Installed Qubino flush dimmer 0 – 10 V (https://www.amazon.de/gp/product/B01DTE7CUY/) on weekend and it synced fine and functions fine as my garage ventilation control. But there aren't any configuration parameters available in Edit Device Settings screen:
- qubino-0-10v.png (356.4 KiB) Viewed 1067 times
According to manual (from page 37->) there should be some: https://qubino.com/manuals/Flush_Dimmer_0-10V.pdf
Don't know if anyone has posted this items sync log before but here it is:
- Code: Select all
Z-Wave Syncing - started for "Autotallin Ilmanvaihto"
Z-Wave Syncing - retrieved module neighbors list: 22, 23, 28, 90, 91, 92, 93, 94, 95, 96, 99, 101, 105, 108, 114, 115
Z-Wave Syncing - assigning return route to "116 - Autotallin Ilmanvaihto"
Z-Wave Syncing - assigned return route
Z-Wave Syncing - retrieved manufacture and model names: Qubino - 0159, Switch (ZMNHVD3) - 00010053
Z-Wave Syncing - retrieved protocol version 4.34, app version 2.04
Z-Wave Syncing - retrieved class hierarchy: Routing Slave : Mulitlevel Switch : -- (04 : 11 : 00, base 26)
Z-Wave Syncing - retrieved command classes: 20v1 25v1 26v3 27v1 8Ev1 70v1 72v1 73v1 5Ev1 59v1 5Av1 86v1 85v1
Z-Wave Syncing - retrieved encrypt commands: - none -
Z-Wave Syncing - retrieved capabilities: routing, beaming
Z-Wave Syncing - retrieved group 1 associations: [1]
Z-Wave Syncing - retrieved group 2 associations: []
Z-Wave Syncing - retrieved group 3 associations: []
Z-Wave Syncing - retrieved group 4 associations: []
Z-Wave Syncing - retrieved group 5 associations: []
Z-Wave Syncing - retrieved group 6 associations: []
Z-Wave Syncing - group 1 association to interface already exists (skipping)
Z-Wave Syncing - complete
