siclark wrote:You could probably improve battery life by not reporting the valve % as frequently, but then the graphing doesnt work so well.
Busta999 wrote:siclark wrote:You could probably improve battery life by not reporting the valve % as frequently, but then the graphing doesnt work so well.
As far as I can tell I only have valve% reporting when a change of 10% or greater occurs.
As the TRV Controller appears to only fully open, 100% or close, 0% then the valve% reporting should only occur when the TRV is actually working.
.
Busta999 wrote:A question for Autolog....
I am trying to setup a Control Page that indicates which TRV is requesting Heat.
i.e. when the TRV demands heat it, on my setup, changes the Variable HeatingDemand to true.
All well and good but I would like to display which specific TRV is requesting that.
In the Device the fire icon illuminates when Demand is required in the Device Details (but not in the main display)
Which Custom State is that or what attribute is that so I can trap it?
[edit] is it possibly HVACOperationsModeTRV - 1 being Demand True, 0 being Demand False?
Z-Wave queued "Thermostat - Molly" change heat setpoint to 16.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 16.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 15.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 16.0° for next awake notification
TRV Error Potential race condition detected for TRV Controller 'TRV - Radiator - Molly' in TRV Plugin [deviceUpdated] - TRV Controller device being disabled!
TRV Error Potential race condition detected for TRV Controller 'TRV - Radiator - Molly' in TRV Plugin [deviceUpdated] - TRV Controller device being disabled!
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 15.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 15.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 16.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 15.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 16.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Ignored device "TRV - Radiator - Molly" action request (communication is disabled)
Z-Wave queued "Thermostat - Molly" change heat setpoint to 15.0° for next awake notification
TRV Stopping 'TRV - Radiator - Molly'
Ignored device "TRV - Radiator - Molly" action request (communication is disabled)
Ignored device "TRV - Radiator - Molly" action request (communication is disabled)
Ignored device "TRV - Radiator - Molly" action request (communication is disabled)
Ignored device "TRV - Radiator - Molly" action request (communication is disabled)
Ignored device "TRV - Radiator - Molly" action request (communication is disabled)
Ignored device "TRV - Radiator - Molly" action request (communication is disabled)
Ignored device "TRV - Radiator - Molly" action request (communication is disabled)
Ignored device "TRV - Radiator - Molly" action request (communication is disabled)
Ignored device "TRV - Radiator - Molly" action request (communication is disabled)
Ignored device "TRV - Radiator - Molly" action request (communication is disabled)
Ignored device "TRV - Radiator - Molly" action request (communication is disabled)
Ignored device "TRV - Radiator - Molly" action request (communication is disabled)
Ignored device "TRV - Radiator - Molly" action request (communication is disabled)
Ignored device "TRV - Radiator - Molly" action request (communication is disabled)
Schedule Current Meter Reading
Ignored device "TRV - Radiator - Molly" action request (communication is disabled)
Ignored device "TRV - Radiator - Molly" action request (communication is disabled)
Ignored device "TRV - Radiator - Molly" action request (communication is disabled)
Ignored device "TRV - Radiator - Molly" action request (communication is disabled)
Ignored device "TRV - Radiator - Molly" action request (communication is disabled)
Hue Lights received "Motion - Study (Hue)" status update is on
Ignored device "TRV - Radiator - Molly" action request (communication is disabled)
Ignored device "TRV - Radiator - Molly" action request (communication is disabled)
Ignored device "TRV - Radiator - Molly" action request (communication is disabled)
Ignored device "TRV - Radiator - Molly" action request (communication is disabled)
Ignored device "TRV - Radiator - Molly" action request (communication is disabled)
Ignored device "TRV - Radiator - Molly" action request (communication is disabled)
Z-Wave received "Thermostat - Hot Water" sensor update to 36.4 °C
Trigger Hot Water - Hit Temp High
Trigger Hot Water in Range Variable Indicator
Trigger Hot Water Hits 36C - Set Heating Available On
Z-Wave received "Thermostat - Hot Water" sensor update to 36.4 °C
Z-Wave sent "Hot Water" off
TRV 'TRV - Radiator - Kitchen' Heat Setpoint set to specified 'Device Start' value i.e. '18.0'
TRV Started 'TRV - Radiator - Kitchen': Controlling TRV 'Radiator - Kitchen'; Remote thermostat 'Thermostat - Kitchen'; No Device Heat Source control required.; Variable Heat Source 'HeatingDemand'
TRV 'TRV - Radiator - Molly' Heat Setpoint set to specified 'Device Start' value i.e. '17.0'
TRV Started 'TRV - Radiator - Molly': Controlling TRV 'Radiator - Molly'; Remote thermostat 'Thermostat - Molly'; No Device Heat Source control required.; Variable Heat Source 'HeatingDemand'
Z-Wave sent "Radiator - Kitchen - Valve" status request
Z-Wave received "Temp: Garage (ZW)" sensor update to 17.4 °C
Z-Wave queued "Thermostat - Kitchen" change heat setpoint to 18.0° for next awake notification
Z-Wave sent "Radiator - Kitchen" change heat setpoint to 8.0°
Z-Wave queued "Thermostat - Kitchen" change heat setpoint to 18.0° for next awake notification
Z-Wave sent "Radiator - Kitchen" change heat setpoint to 8.0°
Z-Wave sent "Radiator - Kitchen" raw command [40 01 1F]
Z-Wave sent "Radiator - Molly - Valve" status request
Z-Wave received "Garage - Humidity" sensor update to 80%
Z-Wave received "Radiator - Molly - Valve" status update is off
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave sent "Radiator - Kitchen - Valve" raw command [26 01 00]
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave received "Garage - Luminance" sensor update to 3 lux
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave received "Garage - Ultraviolet" sensor update to 0
Z-Wave received "Thermostat - Bath" temperature update to 21.7 °C
Z-Wave received "Thermostat - Bath" temperature update to 21.7 °C
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Hue Lights received "Motion - Study (Hue)" status update is off
Z-Wave sent "Radiator - Kitchen - Valve" raw command [26 01 00]
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
TRV Error Re-Enabling TRV Controller 'TRV - Radiator - Kitchen' following potential race condition detection (which as a result the device was disabled).
TRV Error Re-Enabling TRV Controller 'TRV - Radiator - Kitchen' following potential race condition detection (which as a result the device was disabled).
TRV Error Re-Enabling TRV Controller 'TRV - Radiator - Kitchen' following potential race condition detection (which as a result the device was disabled).
TRV Error Re-Enabling TRV Controller 'TRV - Radiator - Kitchen' following potential race condition detection (which as a result the device was disabled).
TRV Error Re-Enabling TRV Controller 'TRV - Radiator - Kitchen' following potential race condition detection (which as a result the device was disabled).
TRV Error Re-Enabling TRV Controller 'TRV - Radiator - Kitchen' following potential race condition detection (which as a result the device was disabled).
TRV Error Re-Enabling TRV Controller 'TRV - Radiator - Kitchen' following potential race condition detection (which as a result the device was disabled).
TRV Error Re-Enabling TRV Controller 'TRV - Radiator - Kitchen' following potential race condition detection (which as a result the device was disabled).
TRV Error Re-Enabling TRV Controller 'TRV - Radiator - Kitchen' following potential race condition detection (which as a result the device was disabled).
TRV Error Re-Enabling TRV Controller 'TRV - Radiator - Kitchen' following potential race condition detection (which as a result the device was disabled).
TRV Error Re-Enabling TRV Controller 'TRV - Radiator - Kitchen' following potential race condition detection (which as a result the device was disabled).
TRV Error Re-Enabling TRV Controller 'TRV - Radiator - Kitchen' following potential race condition detection (which as a result the device was disabled).
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave sent "Radiator - Kitchen - Valve" raw command [26 02]
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave received "Radiator - Kitchen - Valve" status update is off
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave sent "Radiator - Kitchen - Valve" raw command [26 02]
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave sent "Radiator - Kitchen" raw command [40 01 00]
Z-Wave sent "Radiator - Kitchen" mode change to off
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Matplotlib [Heat-Water-Motion CSV Engine] CSV data updated successfully.
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Matplotlib [Chart - Radiator - Lounge Front] Chart updated successfully.
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Matplotlib [Chart - Radiator - Master Bed] Chart updated successfully.
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Matplotlib [Chart - Radiator - Molly] Chart updated successfully.
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave received "Thermostat - Hot Water" sensor update to 36.5 °C
Trigger Hot Water - Hit Temp High
Trigger Hot Water in Range Variable Indicator
Trigger Hot Water Hits 36C - Set Heating Available On
Z-Wave received "Thermostat - Hot Water" sensor update to 36.5 °C
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave sent "Hot Water" off
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave received "Kitchen Freezer Door Temp Sensor" sensor update to 23.68 °C
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave received "113 - Siren" status update battery level 12%
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 19.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 19.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 20.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 19.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 19.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 19.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
TRV Error Re-Enabling TRV Controller 'TRV - Radiator - Molly' following potential race condition detection (which as a result the device was disabled).
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 19.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 20.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 19.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 19.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Schedule Current Meter Reading
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 19.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 19.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 19.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 19.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 20.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 19.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 20.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 19.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 19.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 19.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 19.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 19.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 19.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 19.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave received "Thermostat - Hot Water" sensor update to 36.6 °C
Trigger Hot Water - Hit Temp High
Trigger Hot Water in Range Variable Indicator
Trigger Hot Water Hits 36C - Set Heating Available On
Z-Wave received "Thermostat - Hot Water" sensor update to 36.6 °C
Z-Wave sent "Hot Water" off
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 19.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Trigger Freezer Temp Ok - Just right
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 20.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 19.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 20.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 19.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 20.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 19.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 19.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 19.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 19.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
TRV Error Potential race condition detected for TRV Controller 'TRV - Radiator - Molly' in TRV Plugin [deviceUpdated] - TRV Controller device being disabled!
TRV Error Potential race condition detected for TRV Controller 'TRV - Radiator - Molly' in TRV Plugin [deviceUpdated] - TRV Controller device being disabled!
TRV Error Potential race condition detected for TRV Controller 'TRV - Radiator - Molly' in TRV Plugin [deviceUpdated] - TRV Controller device being disabled!
TRV Error Potential race condition detected for TRV Controller 'TRV - Radiator - Molly' in TRV Plugin [deviceUpdated] - TRV Controller device being disabled!
TRV Error Potential race condition detected for TRV Controller 'TRV - Radiator - Molly' in TRV Plugin [deviceUpdated] - TRV Controller device being disabled!
TRV Error Potential race condition detected for TRV Controller 'TRV - Radiator - Molly' in TRV Plugin [deviceUpdated] - TRV Controller device being disabled!
TRV Error Potential race condition detected for TRV Controller 'TRV - Radiator - Molly' in TRV Plugin [deviceUpdated] - TRV Controller device being disabled!
TRV Error Potential race condition detected for TRV Controller 'TRV - Radiator - Molly' in TRV Plugin [deviceUpdated] - TRV Controller device being disabled!
TRV Error Potential race condition detected for TRV Controller 'TRV - Radiator - Molly' in TRV Plugin [deviceUpdated] - TRV Controller device being disabled!
TRV Error Potential race condition detected for TRV Controller 'TRV - Radiator - Molly' in TRV Plugin [deviceUpdated] - TRV Controller device being disabled!
TRV Error Potential race condition detected for TRV Controller 'TRV - Radiator - Molly' in TRV Plugin [deviceUpdated] - TRV Controller device being disabled!
TRV Error Potential race condition detected for TRV Controller 'TRV - Radiator - Molly' in TRV Plugin [deviceUpdated] - TRV Controller device being disabled!
TRV Error Potential race condition detected for TRV Controller 'TRV - Radiator - Molly' in TRV Plugin [deviceUpdated] - TRV Controller device being disabled!
TRV Error Potential race condition detected for TRV Controller 'TRV - Radiator - Molly' in TRV Plugin [deviceUpdated] - TRV Controller device being disabled!
TRV Error Potential race condition detected for TRV Controller 'TRV - Radiator - Molly' in TRV Plugin [deviceUpdated] - TRV Controller device being disabled!
Hue Lights received "Luminance - Landing 2 (Hue)" sensor update to 59.5 lux
TRV Error Potential race condition detected for TRV Controller 'TRV - Radiator - Molly' in TRV Plugin [deviceUpdated] - TRV Controller device being disabled!
TRV Error Potential race condition detected for TRV Controller 'TRV - Radiator - Molly' in TRV Plugin [deviceUpdated] - TRV Controller device being disabled!
TRV Error Potential race condition detected for TRV Controller 'TRV - Radiator - Molly' in TRV Plugin [deviceUpdated] - TRV Controller device being disabled!
TRV Error Potential race condition detected for TRV Controller 'TRV - Radiator - Molly' in TRV Plugin [deviceUpdated] - TRV Controller device being disabled!
Ignored device "TRV - Radiator - Molly" action request (communication is disabled)
TRV Error Potential race condition detected for TRV Controller 'TRV - Radiator - Molly' in TRV Plugin [deviceUpdated] - TRV Controller device being disabled!
TRV Error Potential race condition detected for TRV Controller 'TRV - Radiator - Molly' in TRV Plugin [deviceUpdated] - TRV Controller device being disabled!
TRV Error Potential race condition detected for TRV Controller 'TRV - Radiator - Molly' in TRV Plugin [deviceUpdated] - TRV Controller device being disabled!
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Ignored device "TRV - Radiator - Molly" action request (communication is disabled)
Z-Wave queued "Thermostat - Molly" change heat setpoint to 19.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 20.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 21.0° for next awake notification
Hue Lights received "Luminance - Utility (Hue)" sensor update to 173 lux
TRV Stopping 'TRV - Radiator - Molly'
Z-Wave sent "Radiator - Molly" change heat setpoint to 26.0°
Z-Wave sent "Radiator - Molly" change heat setpoint to 26.0°
Z-Wave queued "Thermostat - Molly" change heat setpoint to 19.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 19.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 19.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 19.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 17.0° for next awake notification
Z-Wave queued "Thermostat - Molly" change heat setpoint to 18.0° for next awake notification
Z-Wave sent "Radiator - Molly" raw command [40 01 1F]
Z-Wave s
[edit] is it possibly HVACOperationsModeTRV - 1 being Demand True, 0 being Demand False?
Try Heater Equipment State (on or off) - it is a predefined Indigo Thermostat State (about 14 down from the top of the state list) when you select the TRV Thermostat Device (the plugin device not the Spirit) as a device state in the Control Panel.
Busta999 wrote:Autolog,[edit] is it possibly HVACOperationsModeTRV - 1 being Demand True, 0 being Demand False?
Try Heater Equipment State (on or off) - it is a predefined Indigo Thermostat State (about 14 down from the top of the state list) when you select the TRV Thermostat Device (the plugin device not the Spirit) as a device state in the Control Panel.
I am missing something here.. I cannot find Heater Equipment State in the state list - is possibly because my TRV devices call for heat through a variable change rather than directly control a device?
What am I missing ? ...
Busta999 wrote:I noticed today, while performing the annual bleed radiators, changing a TRV SetPoint in Devices behaved oddly. ...
autolog wrote:Busta999 wrote:I noticed today, while performing the annual bleed radiators, changing a TRV SetPoint in Devices behaved oddly. ...
The plugin could handle this better = euphemism for this is probably a bug.
However, I think what is happening is that you are changing the SetPoint (by clicking the up arrow) and the plugin can see that the mode is OFF i.e. not Heat, so is resetting it to 17.
As the commands are processed via a queue on a background thread, the constant clicking is just overloading the plugin which is trying to set the temperature back to 17 having first actioned your request to increase it. As I say, it could be smarter.
If the plugin detects what it considers to be too many commands then it will flag this up as a race condition (aka out of control) and temporarily disable the TRV Controller device to let everything settle down and then re-enable it again.
Users browsing this forum: No registered users and 2 guests