Hmm actually the problem seems to be a bit more widespread than i originally thought. As soon as i try to do any input via the virtual keypad i start getting errors such as:
- Code: Select all
DSC Alarm Debug TX: 07110F9
DSC Alarm Debug RX: 50196
DSC Alarm Error IT-100/Envisalink Error: Received a command with a bad checksum
DSC Alarm Debug RX: 550203608141699
DSC Alarm Debug Alarm panel time is within 1 minute of actual time, no update necessary.
DSC Alarm Debug RX: 90100032 Date Time AUG 14/16 8:37p20
DSC Alarm Debug LCD Update, Line 1:' Date Time ' Line 2:'AUG 14/16 8:37p'
DSC Alarm Debug Updating state LCDLine1 for keypad on partition 0 to Date Time .
DSC Alarm Debug Updating state LCDLine2 for keypad on partition 0 to AUG 14/16 8:37p.
DSC Alarm Error Timed out after waiting for response to command 07110 for 3 seconds, retrying.
DSC Alarm Debug TX: 07110F9
DSC Alarm Debug RX: 50196
DSC Alarm Error IT-100/Envisalink Error: Received a command with a bad checksum
DSC Alarm Error Timed out after waiting for response to command 07110 for 3 seconds, retrying.
DSC Alarm Debug TX: 07110F9
DSC Alarm Debug RX: 50196
DSC Alarm Error IT-100/Envisalink Error: Received a command with a bad checksum
Which will then repeat itself for a few seconds before eventually returning to normal (at which point comms with the alarm returns to normal so things like zones opening results in the appropriate triggers occurring)
I've tried the following:
Deleting the control panel devices
New action groups to send the commands
Restarted the DSC alarm panel
Restoring back to previous version fixes errors
Disarming the alarm from a physical control panel has these errors:
- Code: Select all
DSC Alarm Debug RX: 90320FE
DSC Alarm Debug LED 'Armed' is 'off'.
DSC Alarm Debug Updating state LEDArmed for keypad on partition 1 to off.
DSC Alarm Debug RX: 90100032System Disarmed No Alarm Memory 00
DSC Alarm Debug LCD Update, Line 1:'System Disarmed ' Line 2:'No Alarm Memory '
DSC Alarm Debug Updating state LCDLine1 for keypad on partition 0 to System Disarmed .
DSC Alarm Debug Updating state LCDLine2 for keypad on partition 0 to No Alarm Memory .
DSC Alarm Debug RX: 50196
DSC Alarm Error IT-100/Envisalink Error: Received a command with a bad checksum
DSC Alarm Debug RX: 90100032Secure or Arm System <>96
DSC Alarm Debug LCD Update, Line 1:'Secure or ' Line 2:' Arm System '
DSC Alarm Debug Updating state LCDLine1 for keypad on partition 0 to Secure or .
DSC Alarm Debug Updating state LCDLine2 for keypad on partition 0 to Arm System .
DSC Alarm Debug RX: 6531CF
DSC Alarm Error Timed out after waiting for response to command 0711*1# for 3 seconds, retrying.
DSC Alarm Debug TX: 0711*1#47
DSC Alarm Debug RX: 50196
DSC Alarm Error IT-100/Envisalink Error: Received a command with a bad checksum
DSC Alarm Debug RX: 60903739
DSC Alarm Debug Zone number 37 Open.
DSC Alarm Error Timed out after waiting for response to command 0711*1# for 3 seconds, retrying.
DSC Alarm Debug TX: 0711*1#47
DSC Alarm Debug RX: 50196
DSC Alarm Error IT-100/Envisalink Error: Received a command with a bad checksum
DSC Alarm Debug RX: 6100252E
DSC Alarm Debug Zone number 25 Closed.
DSC Alarm Debug RX: 90100032 Date Time AUG 14/16 8:40p1A
DSC Alarm Debug LCD Update, Line 1:' Date Time ' Line 2:'AUG 14/16 8:40p'
DSC Alarm Debug Updating state LCDLine1 for keypad on partition 0 to Date Time .
DSC Alarm Debug Updating state LCDLine2 for keypad on partition 0 to AUG 14/16 8:40p.
DSC Alarm Debug RX: 61003731
DSC Alarm Debug Zone number 37 Closed.
For reference i'm using a PC5020 control panel with an IT100 connected to a PCI serial card in a Mac Pro