MCOHome Double switch MH-S412

Hello all,

Is anyone using this switch with indigo successfully? I have a strange situation where, if SW1 is activated SW2 also activates. I've already submitted the templates to Indigo support, but was wondering if anyone had this before.

Best,

Rui

[matt (support)]

Hi Rui,

I think we'll need to add a device definition to Indigo for the MH-S412. Can you re-sync it in Indigo (via the Device dialog), then copy/paste the Event Log window results into a reply for me?

Hi Matt,

Sorry for the delay. Here's the output:

Syncing - started for "Aplique Hall 1º andar"
Z-Wave Syncing - retrieved module neighbors list: 2, 4, 5, 6, 8, 9, 10, 11, 13, 14, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 28, 36, 37, 38, 39, 41, 43, 44, 45, 46, 54, 59, 60, 62, 64, 65, 69, 70, 71
Z-Wave Syncing - assigning return route to "007 - Aplique Hall 1º andar"
Z-Wave Syncing - assigned return route
Z-Wave Syncing - retrieved manufacture and model names: MCOHome - 015F, Relay Power Switch - 41215102
Z-Wave Syncing - retrieved protocol version 4.62, app version 5.11
Z-Wave Syncing - retrieved class hierarchy: Routing Slave : Relay Switch : Relay Power Switch (04 : 10 : 01, base 25)
Z-Wave Syncing - retrieved command classes: 20v1 25v1 27v1 5Ev1 85v1 59v1 8Ev1 60v4 55v1 86v1 72v1 5Av1 73v1 70v1 2Cv1 2Bv1 5Bv1 7Av1
Z-Wave Syncing - retrieved encrypt commands: - none -
Z-Wave Syncing - retrieved capabilities: routing, beaming
Z-Wave Syncing - retrieved multi-endpoint types: 1:(10 : 01), 2:(10 : 01)
Z-Wave Syncing - retrieved multi-endpoint classes: 1:[5E 85 59 8E 25 27], 2:[5E 85 59 8E 25 27]
Z-Wave Syncing - retrieved group 1 associations: [1]
Z-Wave Syncing - retrieved group 2 associations: []
Z-Wave Syncing - retrieved group 3 associations: []
Z-Wave Syncing - retrieved group 4 associations: []
Z-Wave Syncing - retrieved group 5 associations: []
Z-Wave Syncing - retrieved group 6 associations: []
Z-Wave Syncing - group 1 association to interface already exists (skipping)
Z-Wave Syncing - complete

Best,

Rui

[matt (support)]

Thanks, I'll add this to my list.

Hi Matt,

Any luck of getting this integrated soon? House is basically ready and I do need to start configuring stuff...

Best,

Rui

And one more thing, is there a way to do multi channel association?

Best,

Rui

[matt (support)]

Still on the list and hopefully (likely) will make it into the next release.

Indigo doesn't have UI for multi-channel associations, but once we create a definition for this one it will automatically create the associations needed so that it communicates back to Indigo both relay statuses (hopefully!).

Perfect. Any hint on when?

Best,

Rui

[matt (support)]

Afraid not, but we are working on it.

[matt (support)]

We've added support for the MH-S412 in Indigo 2022.2.0, which is now available.