Event Log - Device Output

Posted on
Mon Nov 02, 2020 6:27 pm
Sharek326 offline
User avatar
Posts: 377
Joined: Jul 20, 2014
Location: Lansford, PA

Event Log - Device Output

I noticed today that many of my devices have been putting multiple outputs of the same data. I removed the devices and included them again with the same result ....Here are a few examples

Has anyone else seen this or know why it is happening?


Nov 2, 2020 at 7:19:22 PM
Z-Wave received "014 - Laundry Door" status update battery level 100%
Z-Wave received "014 - Laundry Door" status update battery level 100%
Z-Wave received "014 - Laundry Door" status update battery level 100%
Z-Wave received "014 - Laundry Door" status update battery level 100%
Z-Wave received "014 - Laundry Door" status update battery level 100%
Z-Wave received "014 - Laundry Door" status update battery level 100%
Z-Wave received "014 - Laundry Door" status update battery level 100%
Z-Wave received "014 - Laundry Door" status update battery level 100%
Z-Wave received "014 - Laundry Door" status update battery level 100%
Z-Wave received "014 - Laundry Door" status update battery level 100%
Z-Wave received "014 - Laundry Door" status update battery level 100%


Nov 2, 2020 at 7:07:07 PM
Z-Wave received "Foyer Motion" status update is on
Z-Wave received "Foyer Motion" status update is on
Z-Wave received "Media Motion" status update is on
Z-Wave received "Media Motion" status update is on
Z-Wave received "Meter Total" power load to 886.397 W
Z-Wave received "Meter Total" energy total to 19.137 kWh
Z-Wave received "Clamp 1" power load to 317.191 W
Z-Wave received "Clamp 2" power load to 574.936 W
Z-Wave received "Clamp 1" energy total to 9.770 kWh
Z-Wave received "Clamp 2" energy total to 9.367 kWh
Z-Wave received "Clamp 2" energy total to 67118.231 kWh
Z-Wave received "Clamp 2" energy total to 9.367 kWh
Z-Wave received "Clamp 2" energy total to 67118.231 kWh
Z-Wave received "Clamp 2" energy total to 9.367 kWh
Z-Wave received "Clamp 2" energy total to 67118.231 kWh
Z-Wave received "Clamp 2" energy total to 9.367 kWh
Z-Wave received "Clamp 2" energy total to 67118.231 kWh
Z-Wave received "Clamp 2" energy total to 9.367 kWh
Z-Wave received "Clamp 2" energy total to 9.351 kWh
Z-Wave received "Clamp 2" energy total to 9.367 kWh
Z-Wave received "Clamp 2" energy total to 67118.231 kWh
Z-Wave received "Clamp 2" energy total to 9.367 kWh

Posted on
Thu Nov 05, 2020 2:55 pm
matt (support) offline
Site Admin
User avatar
Posts: 21411
Joined: Jan 27, 2003
Location: Texas

Re: Event Log - Device Output

I'm not sure what causes this exactly. Indigo is just reporting the commands it receives and in these cases it does indeed get duplicates. It might be because of collisions (or other signal problems) and modules re-sending commands (possibly on different routes), or it might be firmware buglets in the modules.

Image

Page 1 of 1

Who is online

Users browsing this forum: No registered users and 5 guests