I had to reboot my iMac today and noticed that the RFXCOM failed to initialize. I re-started everything, plugged in and out but still kept getting:
RFXCOM Debug getConfiguration start
RFXCOM initializing communication on port /dev/cu.usbserial-05VLOA3M at speed 38400
RFXCOM Debug serial port opened
RFXCOM Debug send reset cmd: 13 0 0 0 0 0 0 0 0 0 0 0 0 0 (0D 00 00 00 00 00 00 00 00 00 00 00 00 00)
RFXCOM Debug PIC INIT IS: none
RFXCOM Debug send init cmd: 13 0 0 1 2 0 0 0 0 0 0 0 0 0 (0D 00 00 01 02 00 00 00 00 00 00 00 00 00)
RFXCOM Debug rcvd init reply: none
RFXCOM Error initialization failed (retrying in 10 seconds)
I gave up in the end, got a coffee or something and when I looked again some time later saw that initialization had succeeded after around 45 minutes of trying.
Each time a change is made to the settings, even just switching logs on or off, this results in an initialization process that may or not succeed.
Any thoughts on why and how this can be prevented?
I am using the latest version of the plug-in (v1.4.0)and Firmware (v77)
Tim