Page 1 of 1
Missing Devices in "match device state" action
Posted:
Wed Jul 22, 2020 4:37 pm
by jheddings
Hello...
I have several "3-way" switches set up in Indigo. These are just SwitchLinc's with no load that are set as a controller/responder to the real switch. I also have some custom triggers in Insteon just to keep things in sync when other things control the lights. That has all been working very well, until...
I finally got around to replacing the switches in my basement this weekend. When I try to set up the "match device" action, the new switches are not showing in the device drop down. They are the switch types and FW versions as other devices in my network. It may be a different HW version (slightly different looks), but everything else is working fine.
The other strange thing is that the devices show up in the "match device" setting popup, just not in the source device menu. Some screen shots below for reference.
Re: Missing Devices in "match device state" action
Posted:
Wed Jul 22, 2020 5:17 pm
by matt (support)
Can you re-sync one of the Insteon devices that isn't showing, then copy/paste the Event Log results into a reply for us?
Re: Missing Devices in "match device state" action
Posted:
Wed Jul 22, 2020 5:28 pm
by jheddings
You bet... Here is the re-sync output:
- 50.D7.BA = secondary "3-way" switch
- 3D.98.1F = Insteon PLC controller
- Code: Select all
PowerLinc Linking - entered discovery linking mode (240 seconds)
PowerLinc Linking - sending engine version request to 50.E2.E8
PowerLinc Linking - received engine version 02 from 50.E2.E8
PowerLinc Linking - sending id request for device information to 50.E2.E8
PowerLinc Linking - received id request response from 50.E2.E8
PowerLinc Linking - initializing remote device "Basement Stairway Lights" (address 50.E2.E8, firmware version 45)
PowerLinc Linking - initialize complete
PowerLinc Linking - syncing remote device "Basement Stairway Lights" (address 50.E2.E8, firmware version 45)
PowerLinc Linking - syncing all links
PowerLinc Linking - . . . read: INSTEON dev link to controller 3D.98.1F, flags AA, group FE, data FF 1C 01
PowerLinc Linking - . . . read: INSTEON dev link to responder 3D.98.1F, flags E2, group 01, data 03 1F 00
PowerLinc Linking - . . . read: INSTEON dev link to controller 50.D7.BA, flags A2, group 01, data FF 1F 01
PowerLinc Linking - . . . read: INSTEON dev link to responder 50.D7.BA, flags E2, group 01, data 03 1F 00
PowerLinc Linking - . . found: PowerLinc responder for group 1
PowerLinc Linking - comparing local and remote links
PowerLinc Linking - . . match: remote link is identical to persistent link 50.D7.BA, flags A2, group 01
PowerLinc Linking - . . match: remote link is identical to persistent link 50.D7.BA, flags E2, group 01
PowerLinc Linking - compare complete
PowerLinc Linking - sync complete
PowerLinc Linking - device "Basement Stairway Lights" links updated
PowerLinc Linking - syncing PowerLinc links (address 3D.98.1F)
PowerLinc Linking - . . adding: INSTEON plc link to controller 50.E2.E8, flags 03, group 01, data 00 00 FF
PowerLinc Linking - . . adding: (not added -- probably already exists)
PowerLinc Linking - PowerLinc links updated
PowerLinc Linking - sync complete
PowerLinc Linking - exited linking mode
Re: Missing Devices in "match device state" action
Posted:
Mon Jul 27, 2020 5:29 pm
by matt (support)
Sorry, the log of the Sync didn't tell me what I was looking for. Open the device dialog then tell me what it shows the Model of the device is (second label item from the top).
Re: Missing Devices in "match device state" action
Posted:
Thu Jul 30, 2020 5:27 pm
by jheddings
Sorry for the delay... My laptop took a dive earlier this week. Screenshot attached.
Re: Missing Devices in "match device state" action
Posted:
Sat Aug 01, 2020 4:30 pm
by matt (support)
Thanks for the details. I've looked into this in more detail and it appears to be a UI bug that prevents that popup menu from being correctly populated. We'll definitely get this fixed in the next release.
Re: Missing Devices in "match device state" action
Posted:
Sun Aug 02, 2020 10:14 pm
by jheddings
Thanks, Matt! Let me know if you need any more details or help trying out patches.
Re: Missing Devices in "match device state" action
Posted:
Wed Dec 23, 2020 4:43 pm
by matt (support)
Indigo 7.5 is now available and should now correctly show the devices in the popup for this action.
Re: Missing Devices in "match device state" action
Posted:
Tue Apr 06, 2021 8:37 pm
by jheddings
It is working great! Thanks!!