Hi Matt,
thanks so much for looking into this for me! Here is the log:
---------------------------------------------------------------------------------------------------
Apr 24, 2021 at 5:09:58 PM
PowerLinc Linking - entered discovery linking mode (240 seconds)
PowerLinc Linking - syncing PowerLinc links (address 49.F8.80)
PowerLinc Linking - . . adding: INSTEON plc link to controller 4F.5D.9E, flags 03, group 01, data 00 00 FF
PowerLinc Linking - . . adding: (not added -- probably already exists)
PowerLinc Linking - PowerLinc links updated
PowerLinc Linking - sync complete
PowerLinc Linking - sending engine version request to 4F.5D.9E
PowerLinc Linking - received engine version 02 from 4F.5D.9E
PowerLinc Linking - sending id request for device information to 4F.5D.9E
PowerLinc Linking - received id request response from 4F.5D.9E
PowerLinc Linking - initializing remote device "303.S1" (address 4F.5D.9E, firmware version 45)
PowerLinc Linking - . reading: configuration settings
PowerLinc Linking - . . . read: configuration settings 0C, keypad in 8 button mode
PowerLinc Linking - . . . read: backlight brightness 100%
PowerLinc Linking - . . . read: default on brightness 80%, ramp rate duration 8.5 seconds
PowerLinc Linking - initialize complete
PowerLinc Linking - syncing remote device "303.S1" (address 4F.5D.9E, firmware version 45)
PowerLinc Linking - device "303.S1" properties updated
PowerLinc Linking - syncing all links
PowerLinc Linking - . . . read: INSTEON dev link to controller 49.F8.80, flags AA, group FE, data 00 1C 00
PowerLinc Linking - . . . read: INSTEON dev link to responder 49.F8.80, flags E2, group 01, data 03 1F 01
PowerLinc Linking - . . . read: INSTEON dev link to responder 49.F8.80, flags E2, group 02, data 03 1F 02
PowerLinc Linking - . . . read: INSTEON dev link to responder 49.F8.80, flags E2, group 03, data 03 1F 03
PowerLinc Linking - . . . read: INSTEON dev link to responder 49.F8.80, flags EA, group 04, data 03 1F 04
PowerLinc Linking - . . . read: INSTEON dev link to responder 49.F8.80, flags EA, group 05, data 03 1F 05
PowerLinc Linking - . . . read: INSTEON dev link to responder 49.F8.80, flags EA, group 06, data 03 1F 06
PowerLinc Linking - . . . read: INSTEON dev link to responder 49.F8.80, flags EA, group 07, data 03 1F 07
PowerLinc Linking - . . . read: INSTEON dev link to responder 49.F8.80, flags EA, group 08, data 03 1F 08
PowerLinc Linking - . . . read: INSTEON dev link to controller 51.72.62, flags A2, group 03, data 8C 1C 01
PowerLinc Linking - . . . read: INSTEON dev link to responder 51.72.62, flags E2, group 06, data 03 1F 06
PowerLinc Linking - . . . read: INSTEON dev link to responder 4E.67.49, flags E2, group 02, data 03 1F 02
PowerLinc Linking - . . . read: INSTEON dev link to responder 4E.65.60, flags E2, group 03, data 03 1F 03
PowerLinc Linking - . . . read: INSTEON dev link to responder 43.65.8B, flags E2, group 04, data 03 1F 04
PowerLinc Linking - . . . read: INSTEON dev link to responder 4F.61.34, flags E2, group 05, data 03 1F 05
PowerLinc Linking - . . . read: INSTEON dev link to controller 4F.61.34, flags A2, group 05, data CC 1C 01
PowerLinc Linking - . . . read: INSTEON dev link to controller 43.65.8B, flags A2, group 05, data CC 1C 01
PowerLinc Linking - . . . read: INSTEON dev link to controller 49.F8.80, flags A2, group 0A, data FF 1F 02
PowerLinc Linking - . . . read: INSTEON dev link to controller 49.F8.80, flags A2, group 0C, data FF 1F 04
PowerLinc Linking - . . . read: INSTEON dev link to controller 49.F8.80, flags A2, group 0D, data FF 1F 03
PowerLinc Linking - . . . read: INSTEON dev link to controller 49.F8.80, flags A2, group 0E, data FF 1F 05
PowerLinc Linking - . . . read: INSTEON dev link to controller 49.F8.80, flags A2, group 0F, data FF 1F 06
PowerLinc Linking - . . . read: INSTEON dev link to controller 49.F8.80, flags A2, group 17, data FF 1F 07
PowerLinc Linking - . . . read: INSTEON dev link to controller 49.F8.80, flags A2, group 18, data FF 1F 08
PowerLinc Linking - . . found: PowerLinc responder for group 1
PowerLinc Linking - . . found: PowerLinc responder for group 2
PowerLinc Linking - . . found: PowerLinc responder for group 3
PowerLinc Linking - . . found: PowerLinc responder for group 4
PowerLinc Linking - . . found: PowerLinc responder for group 5
PowerLinc Linking - . . found: PowerLinc responder for group 6
PowerLinc Linking - . . found: PowerLinc responder for group 7
PowerLinc Linking - . . found: PowerLinc responder for group 8
PowerLinc Linking - comparing local and remote links
PowerLinc Linking - . mismatch: remote link differs from persistent link 51.72.62, flags A2, group 03 (changing remote link)
PowerLinc Linking - . . match: remote link is identical to persistent link 51.72.62, flags E2, group 06
PowerLinc Linking - . . match: remote link is identical to persistent link 4E.67.49, flags E2, group 02
PowerLinc Linking - . . match: remote link is identical to persistent link 4E.65.60, flags E2, group 03
PowerLinc Linking - . . match: remote link is identical to persistent link 43.65.8B, flags E2, group 04
PowerLinc Linking - . . match: remote link is identical to persistent link 4F.61.34, flags E2, group 05
PowerLinc Linking - . . match: remote link is identical to persistent link 4F.61.34, flags A2, group 05
PowerLinc Linking - . . match: remote link is identical to persistent link 43.65.8B, flags A2, group 05
PowerLinc Linking - . . match: remote link is identical to persistent link 49.F8.80, flags A2, group 0A
PowerLinc Linking - . . match: remote link is identical to persistent link 49.F8.80, flags A2, group 0C
PowerLinc Linking - . . match: remote link is identical to persistent link 49.F8.80, flags A2, group 0D
PowerLinc Linking - . . match: remote link is identical to persistent link 49.F8.80, flags A2, group 0E
PowerLinc Linking - . . match: remote link is identical to persistent link 49.F8.80, flags A2, group 0F
PowerLinc Linking - . . match: remote link is identical to persistent link 49.F8.80, flags A2, group 17
PowerLinc Linking - . . match: remote link is identical to persistent link 49.F8.80, flags A2, group 18
PowerLinc Linking - compare complete
PowerLinc Linking - . changing: INSTEON dev link to controller 51.72.62, flags A2, group 03, data 8C 1C 01
PowerLinc Linking - . . . . to: INSTEON dev link to controller 51.72.62, flags A2, group 03, data CC 1C 01
PowerLinc Linking - sync complete
PowerLinc Linking - device "303.S1" links updated
PowerLinc Linking - exited linking mode
Sent INSTEON "303.S1" status request (received: 0)
Sent INSTEON "303.S1" keypad button states request (received: 0, 0, 0, 0, 0, 0, 0, 0)
Received INSTEON "303.S1" on (button 7)
Trigger Turn On Blinds 303.S1
Action Group Blinds ON
Virtual Devices sent "Blinds" on
Trigger Blinds ON (button change)
Sent INSTEON "PowerLinc Interface" on to 100% (instant) (scene 23 - Blinds)
Received INSTEON "303.S1" on (button 7)
Trigger Turn On Blinds 303.S1
Action Group Blinds ON
Virtual Devices sent "Blinds" on
Received INSTEON "303.S1" on (button
Trigger Turn On Skylights 303.S1
Action Group Skylights ON
Virtual Devices sent "Skylights" on
Trigger Skylights ON (button change)
Schedule Skylights ON (button change) (delayed action)
Sent INSTEON "PowerLinc Interface" on to 100% (instant) (scene 24 - Skylights)
Received INSTEON "303.S1" off (button
Trigger Turn Off Skylights 303.S1
Action Group Skylights OFF
Virtual Devices sent "Skylights" off
Trigger Skylights OFF (button change)
Sent INSTEON "PowerLinc Interface" off (instant) (scene 24 - Skylights)
Apr 24, 2021 at 5:11:58 PM
Received INSTEON "306.S2" on (button 5)
Trigger Turn ON Blinds 306.S2
Action Group Blinds ON
Virtual Devices sent "Blinds" on
Received INSTEON "306.S2" off (button 5)
Trigger Turn OFF Blinds 306.S2
Action Group Blinds OFF
Virtual Devices sent "Blinds" off
Trigger Blinds OFF (button change)
Sent INSTEON "PowerLinc Interface" off (instant) (scene 23 - Blinds)
---------------------------------------------------------------------------------------------------
I pressed the Blinds Off Button on 303.S1 after I pressed the blinds On button. But it seems it doesn't even register in the log. The Skylights button on 303.S1 works fine. And the Skylights AND blind buttons on 306.S2 work fine as well.
Please let me know if you need me to send you any other info.
Thanks!
Philipp