Aeon Labs MultiSensor (DSB05)
- matt (support)
- Site Admin
- Posts: 21476
- Joined: Mon Jan 27, 2003 1:17 pm
- Location: Texas
- Contact:
Re: Aeon Labs MultiSensor (DSB05)
Hi Martin,
Try excluding it from the Z-Stick, re-including it, then re-syncing it in Indigo.
Try excluding it from the Z-Stick, re-including it, then re-syncing it in Indigo.
-
- Posts: 158
- Joined: Wed Jul 01, 2009 10:53 pm
Re: Aeon Labs MultiSensor (DSB05)
Weirdly, de-powering one of them, and re powering and synchronising has caused it to decide to do temperature again.
I had also noticed some triggers for it had changed from temperature has any change to z wave command received - is this a case of Indigo not quite understanding what the sensor was saying when I had previously synchronised it?
I have yet to do anything to the other problematic sensor. I will try the same, or possibly I will do so with it plugged in via USB.
I had also noticed some triggers for it had changed from temperature has any change to z wave command received - is this a case of Indigo not quite understanding what the sensor was saying when I had previously synchronised it?
I have yet to do anything to the other problematic sensor. I will try the same, or possibly I will do so with it plugged in via USB.
Martin Miller
Auckland - New Zealand
Auckland - New Zealand
Re: Aeon Labs MultiSensor (DSB05)
HI - I just updated the firmware in two DSB05 MultiSensors to 1.18 (Aeon told me that the temperature readings would be accurate with the new firmware).
Now I can't get them to sync. I click the button 3 times to have them wake up (I see the LEDs flash) - but to no avail.
Below is the log form a few attempts. Can anyone tell me where I'm going wrong?
Many thanks in advance!
---
Z-Wave Syncing - started for "Office Sensor"
Z-Wave Syncing - retrieved module neighbors list: 1
Z-Wave Syncing - assigning return route to "003 - Office Sensor"
Z-Wave Error Syncing - failed to assign return route
Z-Wave Error Syncing - failed
Z-Wave Error No response from "003 - Office Sensor". Module might be asleep, or is unreachable.
Z-Wave Syncing - started for "Office Sensor"
Z-Wave Syncing - retrieved module neighbors list: 1
Z-Wave Syncing - assigning return route to "003 - Office Sensor"
Z-Wave Error Syncing - failed to assign return route
Z-Wave Error Syncing - failed
Z-Wave Error No response from "003 - Office Sensor". Module might be asleep, or is unreachable.
Z-Wave Syncing - started for "Office Sensor"
Z-Wave Syncing - retrieved module neighbors list: 1
Z-Wave Syncing - assigning return route to "003 - Office Sensor"
Z-Wave Error Syncing - failed to assign return route
Z-Wave Error Syncing - failed
Z-Wave Error No response from "003 - Office Sensor". Module might be asleep, or is unreachable.
Now I can't get them to sync. I click the button 3 times to have them wake up (I see the LEDs flash) - but to no avail.
Below is the log form a few attempts. Can anyone tell me where I'm going wrong?
Many thanks in advance!
---
Z-Wave Syncing - started for "Office Sensor"
Z-Wave Syncing - retrieved module neighbors list: 1
Z-Wave Syncing - assigning return route to "003 - Office Sensor"
Z-Wave Error Syncing - failed to assign return route
Z-Wave Error Syncing - failed
Z-Wave Error No response from "003 - Office Sensor". Module might be asleep, or is unreachable.
Z-Wave Syncing - started for "Office Sensor"
Z-Wave Syncing - retrieved module neighbors list: 1
Z-Wave Syncing - assigning return route to "003 - Office Sensor"
Z-Wave Error Syncing - failed to assign return route
Z-Wave Error Syncing - failed
Z-Wave Error No response from "003 - Office Sensor". Module might be asleep, or is unreachable.
Z-Wave Syncing - started for "Office Sensor"
Z-Wave Syncing - retrieved module neighbors list: 1
Z-Wave Syncing - assigning return route to "003 - Office Sensor"
Z-Wave Error Syncing - failed to assign return route
Z-Wave Error Syncing - failed
Z-Wave Error No response from "003 - Office Sensor". Module might be asleep, or is unreachable.
- matt (support)
- Site Admin
- Posts: 21476
- Joined: Mon Jan 27, 2003 1:17 pm
- Location: Texas
- Contact:
Re: Aeon Labs MultiSensor (DSB05)
The firmware upgrade probably deleted the inclusion with the Z-Stick. So exclude it, re-include it, then try the re-sync.
Re: Aeon Labs MultiSensor (DSB05)
Can I get more direction? What do you mean by "exclude it, re-include it"?
Please point me to some documentation.
Many thanks....
Please point me to some documentation.
Many thanks....
Re: Aeon Labs MultiSensor (DSB05)
In order for Z-Wave devices to be part of a Z-Wave network, they need to be included in that network (or excluded if they are removed from the network).
There are instructions here :http://wiki.indigodomo.com/doku.php?id=z-wave
Do not delete the Indigo device when you do this. When you're done excluding and re-including, you can point the Indigo device at the new Z-Wave device ID.
There are instructions here :http://wiki.indigodomo.com/doku.php?id=z-wave
Do not delete the Indigo device when you do this. When you're done excluding and re-including, you can point the Indigo device at the new Z-Wave device ID.
I came here to drink milk and kick ass....and I've just finished my milk.
[My Plugins] - [My Forums]
[My Plugins] - [My Forums]
Re: Aeon Labs MultiSensor (DSB05)
Not sure where this post should go, so please feel free to move it.
Just curious if the ZOOZ 800 SERIES Z-WAVE LONG RANGE OUTDOOR MOTION SENSOR ZSE70 800LR is supported. I don’t see it on the list, but other Zooz products are so am more than willing to roll the dice and get one if the thinking is it should work.
Just curious if the ZOOZ 800 SERIES Z-WAVE LONG RANGE OUTDOOR MOTION SENSOR ZSE70 800LR is supported. I don’t see it on the list, but other Zooz products are so am more than willing to roll the dice and get one if the thinking is it should work.
Re: Aeon Labs MultiSensor (DSB05)
It's a brand new product as of this week. I too would be interested in getting it added into Indigojltnol wrote:Not sure where this post should go, so please feel free to move it.
Just curious if the ZOOZ 800 SERIES Z-WAVE LONG RANGE OUTDOOR MOTION SENSOR ZSE70 800LR is supported. I don’t see it on the list, but other Zooz products are so am more than willing to roll the dice and get one if the thinking is it should work.
- matt (support)
- Site Admin
- Posts: 21476
- Joined: Mon Jan 27, 2003 1:17 pm
- Location: Texas
- Contact:
Re: Aeon Labs MultiSensor (DSB05)
The ZSE70 is not currently supported, but if anyone purchases one then copy/paste the Event Log window results of doing a sync here along with a link to the PDF manual and we'll work on getting it added.
Re: Aeon Labs MultiSensor (DSB05)
Found this info on the Zooz site. https://www.support.getzooz.com/kb/arti ... -settings/
Running Indigo 2023.2 on a 24" iMac M1), OS X 15.0
Jeff
Jeff
Re: Aeon Labs MultiSensor (DSB05)
Thanks Matt
I may invest......
I may invest......
- matt (support)
- Site Admin
- Posts: 21476
- Joined: Mon Jan 27, 2003 1:17 pm
- Location: Texas
- Contact:
Re: Aeon Labs MultiSensor (DSB05)
Indigo 2024.1.0 is now available and supports the Zooz Outdoor Motion Sensor (ZSE70).