Please help. I’m unable to get a trigger that’s activated by a motion detector linked to an Insteon #2450 I/O Linc to trigger when the I/O Linc fires.. The Optex motion detector and the Insteon I/O Linc reliably work and the I/O Linc produces an Insteon signal which is always recorded by Indigo. However, a trigger that is supposed to activate when the I/O Linc turns on (or off) does not work if the process is initiated by the Optex motion detector. If I trigger the I/O Linc within Indigo, then the trigger activates perfectly.
Here’s the Indigo log showing at first two Optex motion detector-initiated events at 10:40 and 11:04 AM followed by me triggering the I/O Linc manually through Indigo:
Jun 6, 2022 at 10:40:28 AM
Received INSTEON "Driveway Alarm@CRR" off
Received INSTEON "Driveway Alarm@CRR" on
Jun 6, 2022 at 11:04:56 AM
Received INSTEON "Driveway Alarm@CRR" off
Received INSTEON "Driveway Alarm@CRR" on
Jun 6, 2022 at 11:11:04 AM
Sent INSTEON "Driveway Alarm@CRR" on
Trigger DrivewayMotion @ CRR Has Occurred
Action Group SendEmail-Main Driveway Motion
Email+ sending email 'Main Driveway Sensor Turned ON' to ‘***x***.com’ using Email+ SMTP Server
Sent INSTEON "Siren" on
Sent INSTEON "Optex Receiver" off
Sent INSTEON "Driveway Alarm@CRR" off
Trigger SirenTimer->OFF
Sent INSTEON "Siren" off
I’ve tried resetting the server and rebooting Indigo without change. The trigger type is : Device State Changed - Binary Output 1 Becomes On. Condition is Always.
Please help. What am I doing wrong here?
Thanks.