- uniFiAP runConcurrentThread stopping plugin due to: ::::: new devices :::::
Reloading plugin "uniFiAP 7.26.163"
Stopping plugin "uniFiAP 7.26.163" (pid 96079)
uniFiAP Error plugin runConcurrentThread function returned or failed (will attempt again in 10 seconds)
Stopped plugin "uniFiAP 7.26.163"
Starting plugin "uniFiAP 7.26.163" (pid 96552)
uniFiAP initializing ...
uniFiAP path To files: =================
uniFiAP indigo /Library/Application Support/Perceptive Automation/
uniFiAP installFolder /Library/Application Support/Perceptive Automation/Indigo 7.3/
uniFiAP plugin.py /Library/Application Support/Perceptive Automation/Indigo 7.3/Plugins/uniFiAP.indigoPlugin/Contents/Server Plugin/
uniFiAP Plugin params /Library/Application Support/Perceptive Automation/Indigo 7.3/Preferences/Plugins/com.karlwachs.uniFiAP/
uniFiAP Error logger enabled for ERROR ==> TEST ONLY
uniFiAP Critical Error logger enabled for CRITICAL ==> TEST ONLY
uniFiAP check /Library/Application Support/Perceptive Automation/Indigo 7.3/Logs/com.karlwachs.uniFiAP/plugin.log <<<< for detailed logging
uniFiAP Plugin short Name UniFi
uniFiAP my PID 96552
uniFiAP set params 4 indigo V 7.3
Started plugin "uniFiAP 7.26.163"
uniFiAP testing if variable enableTimeTracking_UniFi is == on/off/print-option to enable/end/print time tracking of all functions and methods (option:'',calls,cumtime,pcalls,time)
uniFiAP myLogSet setting parameters -- logFileActive= indigo; logFile= /Library/Application Support/Perceptive Automation/Indigo 7.3/Logs/com.karlwachs.uniFiAP/plugin.log; debugLevel= ['Logic', 'Log', 'LogDetails']
uniFiAP start runConcurrentThread, initializing loop settings and threads ..
utilities versionCheck for com.karlwachs.utilities installed: 1.18.25
utilities the version of the plugin is up to date; version on server:1.18.25
Z-Wave received "Living room - PIR" status update is off
uniFiAP initialized ... looping
I have added a new USG and a new switch and started the process of setting up the VLAN's, but at the moment have only defined them and not activated any. As far as I can tell I have added the IP's of the devices correctly in the configuration. Any ideas what I may have done?
Thanks...
Oh in case it makes a difference I have firmware 4.0.30.10217 on the switch. Thinking about it, this may have started around this time. I put that firmware on it as I was getting a lot of WPA Authentication Timeout/Failures, and this firmware has a fix for it.