Water Sensed:
Z-Wave received "Leak Sensor Bonus Room" status update is on
Z-Wave Watcher Debug Raw command received (Node 35): 01 0F 00 04 00 23 09 71 05 00 00 00 FF 05 02 00 52
Z-Wave Watcher Debug Raw command received (Node 35): 01 0A 00 04 00 23 04 30 03 FF 06 1C
Device Moved:
Z-Wave received "Leak Sensor Bonus Room" status update is on
Z-Wave Watcher Debug Raw command received (Node 35): 01 0F 00 04 00 23 09 71 05 00 00 00 FF 07 09 00 5B
Z-Wave Watcher Debug Raw command received (Node 35): 01 0A 00 04 00 23 04 30 03 FF 08 12
Here's what I believe to be the decode:
Water Sensed - 71 05 00 00 00 FF 05 02 00
- 0x71 COMMAND_CLASS_NOTIFICATION
0x05 NOTIFICATION_REPORT
0x00 V1 Alarm Type (Not Implemented)
0x00 V1 Alarm Level (Not Implemented)
0x00 Reserved
0xFF Notification Status (Unsolicited report is activated)
0x05 Notification Type (Water Alarm)
0x02 Notification Event / State (Water Leak Detected)
0x00 (0 00 00000)
- 0 Sequence (No “Sequence Number” field is appended after the “Event / State Parameter” field)
00 Reserved
00000 Event / State Parameters Length (0)
Water Sensed - 30 03 FF 06
- 0x30 COMMAND_CLASS_SENSOR_BINARY
0x03 SENSOR_BINARY_REPORT
0XFF Sensor Value (Water Present)
0X06 Sensor Report (Water)
Device Moved - 71 05 00 00 00 FF 07 09 00
- 0x71 COMMAND_CLASS_NOTIFICATION
0x05 NOTIFICATION_REPORT
0x00 V1 Alarm Type (Not Implemented)
0x00 V1 Alarm Level (Not Implemented)
0x00 Reserved
0xFF Notification Status (Unsolicited report is activated)
0x07 Notification Type (Home Security)
0x09 Notification Event / State (Tampering, product moved)
0x00 (0 00 00000)
- 0 Sequence (No “Sequence Number” field is appended after the “Event / State Parameter” field)
00 Reserved
00000 Event / State Parameters Length (0)
Device Moved - 30 03 FF 08
- 0x30 COMMAND_CLASS_SENSOR_BINARY
0x03 SENSOR_BINARY_REPORT
0XFF Sensor Value (Device Tamper)
0X08 Sensor Report (Tamper)
With the tamper function disabled (config parameter 18 with a value of 0), water detection still works as expected and tamper detection is in fact disabled. This is how I have it configured for now, but I would like to turn tamper detection back on at some point.
Thanks,
-Tommy