Decent espresso

I thought the community would be interested in this novel espresso machine. It is loaded with sensors and is software controlled with incredible precision. I recently purchased one. Lots of interesting things going on.

The YouTube link is a good place to start…

https://youtu.be/A4BsE0uXxBE

http://decentespresso.com/

Looks nice. I like their sensibilities--an espresso machine that nice which is "decent".

Can it be automated? From the video its looks like it can't?

I wouldn't mine a machine that can make a perfect espresso right when I wake up.

Automation may be coming. Look at the Instagram account… Lots of fun things in the works.

https://instagram.com/decentespressomachines/

That said, since one wants espresso hot might be tough if you were just a minute late getting to the kitchen…

I totally disagree.
Espresso is only really good and satisfying if it’s done with your own hands That’s one of the areas I shall not automate. [HOT BEVERAGE]️

Karl



Sent from my iPhone using Tapatalk

The first thing I do in the morning is fire up my espresso machine. Takes a bit to warm up. Now thinking about it, this might be worth automating. Hmmmmmmm.....

Any suggestions on z-wave 20A GFI outlet? (Yes, mine requires 20A to run and it is close enough to the sink to require GFI)

are you sure about 20amps? That would require a special plug / outlet. Normal plugs only go up to 10/15?

Karl

ps am using a Smart Switch 6 (ZW096), that shows max 15amps switching

are you sure about 20amps? That would require a special plug / outlet. Normal plugs only go up to 10/15?

Quite sure. It is a special 20A outlet and the machine has a 20A plug.

Also, I want the outlet it self to be switchable, I prefer not to have a plug in module. (there is also very little space between the outlet and the machine)

There is this: https://www.amazon.ca/Enerwave-Wireless-Resistant-Receptacle-REQUIRED/dp/B0170EFZ2G but its currently unavailable and not a GFI

Any suggestions on z-wave 20A GFI outlet? (Yes, mine requires 20A to run and it is close enough to the sink to require GFI)

Is it a dedicated outlet? If so, you could swap the breaker for a GFI one. That would make finding a controllable outlet a little easier.

Any suggestions on z-wave 20A GFI outlet? (Yes, mine requires 20A to run and it is close enough to the sink to require GFI)

Is it a dedicated outlet? If so, you could swap the breaker for a GFI one. That would make finding a controllable outlet a little easier.

Yes it is. Good idea, I haven't thought of that.. In the same vein, I guess I could put a z-wave switch in line in the electrical closet. This should make it even easier to find. Any suggestions welcome.