Does anyone have at the fairly new Zooz ZEN25 (double plug module) that they're currently using under Indigo? I see that the ZEN15 and ZEN20 are supported and wondering if it'll work without having a new device definition. Thanks.
Ralph
matt (support) wrote:Hi Ralph,
I just checked and we do have a device info report submitted by someone that has one. It sounds like only 1 outlet is controllable from Indigo currently, so we'll look at adding a definition to get both outlets working correctly.
matt (support) wrote:Hi Ralph,
I just checked and we do have a device info report submitted by someone that has one. It sounds like only 1 outlet is controllable from Indigo currently, so we'll look at adding a definition to get both outlets working correctly.
Z-Wave Syncing - started for "073 - Relay Power Switch"
Z-Wave Syncing - retrieved module neighbors list: 2, 6, 9, 10, 16, 25, 37, 38, 39, 41, 47, 48, 50, 53, 58, 66, 70
Z-Wave Syncing - assigning return route to "073 - Relay Power Switch"
Z-Wave Syncing - assigned return route
Z-Wave Syncing - retrieved manufacture and model names: Zooz - 027A, Relay Power Switch - A000A003
Z-Wave Syncing - retrieved protocol version 5.03, app version 2.00
Z-Wave Syncing - retrieved class hierarchy: Routing Slave : Relay Switch : Relay Power Switch (04 : 10 : 01, base 25)
Z-Wave Syncing - retrieved command classes: 20v1 60v4 25v1 86v1 27v1 6Cv1 72v1 8Ev1 70v1 71v1 32v4 73v1 55v1 59v1 5Av1 85v1 7Av1 5Ev1 9Fv1
Z-Wave Syncing - retrieved encrypt commands: - none -
Z-Wave Syncing - retrieved capabilities: routing, beaming
Z-Wave Syncing - retrieved multi-endpoint types: 1:(10 : 01), 2:(10 : 01), 3:(10 : 01)
Z-Wave Syncing - retrieved multi-endpoint classes: 1:[5E 85 59 8E 25 32 6C 9F], 2:[5E 85 59 8E 25 32 6C 9F], 3:[5E 85 59 8E 25 32 6C 9F]
Z-Wave Syncing - retrieved group 1 associations: []
Z-Wave Syncing - retrieved group 2 associations: []
Z-Wave Syncing - retrieved group 3 associations: []
Z-Wave Syncing - added group 1 association to interface
Z-Wave Syncing - created device "073 - Relay Switch"
Z-Wave Syncing - created device "073 - Relay Switch 2"
Z-Wave Syncing - created device "073 - Relay Switch 3"
Z-Wave Syncing - complete
Indigo Z-Wave Version: 7.4.0
Node ID: 73
Model: Relay Power Switch
Model ID: A000A003
Manufacturer: Zooz
Manufacturer ID: 027A
Protocol Version: 5.03
Application Version: 2.00
Model Definition Version: 0
Library Type: 3
Class Name: Relay Power Switch
Class Hierarchy: 04 : 10 : 01
Command Class Base: 25
Command Versions: 20v1 60v4 25v1 86v1 27v1 6Cv1 72v1 8Ev1 70v1 71v1 32v4 73v1 55v1 59v1 5Av1 85v1 7Av1 5Ev1 9Fv1
Encryption Status: Not Supported
Multi-Endpoint Types: 1:(10 : 01), 2:(10 : 01), 3:(10 : 01)
Multi-Endpoint Classes: 1:[5E 85 59 8E 25 32 6C 9F], 2:[5E 85 59 8E 25 32 6C 9F], 3:[5E 85 59 8E 25 32 6C 9F]
Multi-Instance Counts: - none -
Features: routing, beaming, energyMeter
Neighbors: 2, 6, 9, 10, 16, 25, 37, 38, 39, 41, 47, 48, 50, 53, 58, 66, 70
Associations: 1:[1] 2:[] 3:[]
Config Values: - none -
roquej wrote:Is there a way to turn off the "energy reporting"?
JP
roquej wrote:It seems the "Periodic power reports" and "Periodic energy reports" parameters don't do anything. Tried setting to 0 (disable) and I get an error. See the picture enclosed.
What am I doing wrong?
Thanks,
JP
aldera wrote:roquej wrote:It seems the "Periodic power reports" and "Periodic energy reports" parameters don't do anything. Tried setting to 0 (disable) and I get an error. See the picture enclosed.
What am I doing wrong?
Thanks,
JP
Looks like the range limits of 30 to 2678400 for each parameter is overriding the ability to enter any number below 30, including the 0. I get the same results.
RS
Users browsing this forum: No registered users and 10 guests