Hi All,
I'm trying to accomplish some new stuf with this.
So the things I've got:
- Fibaro Motion Sensor
- Fibaro Dimmer
The things I want to accomplish.
When there's motion and someone is home (already got some variables) and the Luminance is below 40, turn on the light to 100%.
After around 2 minutes, start dimming the light to 0%.
But, when in every stage, there's motion again, start over with the 2 minutes countdown.
A problem that I'm countering here is that when there's motion again, the lux is above 40 (because the lights are on), so the lights just will go out.
Also a thing, whenever I turn on the light manually, it should stay on forever.
What I've got now is the following:
- Trigger "MotionEntry" for motion becomes on --> if someone home & luminance is below 40 --> set brightness to 100% & turn on & top timer "entrylighttimer" & start timer "entrylighttimer" with a delay of 2 minutes
- Trigger "DimLightEntryBy10%" for timer expired "EntryLightTimer" --> Dim entry light by 10%
- Trigger "RestartTimerLightEntry" for timer expired "EntryLightTimer" --> Restart Timer "EntryLightTimer"
The thing I also got is that It'll dim to 90% and then just stops dimming..
Many thanks to think this through with me!
Regards