howartp wrote:I meant, can you do it then see if Motion reports start arriving into Indigo...
You'll have to forgive me; I'm quite literal.
I don't do associations, so I don't necessarily know what I'm doing. I added associations within Indigo and re-synced the switch to ensure that the associations for groups 2 & 3 were uploaded to the switch.
- Code: Select all
Z-Wave Syncing - started for "048 - Mulitlevel Switch"
Z-Wave Syncing - retrieved module neighbors list: 3, 4, 5, 8, 10, 11, 12, 15, 16, 21, 24, 27, 28, 30, 43, 46
Z-Wave Syncing - assigning return route to "048 - Mulitlevel Switch"
Z-Wave Syncing - assigned return route
Z-Wave Syncing - retrieved manufacture and model names: General Electric - 0063, Dimmable Power Switch - 494D3034
Z-Wave Syncing - retrieved protocol version 4.34, app version 5.32
Z-Wave Syncing - retrieved class hierarchy: Routing Slave : Mulitlevel Switch : Dimmable Power Switch (04 : 11 : 01, base 26)
Z-Wave Syncing - retrieved command classes: 20v1 60v4 26v2 86v1 27v1 2Bv1 2Cv1 8Ev1 70v1 71v1 72v1 73v1 56v1 59v1 5Av1 7Av1 5Ev1 85v1
Z-Wave Syncing - retrieved encrypt commands: - none -
Z-Wave Syncing - retrieved capabilities: routing, beaming
Z-Wave Syncing - retrieved multi-endpoint types: 1:(11 : 01), 2:(07 : 01)
Z-Wave Syncing - retrieved multi-endpoint classes: 1:[5E 59 26], 2:[5E 59 71]
Z-Wave Syncing - retrieved group 1 associations: [1]
Z-Wave Syncing - retrieved group 2 associations: [1]
Z-Wave Syncing - retrieved group 3 associations: [1]
Z-Wave Syncing - group 1 association to interface already exists (skipping)
Z-Wave Syncing - complete
There is no log message (and apparently no debug message) sent to Indigo on motion. In looking at the technical documents (located at https://www.ezzwave.com/sites/jasco/uploads/documents/PDFs/part2/26933_Product_Page.pdf, I don't see a parm for motion notification, but I'm not familiar with the Z-Wave command classes to know if there's something there.