HomeKit Bridge Servers will not start

ryandenver
Posts: 55
Joined: Tue Jun 18, 2019 8:03 pm

HomeKit Bridge Servers will not start

Post by ryandenver »

Greetings

I just migrated my Intel Mini to an M1 Mini via Time Machine. I'm now finding that HomeKit Bridge will not start its servers with a message about rebuilding folders. I've tried rebuilding them with no luck. I've also tried reinstalling v1.0.2 with no luck.

(Note: the Lutron plug-in didn't work either after migration, but after reinstalling the plug-in, it worked fine. The HomeKit Bridge plug-in is prompting a Mac security warning as it's unsigned, perhaps this is the issue?)

Has anyone else seen and solved this issue?

Thanks,

Ryan
Attachments
Screen Shot 2021-11-17 at 5.26.15 PM.png
Screen Shot 2021-11-17 at 5.26.15 PM.png (300.16 KiB) Viewed 1505 times
cuhouse
Posts: 151
Joined: Wed Feb 21, 2007 4:10 pm
Location: Virginia, USA

Re: HomeKit Bridge Servers will not start

Post by cuhouse »

Ryan,

Is this thread similar to your issue?

viewtopic.php?f=201&t=24923
Indigo 2024.1, Monterey v12.7.6, Dedicated late 2014 Mac Mini, PowerLinc 2413U, Shelly/ShellyNG, Lutron Caséta Smart Bridge PRO (L-BDGPRO2-WH).
ryandenver
Posts: 55
Joined: Tue Jun 18, 2019 8:03 pm

Re: HomeKit Bridge Servers will not start

Post by ryandenver »

It appears similar but not the same. I've run the rebuild of the folders multiple times on each folder with no luck. I've also set the log to Thread Debug. The log is showing a bad CPU type in the executable. I'd have to guess that the plugin isn't compatible with M1 chips?
Attachments
Screen Shot 2021-11-22 at 5.32.18 PM.png
Screen Shot 2021-11-22 at 5.32.18 PM.png (206.91 KiB) Viewed 1405 times
Screen Shot 2021-11-22 at 5.20.00 PM.jpg
Screen Shot 2021-11-22 at 5.20.00 PM.jpg (374.75 KiB) Viewed 1405 times
Post Reply

Return to “HomeKit Bridge”