- Posted on
Sun Nov 02, 2008 6:30 am
-
anode
offline
-
- Posts: 697
- Joined: May 27, 2007
- Location: NC
Update:
Finally got home and got the mini to reboot. All is cool and working just peachy.
As far as the TiVo goes, its all real simple.
Telnet in (via a start up trigger)
tell application "Terminal"
do script "telnet 192.168.1.19 31339"
end tell
then a mini script for each button
ie:
tell application "Terminal"
--do script "telnet 192.168.1.19 31339"
--do script "IRCODE UP" in front window
--do script "IRCODE DOWN" in front window
--do script "IRCODE LEFT" in front window
--do script "IRCODE RIGHT" in front window
--do script "IRCODE SELECT" in front window
--do script "IRCODE TIVO" in front window
--do script "IRCODE LIVETV" in front window
--do script "IRCODE THUMBSUP" in front window
--do script "IRCODE THUMBSDOWN" in front window
--do script "IRCODE CHANNELUP" in front window
--do script "IRCODE CHANNELDOWN" in front window
--do script "IRCODE RECORD" in front window
--do script "IRCODE DISPLAY" in front window
--do script "IRCODE DIRECTV" in front window
--do script "IRCODE NUM0" in front window
--do script "IRCODE NUM1" in front window
--do script "IRCODE NUM2" in front window
--do script "IRCODE NUM3" in front window
--do script "IRCODE NUM4" in front window
--do script "IRCODE NUM5" in front window
--do script "IRCODE NUM6" in front window
--do script "IRCODE NUM7" in front window
--do script "IRCODE NUM8" in front window
--do script "IRCODE NUM9" in front window
--do script "IRCODE ENTER" in front window
--do script "IRCODE CLEAR" in front window
--do script "IRCODE PLAY" in front window
--do script "IRCODE PAUSE" in front window
--do script "IRCODE SLOW" in front window
--do script "IRCODE FORWARD" in front window
--do script "IRCODE REVERSE" in front window
--do script "IRCODE STANDBY" in front window
do script "IRCODE NOWSHOWING" in front window
--do script "IRCODE REPLAY" in front window
--do script "IRCODE ADVANCE" in front window
--do script "IRCODE DELIMITER" in front window
--do script "IRCODE GUIDE" in front window
--do script "SETCH 360" in front window
--do script "IRCODE PAUSE" in front window
--do script "IRCODEDISPLAY" in front window
end tell
(note, all commands are in here, but only one isn't commented out; NOWSHOWING)
One of the nice things is that I have about 10 main channels set up on a control page, so I can just click and jump to them. I also have them set, channel number and call letters, as variables, so I can change the variables without editing the control page.