I got this directly from the insteon forum,
This motion is outdoors as it is supposed to be indoor outdoor. The temp was above 32 when this happened.
Their reply [b]So it must be at the 50 degree threshold then. I’ll let the Insteon team know next time I talk to them.[/b]
When you say send an alert and then stop, do you mean the motion will stop working or the temp sensor will send a report and stop sending that button 19?
Their reply Temp sensor is separate from the motion sensor. It was supposed to send the alert once and stop.
Do you know when there will there be a solution?
Their reply I don’t expect one anytime soon. Since it is not a supported feature set… i.e. not in software, documentation, or marketing… it would not make sense for them to pull engineers off current projects to revisit this. We will have to wait to see what their plans are moving forward.
Sent by the Insteon Forum
They then sent the following in an email to me:
Insteon command to disable to alert: 2E0001077B848092C080D0100000008C
Full serial command to disable to alert: 0262IDIDID1F2E0001077B848092C080D0100000008C
IDIDID = Motion sensor Insteon device Id.
For full disclosure this is not something I usually mess around with but you may be able to send the serial command through indigo to have those alerts stop. I hope it all works out.
Best of luck!!!!
Please help me.
Thanks
Rich Fantus