Page 3 of 4

Re: Steinel Z-Wave Lights

PostPosted: Sun May 27, 2018 4:10 pm
by petematheson
No worries - thanks!
Playing with a new Aeotec LED Strip right now :)

Re: Steinel Z-Wave Lights

PostPosted: Sun May 27, 2018 4:18 pm
by howartp
Ah, both 25 03 and 21 01 are supported.

Have you created a dummy Zwave Scene Controller device?

(New device > Zwave Scene Controller > Zwave Scene Controller)

Peter


Sent from my iPhone using Tapatalk Pro

Re: Steinel Z-Wave Lights

PostPosted: Mon May 28, 2018 6:55 am
by petematheson
OK wow, my logs are being flooded today with this!

Z-Wave Scene Controller Debug On/Off Command received:
Z-Wave Scene Controller Debug Raw command: 01 09 00 04 00 52 03 20 01 00 82
Z-Wave Scene Controller Debug Node: 82
Z-Wave Scene Controller Debug NodeID: 82
Z-Wave Scene Controller Debug ActionRaw: 0
Z-Wave Scene Controller Debug Button: 1
Z-Wave Scene Controller Debug ActionID: 12
Z-Wave Scene Controller Debug Action: Off
Z-Wave Scene Controller Debug Updating device Driveway Flood Motion Sensor with button 1
Z-Wave Scene Controller Debug -----
Z-Wave Scene Controller Debug Node ID 82 found in controllerIDs
Z-Wave Scene Controller Debug -----
Z-Wave Scene Controller Debug On/Off Command received:
Z-Wave Scene Controller Debug Raw command: 01 09 00 04 00 52 03 20 01 00 82
Z-Wave Scene Controller Debug Node: 82
Z-Wave Scene Controller Debug NodeID: 82
Z-Wave Scene Controller Debug ActionRaw: 0
Z-Wave Scene Controller Debug Button: 1
Z-Wave Scene Controller Debug ActionID: 12
Z-Wave Scene Controller Debug Action: Off
Z-Wave Scene Controller Debug Updating device Driveway Flood Motion Sensor with button 1
Z-Wave Scene Controller Debug -----
Z-Wave Scene Controller Debug Node ID 82 found in controllerIDs
Z-Wave Scene Controller Debug -----
Z-Wave Scene Controller Debug On/Off Command received:
Z-Wave Scene Controller Debug Raw command: 01 09 00 04 00 52 03 20 01 00 82
Z-Wave Scene Controller Debug Node: 82
Z-Wave Scene Controller Debug NodeID: 82
Z-Wave Scene Controller Debug ActionRaw: 0
Z-Wave Scene Controller Debug Button: 1
Z-Wave Scene Controller Debug ActionID: 12
Z-Wave Scene Controller Debug Action: Off
Z-Wave Scene Controller Debug Updating device Driveway Flood Motion Sensor with button 1
Z-Wave Scene Controller Debug -----
Z-Wave Scene Controller Debug Node ID 82 found in controllerIDs
Z-Wave Scene Controller Debug -----
Z-Wave Scene Controller Debug On/Off Command received:
Z-Wave Scene Controller Debug Raw command: 01 09 00 04 00 52 03 20 01 00 82
Z-Wave Scene Controller Debug Node: 82
Z-Wave Scene Controller Debug NodeID: 82
Z-Wave Scene Controller Debug ActionRaw: 0
Z-Wave Scene Controller Debug Button: 1
Z-Wave Scene Controller Debug ActionID: 12
Z-Wave Scene Controller Debug Action: Off
Z-Wave Scene Controller Debug Updating device Driveway Flood Motion Sensor with button 1
Z-Wave Scene Controller Debug -----
Z-Wave Scene Controller Debug Node ID 82 found in controllerIDs
Z-Wave Scene Controller Debug -----
Z-Wave Scene Controller Debug On/Off Command received:
Z-Wave Scene Controller Debug Raw command: 01 09 00 04 00 52 03 20 01 00 82
Z-Wave Scene Controller Debug Node: 82
Z-Wave Scene Controller Debug NodeID: 82
Z-Wave Scene Controller Debug ActionRaw: 0
Z-Wave Scene Controller Debug Button: 1
Z-Wave Scene Controller Debug ActionID: 12
Z-Wave Scene Controller Debug Action: Off
Z-Wave Scene Controller Debug Updating device Driveway Flood Motion Sensor with button 1
Z-Wave Scene Controller Debug -----
Z-Wave Scene Controller Debug Node ID 82 found in controllerIDs
Z-Wave Scene Controller Debug -----
Z-Wave Scene Controller Debug On/Off Command received:
Z-Wave Scene Controller Debug Raw command: 01 09 00 04 00 52 03 20 01 00 82
Z-Wave Scene Controller Debug Node: 82
Z-Wave Scene Controller Debug NodeID: 82
Z-Wave Scene Controller Debug ActionRaw: 0
Z-Wave Scene Controller Debug Button: 1
Z-Wave Scene Controller Debug ActionID: 12
Z-Wave Scene Controller Debug Action: Off
Z-Wave Scene Controller Debug Updating device Driveway Flood Motion Sensor with button 1

If I set it up for the other floodlight I get this:
Z-Wave Scene Controller Debug Node ID 85 found in controllerIDs
Z-Wave Scene Controller Debug Node ID 85 found in controllerIDs
Z-Wave Scene Controller Debug Node ID 85 found in controllerIDs
Z-Wave Scene Controller Debug Node ID 85 found in controllerIDs
Z-Wave Scene Controller Debug Node ID 85 found in controllerIDs
Z-Wave Scene Controller Debug Node ID 85 found in controllerIDs
Z-Wave Scene Controller Debug Node ID 85 found in controllerIDs
Z-Wave Scene Controller Debug Node ID 85 found in controllerIDs
Z-Wave Scene Controller Debug Node ID 85 found in controllerIDs
Z-Wave Scene Controller Debug Node ID 85 found in controllerIDs
Z-Wave Scene Controller Debug Node ID 85 found in controllerIDs
Z-Wave Scene Controller Debug Node ID 85 found in controllerIDs
Z-Wave Scene Controller Debug Node ID 85 found in controllerIDs
Z-Wave Scene Controller Debug Node ID 85 found in controllerIDs
Z-Wave Scene Controller Debug Node ID 85 found in controllerIDs
Z-Wave Scene Controller Debug Node ID 85 found in controllerIDs
Z-Wave Scene Controller Debug Node ID 85 found in controllerIDs
Z-Wave Scene Controller Debug Node ID 85 found in controllerIDs
Z-Wave Scene Controller Debug Node ID 85 found in controllerIDs
Z-Wave Scene Controller Debug Node ID 85 found in controllerIDs
Z-Wave Scene Controller Debug Node ID 85 found in controllerIDs

Both of these flooding messages disappear as soon as I remove the association on group 2.

Re: Steinel Z-Wave Lights

PostPosted: Mon May 28, 2018 2:04 pm
by howartp
petematheson wrote:
OK wow, my logs are being flooded today with this!

Z-Wave Scene Controller Debug On/Off Command received:
Z-Wave Scene Controller Debug Raw command: 01 09 00 04 00 52 03 20 01 00 82
Z-Wave Scene Controller Debug Node: 82
Z-Wave Scene Controller Debug NodeID: 82
Z-Wave Scene Controller Debug ActionRaw: 0
Z-Wave Scene Controller Debug Button: 1
Z-Wave Scene Controller Debug ActionID: 12
Z-Wave Scene Controller Debug Action: Off
Z-Wave Scene Controller Debug Updating device Driveway Flood Motion Sensor with button 1
Z-Wave Scene Controller Debug -----
Z-Wave Scene Controller Debug Node ID 82 found in controllerIDs
Z-Wave Scene Controller Debug -----

If I set it up for the other floodlight I get this:
Z-Wave Scene Controller Debug Node ID 85 found in controllerIDs
Z-Wave Scene Controller Debug Node ID 85 found in controllerIDs
Z-Wave Scene Controller Debug Node ID 85 found in controllerIDs

Both of these flooding messages disappear as soon as I remove the association on group 2.


Ok, try .35

https://www.dropbox.com/s/433zczkdm818t ... n.zip?dl=1

DELETE/DISABLE your dummy devices or you will continue getting full logs.

This should just log a single line for all 82/85 commands received so we can see what's happening.

Do you (now or afterwards) get any On commands from the light when you trigger motion?

Peter

Re: Steinel Z-Wave Lights

PostPosted: Wed May 30, 2018 10:32 am
by petematheson
Installed the update, will check when I get home!

Do I need to keep the dummy devices enabled for it to log the information?

Re: Steinel Z-Wave Lights

PostPosted: Wed May 30, 2018 10:37 am
by petematheson
Wife walked past the sensor.

I see:

0 May 2018, 17:35:25
Trigger Motion on Driveway daytime text pete
Schedule Motion on Driveway daytime text pete (delayed action)
Z-Wave Scene Controller Debug Raw Node 82 command: 01 0F 00 04 00 52 09 71 05 00 00 00 FF 07 08 00 2B
Z-Wave Scene Controller Debug Node ID 82 found in controllerIDs

30 May 2018, 17:35:44
Z-Wave Scene Controller Debug Raw Node 82 command: 01 10 00 04 00 52 0A 71 05 00 00 00 FF 07 00 01 08 36
Z-Wave Scene Controller Debug Node ID 82 found in controllerIDs

30 May 2018, 17:36:02
Trigger Motion on Driveway daytime text pete
Schedule Motion on Driveway daytime text pete (delayed action)

30 May 2018, 17:36:18
Z-Wave Scene Controller Debug Raw Node 82 command: 01 0F 00 04 00 52 09 71 05 00 00 00 FF 07 08 00 2B
Z-Wave Scene Controller Debug Node ID 82 found in controllerIDs
Z-Wave Scene Controller Debug Raw Node 82 command: 01 10 00 04 00 52 0A 71 05 00 00 00 FF 07 00 01 08 36
Z-Wave Scene Controller Debug Node ID 82 found in controllerIDs

The light isn't set to come on during daylight (manual switch on the light itself) so it wouldn't have tried to turn the light on I believe.

Re: Steinel Z-Wave Lights

PostPosted: Thu May 31, 2018 6:39 am
by IndigoSam
Not related to resolving the issues you have with notification.

The device itself, what are your thoughts? Any good?

From looking through the install instructions, is it one unit or can the led part be replaced?

Sam.

Re: Steinel Z-Wave Lights

PostPosted: Thu May 31, 2018 6:55 am
by petematheson
IndigoSam wrote:
Not related to resolving the issues you have with notification.

The device itself, what are your thoughts? Any good?

From looking through the install instructions, is it one unit or can the led part be replaced?

Sam.


I’m quite impressed!
It gives off good bright light, was easy to mount and connect and easy to switch on/off from Indigo. Just need to get the motion sensing working through Indigo and I can repurpose my separate motion sensors elsewhere.
It’s one unit aside from the electrics.
If only they were a bit cheaper, particularly the lights vs the flood lights


Sent from my iPhone using Tapatalk

Re: Steinel Z-Wave Lights

PostPosted: Fri Sep 21, 2018 3:01 pm
by Albatros
Did you get the motion on/of in Indigo working and does it report lux.

Re: Steinel Z-Wave Lights

PostPosted: Fri Sep 21, 2018 3:13 pm
by petematheson
Albatros wrote:
Did you get the motion on/of in Indigo working and does it report lux.


Not really had time to figure out more yet. It works on motion and that’s about it. Hoping maybe 7.2 might have native support


Sent from my iPhone using Tapatalk

Re: Steinel Z-Wave Lights

PostPosted: Sun Oct 07, 2018 2:25 am
by lochnesz
Is it better with 7.2?

Skickat från min SM-G960F via Tapatalk

Re: Steinel Z-Wave Lights

PostPosted: Sun Oct 07, 2018 2:27 am
by petematheson
Didn’t see any updates in 7.2 for this light so haven’t yet upgraded!


Sent from my iPhone using Tapatalk

Re: Steinel Z-Wave Lights

PostPosted: Sun Oct 07, 2018 5:49 am
by Albatros
Its a pity and frustrating that supporting devices takes more than a year or even they don't get supported.

- Fibaro RGBW 0-10v never supported by indigo and no plans to do it. This would give lots of opportunity to read sensor form wind, C02, Lux sensors etc. Just see how Loxone is doing that
- Steinel z-wave. Their are hardly any outside z-wave motion sensors with lux support and it is not added to 7.2. I am not getting it. Takes another year or it does not even gets supported


Besides decisions on what and what not to support. One year or not to get devices supported is not the right tempo for a domotics platform. Why not change it to every 3 months or if it is that much of work make it available for others to make device profiles. Just like homey does or Domoticz. The community can make them.

Wasn't the purpose of the license model change...

Re: Steinel Z-Wave Lights

PostPosted: Tue Oct 09, 2018 12:46 am
by lochnesz
Albatros wrote:
Its a pity and frustrating that supporting devices takes more than a year or even they don't get supported.


As much as I like Indigo, the limited device support and the pace of adding new devices was the reason for my doubt regarding continuing my subscription. I would appreciate if adding support for more "new" devices was more prioritized.

I thought that the new subscription model would speed this up. :roll:

Re: Steinel Z-Wave Lights

PostPosted: Tue Oct 09, 2018 9:02 am
by matt (support)