Page 1 of 1

Sharp TV Network Remote Plugin - Introduction & Installation

PostPosted: Fri Nov 01, 2013 12:35 pm
by RogueProeliator
Introduction
This plugin allows Indigo to control Sharp AQUOS televisions via their network (IP) control protocol. Sharp's protocol is very robust and, as a result, this plugin is able to both read and set nearly every aspect of the television - from volume/channel through configurations such as picture mode, aspect ratio, etc.

Links
Plugin Store Entry | Full Documentation | GitHub Repo | Indigo 6 Plugin

Re: Sharp TV Network Remote Plugin - Introduction & Installa

PostPosted: Tue Nov 19, 2013 9:49 pm
by RogueProeliator
v1.0.3 Released
A new version, v1.0.3, of the Sharp TV Network Remote Plugin has been released. This is a minor update:

  • Created better state detection for disconnected devices and error states

Re: Sharp TV Network Remote Plugin - Introduction & Installa

PostPosted: Sun Dec 08, 2013 9:06 pm
by RogueProeliator
v1.0.4 Released
Sharp TV Network Remote has been upgraded to v1.0.4, with the following changes:

  • Improved format and sorting of device configuration and action dialogs/menus to make them easier to use

Re: Sharp TV Network Remote Plugin - Introduction & Installa

PostPosted: Sat Jan 25, 2014 11:38 pm
by RogueProeliator
v1.1.6 Released
Sharp TV Network Remote has been upgraded to v1.1.6, with the following changes:

  • Improved error handling for invalid and error responses from the television
  • Added support for LC-60C6500U (Costo/Sam's version of LC-60LE650)

Re: Sharp TV Network Remote Plugin - Introduction & Installa

PostPosted: Thu Jul 03, 2014 2:42 pm
by RogueProeliator
v1.2.9 Released
Sharp TV Network Remote has been upgraded to v1.2.9, with the following changes:

  • Improved error handling to suppress a couple of unnecessary errors from hitting the Indigo log
  • Added support to auto-reconnect to the television whenever a connection is lost (e.g. power outage or network interruption). Previously the plugin would attempt to reconnect whenever the next command was issued, but this prevented status updates in the interim.

Re: Sharp TV Network Remote Plugin - Introduction & Installa

PostPosted: Tue Sep 02, 2014 8:27 pm
by RogueProeliator
v1.3.9 Released
Sharp TV Network Remote has been upgraded to v1.3.9, with the following changes:

  • Added additional A/V Modes available to enable those on newer televisions

Re: Sharp TV Network Remote Plugin - Introduction & Installa

PostPosted: Sun Mar 08, 2015 6:41 pm
by RogueProeliator
v1.3.14 Released
Sharp TV Network Remote has been upgraded to v1.3.14, with the following changes:

  • Faster reaction to multiple key presses (such as multiple volume up/down presses
  • Added the ability to send any arbitrary command for debugging / testing purposes
  • Added event that fires whenever the plugin finds an update available

Re: Sharp TV Network Remote Plugin - Introduction & Installa

PostPosted: Thu Oct 08, 2015 7:34 am
by RogueProeliator
v1.4.18 Released
Sharp TV Network Remote has been upgraded to v1.4.18, with the following changes:

  • Better debugging and logging messages to the Indigo Log
  • Added ability to turn off status polling or disable status updates completely
  • Unicode support

Re: Sharp TV Network Remote Plugin - Introduction & Installa

PostPosted: Tue Feb 09, 2016 4:07 pm
by RogueProeliator
v1.4.19 Released
Sharp TV Network Remote has been upgraded to v1.4.19, with the following minor changes:

  • Fixes bug that caused plugin to fail to load if the download was renamed prior to installation

Re: Sharp TV Network Remote Plugin - Introduction & Installa

PostPosted: Sat Nov 12, 2016 11:29 pm
by RogueProeliator
v2.0.0 Released
Sharp TV Network Remote has been upgraded to v2.0.0 and may be downloaded here. The following changes are included:

  • Changed Status column / display to show On/Off (Power) state rather than connection status
  • Indigo 7 is now required for this and all future plugin versions

Re: Sharp TV Network Remote Plugin - Introduction & Installa

PostPosted: Sat Nov 14, 2020 7:47 pm
by RogueProeliator
v2.1.0 Released
  • Brought plugin up to Indigo 7.1+ standards
  • Updated version check to avoid duplicate calls

v2.1.1 Released
  • Updated to Indigo 7.3+ standards
  • Unified plugin UI across all RogueProeliator plugins
  • Now requires Indigo 7.3+ (old versions will remain available for previous versions)