- Posted on
Sun Jul 26, 2015 12:30 pm
-
cdeggz
offline
-
- Posts: 33
- Joined: Nov 30, 2014
I'm having issues with my EZIO8SA. I'm assuming this is a hardware issue and not an indigo one?
It normally works without issue, but every now and then, instead of flipping the input that it is supposed to flip, it flips all the other inputs instead.
Input 4 is tied to the motion detector. Normally it flips back and forth as we go by, but about once a week, when input 4 should flip, input 4 stays the same, and the other 7 inputs flip instead. Very strange.
Unfortunately when this happens it turns on all the lights in the house, starts the fans, sprinklers, etc.
Activity log below. The first four are normal behavior. The last is the erratic one.
Jul 25, 2015, 8:13:47 PM
Received INSTEON "EZIO8SA" inputs status changed: 1, 1, 0, 0, 1, 1, 0
Received INSTEON "EZIO8SA" inputs status changed: 1, 1, 0, 1, 1, 1, 0
Received INSTEON "EZIO8SA" inputs status changed: 1, 1, 0, 0, 1, 1, 0
Received INSTEON "EZIO8SA" inputs status changed: 1, 1, 0, 1, 1, 1, 0
Jul 25, 2015, 8:16:44 PM
Received INSTEON "EZIO8SA" inputs status changed: 0, 0, 1, 1, 0, 0, 1