I have two Insteon devices on one circuit (in one wall box) that respond to commands/queries about 10-15% of the time, yet manually activating the device always gets posted to the log. Any idea what the problem could be?
- Code: Select all
Sep 12, 2020 at 08:59:01
Error "Outside: Front Porch Lights" off; send failed (no acknowledgment)
Error "Outside: Front Porch Lights" off; send failed (no acknowledgment)
Sep 12, 2020 at 08:59:27
Received INSTEON "Outside: Front Porch Lights" off
Sep 12, 2020 at 09:00:07
Error "1st Floor Hall Lights" status request; send failed (no acknowledgment)
Sep 12, 2020 at 09:01:31
Error "1st Floor Hall Lights" status request; send failed (no acknowledgment)
Sep 12, 2020 at 09:03:47
Received INSTEON "1st Floor Hall Lights" off
Received INSTEON "Outside: Front Porch Lights" on
Received INSTEON "Outside: Front Porch Lights" off
Received INSTEON "1st Floor Hall Lights" on
Sep 12, 2020 at 09:04:21
Error "1st Floor Hall Lights" status request; send failed (no acknowledgment)
Sep 12, 2020 at 09:04:37
Error "Outside: Front Porch Lights" status request; send failed (no acknowledgment)