Indigo Domotics

After indigo upgrade, it appears that the system is running normally with both insteon and z wave devices; but I can not configure z wave network. Under Interface menu the Z wave option is "greyed out" , Does USB Z-stick need an upgrade?

Quit and relaunch the Indigo client app. If that doesn't help shutdown and restart the Indigo Server (via the Indigo 7->Stop Server menu item).

Does that help?

If not, after the Indigo Server restart open the Event Log window and copy/paste its contents into a reply for me.

That fixed it! Thanks for your quick reply.
So far I am excited about the new capabilities! Thanks for listening to my (0ur) requests! Especially managing the network without carrying the stick around....

Hey Matt,

My Indigo system died, so I've transplanted it to my iMac, and I've run into the same issue...

1) I've restarted the Indigo server multiple times
2) Reinstalled Indigo as well.
3) Everything seems to be working, but I'm having some zWave wonkyness, so I was going to have it re-setup the network, when I discovered the Zwave interface menu is greyed out...

Here's the log file:

Code: Select all

  Energy Monitor                  Energy Monitor, Sleep Interval is 900
   Energy Monitor                  PReferences DAtaLogcation - ~/Dropbox/HomeAutomation/Energy_Data
   Energy Monitor                  Energy Data Path - /Users/Benjamin/Dropbox/HomeAutomation/Energy_Data
   Started plugin "Energy Monitor 2.10"
   Started interface "Z-Wave 2.0.111"
   Started plugin "Hue Lights 1.6.6"
   Energy Monitor                  Loading past energy usage for week 31-2018.pickle
   Energy Monitor                  Setting up Device - Power Monitor
   Energy Monitor                  Current Device Version - 3
   Energy Monitor                  Checking Energy meter 497160003
   Hue Lights                      Loaded 2 lights.
   Hue Lights                      Loaded 12 groups.
   Hue Lights                      Loaded 17 scenes.
   Hue Lights                      Loaded 7 sensors.
   Energy Monitor                  Weekly Label- 31-2018
   Energy Monitor                  Daily Label- 214-2018
   Energy Monitor                  Weekly - ['31-2018']
   Energy Monitor                  Daily - ['213-2018', '214-2018']
   Energy Monitor                  today - {'accumEnergyTimeDelta': 38419348, 'accumEnergyTotal': 11557.497, 'curEnergyLevel': 3316.94, 'time': 'Thu Aug  2 22:14:32 2018'}
   Energy Monitor                  Writing all data to disk.
   Started interface "Z-Wave 2.0.111"
   Started plugin "Hue Lights 1.6.6"
   Energy Monitor                  Loading past energy usage for week 31-2018.pickle
   Energy Monitor                  Setting up Device - Power Monitor
   Energy Monitor                  Current Device Version - 3
   Energy Monitor                  Checking Energy meter 497160003
   Hue Lights                      Loaded 2 lights.
   Hue Lights                      Loaded 12 groups.
   Hue Lights                      Loaded 17 scenes.
   Hue Lights                      Loaded 7 sensors.
   Energy Monitor                  Weekly Label- 31-2018
   Energy Monitor                  Daily Label- 214-2018
   Energy Monitor                  Weekly - ['31-2018']
   Energy Monitor                  Daily - ['213-2018', '214-2018']
   Energy Monitor                  today - {'accumEnergyTimeDelta': 38419348, 'accumEnergyTotal': 11557.497, 'curEnergyLevel': 3316.94, 'time': 'Thu Aug  2 22:14:32 2018'}
   Energy Monitor                  Writing all data to disk.
   Started plugin "EPS - Homebridge Buddy 1.0.1"
   EPS - Homebridge Buddy          Starting the Homebridge server 'homenet homebridge', do not try to use Siri until you get a message that the server has started
   WebServer client connected
   WebServer                       started on port 8176 -- digest authentication enabled
   Z-Wave                          connected to Z-Stick S2 interface on /dev/cu.SLAB_USBtoUART (firmware 3.07)
   Z-Wave                          found module included in controller with no matching device (missing or disabled): 008 - Relay Scene Switch
   Z-Wave                          found module included in controller with no matching device (missing or disabled): 011 - Portable Controller

Aug 2, 2018 at 10:14:35 PM
   Trigger                         Reset Chime Status @ startup
   Error                           error finding script file: Weather NOAA sync.scpt - file not found
   Connected to PowerLinc 2413U interface on port usbserial-A60333BY
   PowerLinc address 2B.93.28, firmware version 9.11
   EPS - Homebridge Buddy          EPS - Homebridge Buddy is loaded and ready to use

When you moved to the new Mac and copied over the appropriate folder, did you rerun the Indigo installer?

jay (support) wrote:

When you moved to the new Mac and copied over the appropriate folder, did you rerun the Indigo installer?

Yes, I did....

A few more questions:

• Besides the Z-Wave interface menu being grayed out, what other Z-Wave "wonkyness" are you seeing specifically? (there don't appear to be any errors in the event log snippit above)
• Are you on v7.1.1?
• What OS version?

jay (support) wrote:

A few more questions:

• Besides the Z-Wave interface menu being grayed out, what other Z-Wave "wonkyness" are you seeing specifically? (there don't appear to be any errors in the event log snippit above)
• Are you on v7.1.1?
• What OS version?

I'm seeing occasional timeouts on zwave transmissions...

Yes, 7.1.1. On MOSX 10.3.4.

Well, after a horrible Saturday for Home Automation, everything appears to be fine.

1) Even though everything had been working fine, Suddenly on Saturday Insteon died (continuous Resend loop)... Ended up using the workaround for 10.3.x, with the FTDI driver, which originally seemed to not make a difference... But eventually it just suddenly started back up fine... But it was just that one outlet where I was having an issue... Weird...

2) The Interface -> Zwave configuration options are now working after the FTDI workaround. I can't explain why, but my Zwave network is back up and working without any issue, after optimizing and a bit of trial and effort... (Repositioning the zWave adapter, etc).

Now to update the Survey plugin...

- Benjamin