Onkyo Network Remote Feedback and Discussion

[RogueProeliator]

The documentation I am reading here about triggers shows commands for 3 triggers -- A, B, and C -- with On and Off commands for each. I assume that is what you are seeing as a Zone 2 trigger (perhaps other receiver models have more triggers).

I can add that action in to the plugin, but will be up to you to test it out and see how it works as I either don't have it, don't know about it or at the least don't use it! I'll let you know when a test version is available to try out.

Adam

[pereza1]

The documentation I am reading here about triggers shows commands for 3 triggers -- A, B, and C -- with On and Off commands for each. I assume that is what you are seeing as a Zone 2 trigger (perhaps other receiver models have more triggers).

I can add that action in to the plugin, but will be up to you to test it out and see how it works as I either don't have it, don't know about it or at the least don't use it! I'll let you know when a test version is available to try out.

Adam

Thank you!. And I will be happy to test it.

[RogueProeliator]

Download the latest version and give it a try... Set Auxiliary Trigger action. Please let me know if it works or not!

Adam

[pereza1]

Download the latest version and give it a try... Set Auxiliary Trigger action. Please let me know if it works or not!

Adam

Thanks Adam. Unfortunately, the activation of the Zone two trigger didn't yield any results.

I use Roomie for some remote management and I notice that powering on Zone two is what activates the +12v trigger. I'm hoping this helps you.

Below is the debug log from the test I ran using the latest version of the plug in. Note that I tried all three triggers.

Thanks again for all of your help!

Code: Select all

Nov 16, 2014 10:00:58 PM
  Onkyo Network Remote Plugin Debug Plugin preferences updated
  Onkyo Network Remote Plugin Debug Call to validate action: setAuxTriggerOnOff
  Action Group                    Set up Onkyo
  Onkyo Network Remote Plugin Debug Command queue has 3 command(s) waiting
  Onkyo Network Remote Plugin Debug Sending eISCP Command: PWR01
  Onkyo Network Remote Plugin Debug Send command completed.
  Onkyo Network Remote Plugin Debug Command queue has 2 command(s) waiting
  Onkyo Network Remote Plugin Debug Sending eISCP Command: PWRQSTN
  Onkyo Network Remote Plugin Debug Send command completed.
  Onkyo Network Remote Plugin Debug Received: ('system-power', 'on')
  Onkyo Network Remote Plugin Debug Found response match: devicePowerQuery
  Onkyo Network Remote Plugin Debug Effect execution: Update state 'isPoweredOn' to 'True' with UIValue 'On'
  Trigger                         Onkyo Powered On
  Onkyo Network Remote Plugin Debug Effect execution: Calling function updateVirtualMasterVolume
  Onkyo Network Remote Plugin Debug Command queue has 1 command(s) waiting
  Onkyo Network Remote Plugin Debug Sending eISCP Command: TGB01
  Onkyo Network Remote Plugin Debug Send command completed.
  Onkyo Network Remote Plugin Debug Received: ('12v-trigger-b', 'N/A')
  Onkyo Network Remote Plugin Debug Received w/o Command: ('system-power', 'on')
  Onkyo Network Remote Plugin Debug Found response match: devicePowerQuery
  Onkyo Network Remote Plugin Debug Effect execution: Update state 'isPoweredOn' to 'True' with UIValue 'On'
  Onkyo Network Remote Plugin Debug Effect execution: Calling function updateVirtualMasterVolume

Nov 16, 2014 10:01:55 PM
  Onkyo Network Remote Plugin Debug Call to validate action: setAuxTriggerOnOff
  Action Group                    Set up Onkyo
  Onkyo Network Remote Plugin Debug Command queue has 3 command(s) waiting
  Onkyo Network Remote Plugin Debug Sending eISCP Command: PWR01
  Onkyo Network Remote Plugin Debug Send command completed.
  Onkyo Network Remote Plugin Debug Command queue has 2 command(s) waiting
  Onkyo Network Remote Plugin Debug Sending eISCP Command: PWRQSTN
  Onkyo Network Remote Plugin Debug Send command completed.
  Onkyo Network Remote Plugin Debug Received: ('system-power', 'on')
  Onkyo Network Remote Plugin Debug Found response match: devicePowerQuery
  Onkyo Network Remote Plugin Debug Effect execution: Update state 'isPoweredOn' to 'True' with UIValue 'On'
  Onkyo Network Remote Plugin Debug Effect execution: Calling function updateVirtualMasterVolume
  Onkyo Network Remote Plugin Debug Command queue has 1 command(s) waiting
  Onkyo Network Remote Plugin Debug Sending eISCP Command: TGA01
  Onkyo Network Remote Plugin Debug Send command completed.
  Onkyo Network Remote Plugin Debug Received: ('system-power', 'on')
  Onkyo Network Remote Plugin Debug Found response match: devicePowerQuery
  Onkyo Network Remote Plugin Debug Effect execution: Update state 'isPoweredOn' to 'True' with UIValue 'On'
  Onkyo Network Remote Plugin Debug Effect execution: Calling function updateVirtualMasterVolume
  Onkyo Network Remote Plugin Debug Received w/o Command: ('12v-trigger-a', 'N/A')
  Onkyo Network Remote Plugin Debug Command queue has 1 command(s) waiting
  Onkyo Network Remote Plugin Debug Executing full status update request...
  Onkyo Network Remote Plugin Debug Command queue has 15 command(s) waiting
  Onkyo Network Remote Plugin Debug Sending eISCP Command: PWRQSTN
  Onkyo Network Remote Plugin Debug Send command completed.
  Onkyo Network Remote Plugin Debug Received: ('system-power', 'on')
  Onkyo Network Remote Plugin Debug Found response match: devicePowerQuery
  Onkyo Network Remote Plugin Debug Effect execution: Update state 'isPoweredOn' to 'True' with UIValue 'On'
  Onkyo Network Remote Plugin Debug Effect execution: Calling function updateVirtualMasterVolume
  Onkyo Network Remote Plugin Debug Command queue has 14 command(s) waiting
  Onkyo Network Remote Plugin Debug Sending eISCP Command: MVLQSTN
  Onkyo Network Remote Plugin Debug Send command completed.
  Onkyo Network Remote Plugin Debug Received: (('master-volume', 'volume'), '34')
  Onkyo Network Remote Plugin Debug Found response match: deviceMasterVolumeQuery
  Onkyo Network Remote Plugin Debug Effect execution: Update state 'masterVolumeLevel' to '52'
  Onkyo Network Remote Plugin Debug Effect execution: Calling function updateVirtualMasterVolume
  Onkyo Network Remote Plugin Debug Command queue has 13 command(s) waiting
  Onkyo Network Remote Plugin Debug Sending eISCP Command: AMTQSTN
  Onkyo Network Remote Plugin Debug Send command completed.
  Onkyo Network Remote Plugin Debug Command queue has 12 command(s) waiting
  Onkyo Network Remote Plugin Debug Sending eISCP Command: HAOQSTN
  Onkyo Network Remote Plugin Debug Send command completed.
  Onkyo Network Remote Plugin Debug Received: ('audio-muting', 'off')
  Onkyo Network Remote Plugin Debug Found response match: deviceIsMutedQuery
  Onkyo Network Remote Plugin Debug Effect execution: Update state 'isMuted' to 'False'
  Onkyo Network Remote Plugin Debug Effect execution: Calling function updateVirtualMasterVolume
  Onkyo Network Remote Plugin Debug Command queue has 11 command(s) waiting
  Onkyo Network Remote Plugin Debug Sending eISCP Command: SLIQSTN
  Onkyo Network Remote Plugin Debug Send command completed.
  Onkyo Network Remote Plugin Debug Received: ('hdmi-audio-out', 'off')
  Onkyo Network Remote Plugin Debug Found response match: deviceHDMIAudioOutQuery
  Onkyo Network Remote Plugin Debug Effect execution: Update state 'hdmiAudioOut' to 'False'
  Onkyo Network Remote Plugin Debug Command queue has 10 command(s) waiting
  Onkyo Network Remote Plugin Debug Sending eISCP Command: SPAQSTN
  Onkyo Network Remote Plugin Debug Send command completed.
  Onkyo Network Remote Plugin Debug Received: ('input-selector', ('dvd', 'bd', 'dvd'))
  Onkyo Network Remote Plugin Debug Found response match: deviceInputSelectorQuery
  Onkyo Network Remote Plugin Debug Effect execution: Calling function inputSelectorQueryReceived
  Onkyo Network Remote Plugin Debug Updating current input number/label: 10 / DVD, BD/DVD
  Onkyo Network Remote Plugin Debug Command queue has 9 command(s) waiting
  Onkyo Network Remote Plugin Debug Sending eISCP Command: SPBQSTN
  Onkyo Network Remote Plugin Debug Send command completed.
  Onkyo Network Remote Plugin Debug Command queue has 8 command(s) waiting
  Onkyo Network Remote Plugin Debug Sending eISCP Command: SLPQSTN
  Onkyo Network Remote Plugin Debug Send command completed.
  Onkyo Network Remote Plugin Debug Received: ('speaker-a', 'N/A')
  Onkyo Network Remote Plugin Debug Found response match: speakerAStatusQuery
  Onkyo Network Remote Plugin Debug Effect execution: Update state 'speakerAPower' to 'False'
  Onkyo Network Remote Plugin Debug Command queue has 7 command(s) waiting
  Onkyo Network Remote Plugin Debug Sending eISCP Command: HDOQSTN
  Onkyo Network Remote Plugin Debug Send command completed.
  Onkyo Network Remote Plugin Debug Received: ('hdmi-output-selector', ('both',))
  Onkyo Network Remote Plugin Debug Command queue has 6 command(s) waiting
  Onkyo Network Remote Plugin Debug Sending eISCP Command: RESQSTN
  Onkyo Network Remote Plugin Debug Send command completed.
  Onkyo Network Remote Plugin Debug Command queue has 5 command(s) waiting
  Onkyo Network Remote Plugin Debug Sending eISCP Command: VWMQSTN
  Onkyo Network Remote Plugin Debug Send command completed.
  Onkyo Network Remote Plugin Debug Received: ('monitor-out-resolution', 'auto')
  Onkyo Network Remote Plugin Debug Found response match: currentVideoOutResQuery
  Onkyo Network Remote Plugin Debug Effect execution: Update state 'videoOutputResolution' to 'auto'
  Onkyo Network Remote Plugin Debug Command queue has 4 command(s) waiting
  Onkyo Network Remote Plugin Debug Sending eISCP Command: VPMQSTN
  Onkyo Network Remote Plugin Debug Send command completed.
  Onkyo Network Remote Plugin Debug Command queue has 3 command(s) waiting
  Onkyo Network Remote Plugin Debug Sending eISCP Command: LMDQSTN
  Onkyo Network Remote Plugin Debug Send command completed.
  Onkyo Network Remote Plugin Debug Received: ('sleep-set', '00')
  Onkyo Network Remote Plugin Debug Found response match: deviceSleepTimerQuery
  Onkyo Network Remote Plugin Debug Effect execution: Update state 'sleepTimer' to '0'
  Onkyo Network Remote Plugin Debug Command queue has 2 command(s) waiting
  Onkyo Network Remote Plugin Debug Sending eISCP Command: SLAQSTN
  Onkyo Network Remote Plugin Debug Send command completed.
  Onkyo Network Remote Plugin Debug Received: ('listening-mode', ('plii', 'pliix-thx-cinema'))
  Onkyo Network Remote Plugin Debug Found response match: listeningModeQuery
  Onkyo Network Remote Plugin Debug Effect execution: Update state 'listeningMode' to 'plii, pliix-thx-cinema'
  Onkyo Network Remote Plugin Debug Command queue has 1 command(s) waiting
  Onkyo Network Remote Plugin Debug Sending eISCP Command: TUNQSTN
  Onkyo Network Remote Plugin Debug Send command completed.
  Onkyo Network Remote Plugin Debug Received: ('audio-selector', 'hdmi')
  Onkyo Network Remote Plugin Debug Received w/o Command: ('speaker-b', 'N/A')
  Onkyo Network Remote Plugin Debug Found response match: speakerBStatusQuery
  Onkyo Network Remote Plugin Debug Effect execution: Update state 'speakerBPower' to 'False'
  Onkyo Network Remote Plugin Debug Received w/o Command: ('tuning', '08750')
  Onkyo Network Remote Plugin Debug Received w/o Command: ('video-picture-mode', 'through')
  Onkyo Network Remote Plugin Debug Received w/o Command: ('video-wide-mode', 'auto')
  Onkyo Network Remote Plugin Debug Found response match: videoWideScreenModeQuery
  Onkyo Network Remote Plugin Debug Effect execution: Update state 'videoWideScreenMode' to 'auto'
  Onkyo Network Remote Plugin Debug Call to validate action: setAuxTriggerOnOff
  Action Group                    Set up Onkyo
  Onkyo Network Remote Plugin Debug Command queue has 3 command(s) waiting
  Onkyo Network Remote Plugin Debug Sending eISCP Command: PWR01
  Onkyo Network Remote Plugin Debug Send command completed.
  Onkyo Network Remote Plugin Debug Command queue has 2 command(s) waiting
  Onkyo Network Remote Plugin Debug Sending eISCP Command: PWRQSTN
  Onkyo Network Remote Plugin Debug Send command completed.
  Onkyo Network Remote Plugin Debug Received: ('system-power', 'on')
  Onkyo Network Remote Plugin Debug Found response match: devicePowerQuery
  Onkyo Network Remote Plugin Debug Effect execution: Update state 'isPoweredOn' to 'True' with UIValue 'On'
  Onkyo Network Remote Plugin Debug Effect execution: Calling function updateVirtualMasterVolume
  Onkyo Network Remote Plugin Debug Command queue has 1 command(s) waiting
  Onkyo Network Remote Plugin Debug Sending eISCP Command: TGC01
  Onkyo Network Remote Plugin Debug Send command completed.
  Onkyo Network Remote Plugin Debug Received: ('12v-trigger-c', 'N/A')

Nov 16, 2014 10:02:43 PM
  Onkyo Network Remote Plugin Debug Received w/o Command: ('system-power', 'standby')
  Onkyo Network Remote Plugin Debug Found response match: devicePowerQuery
  Onkyo Network Remote Plugin Debug Effect execution: Update state 'isPoweredOn' to 'False' with UIValue 'Standby'
  Trigger                         Onkyo Powered Off
  Onkyo Network Remote Plugin Debug Effect execution: Calling function updateVirtualMasterVolume

[RogueProeliator]

Give the latest version a try - I added a zone power command. Note that you will have to go into the Device Properties and mark that Zone 2 is connected before you will be able to select it in the action dialog box.

Adam

[pereza1]

You are the man!!! I will check it when I get home.

Thanks!

[pereza1]

Adam,

I did a quick test last night and it looks like it works!!!

I will be performing some more Indigo scripts later on this week and this will solve a LOT of issues for my needs!

I greatly appreciate your response!

Have a great day!

[pereza1]

Adam,

I'm happy to report that the Zone 2 power toggle works perfectly.

Thank you again!

[RogueProeliator]

No problem, glad to help!

[ethanw]

Is TX-NR609 supported?

[RogueProeliator]

Is TX-NR609 supported?

It should work just fine -- so far I haven't heard any in that line of receivers not working and I know that the 616 has been confirmed to work. I don't know if anyone has tried that specific model or not.

Adam

[ethanw]

Not working. Can't detect it

[RogueProeliator]

Based on the manual that I just pulled up, it should work, so let's start with the basics -- have you gone through the menu and setup the network? You will need to set three things:

• DHCP or IP Address (and Gateway if necessary)
• Network Control - Enabled
• Control Port - probably can keep the default, but make note of it

Assuming that is all done (or you have already done it), you might make note of the IP address and try pinging it. If it pings but the plugin doesn't recognize it in the drop down it still may be able to control it via directly entering the IP address and port -- there are various network factors that can prevent auto-detection of devices.

Adam

[polycron]

Adam,

Is there a control in the plugin to select an FM memory preset? Would that use the PRS command? Can the RDS command pull the FM RDS title and dump it into a variable? I'm also curious about the possibility of changing a Pandora Channel Is that what the NTC commands CHUP and CHDN are? I see you can pull artist/album information but I'm not sure if that is available from the Pandora selection.

Jeff

[RogueProeliator]

Is there a control in the plugin to select an FM memory preset? Would that use the PRS command? Can the RDS command pull the FM RDS title and dump it into a variable? I'm also curious about the possibility of changing a Pandora Channel Is that what the NTC commands CHUP and CHDN are? I see you can pull artist/album information but I'm not sure if that is available from the Pandora selection.

I have a partially-done version of the plugin that allows sending arbitrary test commands to the receiver fairly easily - I'll see if I can complete & package that up for you to try as I could send you the proper commands and you could see if they work. Adding a confirmed command to the plugin should not be all that difficult.

Adam