Z-Wave Device Sync issues

Finally got around to pairing my Relay Switch from Zooz (ZEN71). The only problem is when I go to create a new device and sync, I get the error that it timed out or is off.

My event log looks like this:
Apr 14, 2022 at 3:54:05 PM
Z-Wave Syncing - started for "008 - Relay Power Switch"
Z-Wave Syncing - retrieved module neighbors list: 4, 7
Z-Wave Syncing - assigning return route to "008 - Relay Power Switch"
Z-Wave Error Syncing - failed to assign return route
Z-Wave Error Syncing - failed
Z-Wave Error Timeout waiting for "008 - Relay Power Switch". Module might be asleep, or is unreachable.
Z-Wave Syncing - started for "009 - Relay Power Switch"
Z-Wave Syncing - retrieved module neighbors list: 4, 7
Z-Wave Syncing - assigning return route to "009 - Relay Power Switch"
Z-Wave Error Syncing - failed to assign return route
Z-Wave Error Syncing - failed
Z-Wave Error Timeout waiting for "009 - Relay Power Switch". Module might be asleep, or is unreachable.
Z-Wave started controller inclusion mode
Z-Wave stopping controller inclusion mode
Z-Wave stopped controller inclusion mode
Z-Wave Syncing - started for "009 - Relay Power Switch"
Z-Wave Syncing - retrieved module neighbors list: 4, 7
Z-Wave Syncing - assigning return route to "009 - Relay Power Switch"
Z-Wave Error Syncing - failed to assign return route
Z-Wave Error Syncing - failed
Z-Wave Error Timeout waiting for "009 - Relay Power Switch". Module might be asleep, or is unreachable.


Any ideas on how I can get it to sync?

There could be a couple issues at work.

There could be issues with the distance between the switch and the Z-Stick. With respect to distance, walls matter and a 6 inch wall could be a foot thick depending on the angle that the signal passes through the wall. More walls, more trouble. Is it possible to move the Indigo server and Z-Stick closer to the switch?

There could be issues with the number of hops between the Z-Stick and the switch. There are a maximum number of hops allowed; I don't recall the exact number off-hand, but it's 4 or 5 I think.

The switch should be able to sync at any time since it's a mains-powered device, but try switching the load manually and try to sync quickly afterwards.

Sometimes devices don't include properly and may require a re-include. First, try to EXCLUDE the device and then try to re-include it.

Sometimes, you can come across a dud, too. Has happened to me before (to be fair, not with Zooz--I don't have any of those in my system).

Hops is max 6 devices including the Zstick and the device in question.

1(Stick) > 2 > 3 > 4 > 5 > 6(Device)


Sent from my iPad using Tapatalk Pro

As far as number of hops, I only have a Z-Wave Thermostat, Z-Wave wall plug and Z-Wave Door Lock, so I dont think its number of hops being the issue. I took my Z-Wave stick right next to the device and included it to get it to show up in Indigo in the first place.

[jay (support)]

I took my Z-Wave stick right next to the device and included it to get it to show up in Indigo in the first place.

That might be the problem. Exclude it, then reinclude it from Indigo while it's plugged into your Mac.

I'm having an issue getting a new UltraPro In-wall z-wave smart dimmer to sync. I've tried troubleshooting using other posts on the forum. Here is the logout put when attempting to sync the device (with z-wave debug enabled):

Code: Select all

Oct 16, 2022 at 3:01:12 PM
   Z-Wave Debug                    intiatingSyncUI (timeout in 1500 seconds)
   Z-Wave                          Syncing - started for "013 - Dimmable Power Switch"
   Z-Wave Debug                    SENT getNodeNeighbors: 01 06 00 80 0D 01 01 74
   Z-Wave Debug                    RCVD getNodeNeighbors: 01 20 01 80 19 0A 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 4D (no inbound callback)
   Z-Wave Debug                    . .  getNodeNeighbors: nodeId 013, neighbors: 1, 4, 5, 10, 12
   Z-Wave                          Syncing - retrieved module neighbors list: 1, 4, 5, 10, 12
   Z-Wave                          Syncing - assigning return route to "013 - Dimmable Power Switch"
   Z-Wave Debug                    SENT assignReturnRoute: 01 05 00 46 0D 01 B0
   Z-Wave Debug                    RCVD assignReturnRoute: 01 04 01 46 01 BD (no inbound callback)
   Z-Wave Debug                    RCVD assignReturnRoute: 01 05 00 46 01 01 BC
   Z-Wave Debug                    . .  assignReturnRoute: node 013, success 0
   Z-Wave Error                    Syncing - failed to assign return route
   Z-Wave Debug                    SENT requestNodeInfo: 01 06 00 60 0D 24 F3 43
   Z-Wave Debug                    RCVD requestNodeInfo: 01 06 00 49 81 00 00 31
   Z-Wave Debug                    RCVD requestNodeInfo: failed (module asleep or doesn't support command)
   Z-Wave Error                    Syncing - failed
   Z-Wave Error                    No response from "013 - Dimmable Power Switch". Module might be asleep, or is unreachable.

Oct 16, 2022 at 3:01:46 PM
   Z-Wave Debug                    terminatingSyncUI


Thanks - Paul

Was able to sort the issue by removing failed devices and start the sequence over (I also changed the position of the z-wave stick, not sure if this was impactful but worth mentioning)

Code: Select all

Oct 16, 2022 at 3:19:08 PM
   Z-Wave Debug                    SENT requestHasNodeFailed: 01 04 00 62 03 9A
   Z-Wave Debug                    RCVD requestHasNodeFailed: 01 04 01 62 01 99 (no inbound callback)
   Z-Wave Debug                    SENT removeFailedNode: 01 04 00 61 03 99
   Z-Wave Debug                    RCVD removeFailedNode: 01 04 01 61 00 9B (no inbound callback)
   Z-Wave                          removing from controller failed module "003 - Relay Power Switch"
   Z-Wave Debug                    RCVD removeFailedNode: 01 05 00 61 02 01 98
   Z-Wave Debug                    . .  removeFailedNode: node 003, status 2
   Z-Wave Debug                    SENT requestHasNodeFailed: 01 04 00 62 04 9D
   Z-Wave Debug                    RCVD requestHasNodeFailed: 01 04 01 62 00 98 (no inbound callback)
   Z-Wave Debug                    SENT requestHasNodeFailed: 01 04 00 62 05 9C
   Z-Wave Debug                    RCVD requestHasNodeFailed: 01 04 01 62 00 98 (no inbound callback)
   Z-Wave Debug                    SENT requestHasNodeFailed: 01 04 00 62 0A 93
   Z-Wave Debug                    RCVD requestHasNodeFailed: 01 04 01 62 00 98 (no inbound callback)
   Z-Wave Debug                    SENT requestHasNodeFailed: 01 04 00 62 0C 95
   Z-Wave Debug                    RCVD requestHasNodeFailed: 01 04 01 62 00 98 (no inbound callback)
   Z-Wave Debug                    SENT requestHasNodeFailed: 01 04 00 62 0D 94
   Z-Wave Debug                    RCVD requestHasNodeFailed: 01 04 01 62 01 99 (no inbound callback)
   Z-Wave Debug                    SENT removeFailedNode: 01 04 00 61 0D 97
   Z-Wave Debug                    RCVD removeFailedNode: 01 04 01 61 00 9B (no inbound callback)
   Z-Wave                          removing from controller failed module "013 - Dimmable Power Switch"
   Z-Wave Debug                    RCVD removeFailedNode: 01 05 00 61 02 01 98
   Z-Wave Debug                    . .  removeFailedNode: node 013, status 2
   Z-Wave                          reloading module information from controller
   Z-Wave Debug                    stopping node healing thread
   Z-Wave Debug                    stopping node status polling thread
   Z-Wave Debug                    stopped zwave packet parser thread
   Z-Wave                          connection reset requested
   Z-Wave Debug                    starting serial connection loop
   Z-Wave Debug                    starting zwave packet parser thread
   Z-Wave Debug                    SENT getVersion: 01 03 00 15 E9
   Z-Wave Debug                    RCVD getVersion: 01 10 01 15 5A 2D 57 61 76 65 20 32 2E 37 38 00 01 9B (no inbound callback)
   Z-Wave Debug                    . .  getVersion: Z-Wave 2.78 static controller
   Z-Wave Debug                    SENT getHomeID: 01 03 00 20 DC
   Z-Wave Debug                    RCVD getHomeID: 01 08 01 20 01 84 CD AF 01 30 (no inbound callback)
   Z-Wave Debug                    . .  getHomeID: 0184CDAF, nodeID: 001
   Z-Wave Debug                    SENT getInterfaceFeatures: 01 03 00 05 F9
   Z-Wave Debug                    RCVD getInterfaceFeatures: 01 04 01 05 18 E7 (no inbound callback)
   Z-Wave Debug                    . .  getInterfaceFeatures: 18
   Z-Wave Debug                    SENT getInterfaceApiCapabilities: 01 03 00 07 FB
   Z-Wave Debug                    RCVD getInterfaceApiCapabilities: 01 2B 01 07 03 07 00 86 00 02 00 01 FE 80 FE 88 0F 00 00 00 FB 97 7F 82 07 00 00 80 00 80 00 00 00 00 00 00 00 00 00 00 00 00 00 00 C2 (no inbound callback)
   Z-Wave Debug                    . .  getInterfaceApiCapabilities: supportedFuncIDs: 02 03 04 05 06 07 08 10 12 13 14 15 16 17 18 1C 20 21 22 23 24 41 42 44 45 46 47 48 49 4A 4B 4D 50 51 52 53 54 55 56 57 5A 60 61 62 63 80 90
   Z-Wave Debug                    . .  getInterfaceApiCapabilities: serialApi 3.07, manufactureId 0086, productType 0002, productId 0001
   Z-Wave                          connected to Z-Stick S2 interface on /dev/cu.usbserial-0001 (firmware 3.07, SDK unknown)
   Z-Wave Debug                    SENT forceSUC: 01 05 00 54 01 01 AE
   Z-Wave Debug                    RCVD forceSUC: 01 04 01 54 01 AF (no inbound callback)
   Z-Wave Debug                    SENT getInitialNodeData: 01 03 00 02 FE
   Z-Wave Debug                    RCVD getInitialNodeData: 01 25 01 02 05 08 1D 19 0A 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 03 01 D8 (no inbound callback)
   Z-Wave Debug                    . .  getInitialNodeData: is static update controller
   Z-Wave Debug                    . .  getInitialNodeData: [1, 4, 5, 10, 12]
   Z-Wave Debug                    SENT getNodeProtocolInfo: 01 04 00 41 01 BB
   Z-Wave Debug                    RCVD getNodeProtocolInfo: 01 09 01 41 92 16 00 02 02 01 33 (no inbound callback)
   Z-Wave Debug                    . .  getNodeProtocolInfo:       node 001, class name: Static Computer Controller
   Z-Wave Debug                    . .  getNodeProtocolInfo:            class hierarchy: Static Controller : Static Controller : Static Computer Controller (02 : 02 : 01)
   Z-Wave Debug                    . .  getNodeProtocolInfo:         base class command: 00
   Z-Wave Debug                    . .  getNodeProtocolInfo:   supported class commands: 20
   Z-Wave Debug                    . .  getNodeProtocolInfo:     encrypt class commands:
   Z-Wave Debug                    . .  getNodeProtocolInfo:                   features: beaming
   Z-Wave Debug                    SENT getNodeProtocolInfo: 01 04 00 41 04 BE
   Z-Wave Debug                    RCVD getNodeProtocolInfo: 01 09 01 41 D3 9C 00 04 10 01 EC (no inbound callback)
   Z-Wave Debug                    . .  getNodeProtocolInfo:       node 004, class name: Relay Power Switch
   Z-Wave Debug                    . .  getNodeProtocolInfo:            class hierarchy: Routing Slave : Relay Switch : Relay Power Switch (04 : 10 : 01)
   Z-Wave Debug                    . .  getNodeProtocolInfo:         base class command: 25
   Z-Wave Debug                    . .  getNodeProtocolInfo:   supported class commands: 20 25 27
   Z-Wave Debug                    . .  getNodeProtocolInfo:     encrypt class commands:
   Z-Wave Debug                    . .  getNodeProtocolInfo:                   features: routing, beaming
   Z-Wave Debug                    SENT getNodeProtocolInfo: 01 04 00 41 05 BF
   Z-Wave Debug                    RCVD getNodeProtocolInfo: 01 09 01 41 D3 9C 00 04 10 01 EC (no inbound callback)
   Z-Wave Debug                    . .  getNodeProtocolInfo:       node 005, class name: Relay Power Switch
   Z-Wave Debug                    . .  getNodeProtocolInfo:            class hierarchy: Routing Slave : Relay Switch : Relay Power Switch (04 : 10 : 01)
   Z-Wave Debug                    . .  getNodeProtocolInfo:         base class command: 25
   Z-Wave Debug                    . .  getNodeProtocolInfo:   supported class commands: 20 25 27
   Z-Wave Debug                    . .  getNodeProtocolInfo:     encrypt class commands:
   Z-Wave Debug                    . .  getNodeProtocolInfo:                   features: routing, beaming
   Z-Wave Debug                    SENT getNodeProtocolInfo: 01 04 00 41 0A B0
   Z-Wave Debug                    RCVD getNodeProtocolInfo: 01 09 01 41 D3 9C 01 04 11 01 EC (no inbound callback)
   Z-Wave Debug                    . .  getNodeProtocolInfo:       node 010, class name: Dimmable Power Switch
   Z-Wave Debug                    . .  getNodeProtocolInfo:            class hierarchy: Routing Slave : Mulitlevel Switch : Dimmable Power Switch (04 : 11 : 01)
   Z-Wave Debug                    . .  getNodeProtocolInfo:         base class command: 26
   Z-Wave Debug                    . .  getNodeProtocolInfo:   supported class commands: 20 26 27
   Z-Wave Debug                    . .  getNodeProtocolInfo:     encrypt class commands:
   Z-Wave Debug                    . .  getNodeProtocolInfo:                   features: routing, beaming
   Z-Wave Debug                    SENT getNodeProtocolInfo: 01 04 00 41 0C B6
   Z-Wave Debug                    RCVD getNodeProtocolInfo: 01 09 01 41 D3 9C 01 04 11 01 EC (no inbound callback)
   Z-Wave Debug                    . .  getNodeProtocolInfo:       node 012, class name: Dimmable Power Switch
   Z-Wave Debug                    . .  getNodeProtocolInfo:            class hierarchy: Routing Slave : Mulitlevel Switch : Dimmable Power Switch (04 : 11 : 01)
   Z-Wave Debug                    . .  getNodeProtocolInfo:         base class command: 26
   Z-Wave Debug                    . .  getNodeProtocolInfo:   supported class commands: 20 26 27
   Z-Wave Debug                    . .  getNodeProtocolInfo:     encrypt class commands:
   Z-Wave Debug                    . .  getNodeProtocolInfo:                   features: routing, beaming
   Z-Wave Debug                    starting node healing thread
   Z-Wave Debug                    starting node status polling thread
   Z-Wave Debug                    SENT enterInclusionMode: 01 04 00 4A 81 30
   Z-Wave Debug                    RCVD enterInclusionMode: 06 (ACK)
   Z-Wave                          started controller inclusion mode
   Z-Wave Debug                    RCVD inclusionMode ready: 01 07 00 4A 01 01 00 00 B2
   Z-Wave Debug                    RCVD inclusionMode node found: 01 07 00 4A 01 02 00 00 B1
   Z-Wave Debug                    RCVD inclusionMode adding slave node: 01 19 00 4A 01 03 0E 12 04 11 01 5E 26 85 59 86 72 55 5A 73 5B 9F 6C 70 22 7A 0A
   Z-Wave Debug                    RCVD inclusionMode node respondCmds: 5E 26 85 59 86 72 55 5A 73 5B 9F 6C 70 22 7A
   Z-Wave Debug                    RCVD inclusionMode node added: 01 07 00 4A 01 05 0E 00 B8
   Z-Wave Debug                    SENT exitInclusionMode: 01 04 00 4A 05 B4
   Z-Wave Debug                    RCVD exitInclusionMode: 06 (ACK)
   Z-Wave Debug                    RCVD inclusionMode finished: 01 07 00 4A 01 06 0E 00 BB
   Z-Wave Debug                    SENT getNodeProtocolInfo: 01 04 00 41 0E B4
   Z-Wave Debug                    RCVD getNodeProtocolInfo: 01 09 01 41 D3 9C 01 04 11 01 EC (no inbound callback)
   Z-Wave Debug                    . .  getNodeProtocolInfo:       node 014, class name: Dimmable Power Switch
   Z-Wave Debug                    . .  getNodeProtocolInfo:            class hierarchy: Routing Slave : Mulitlevel Switch : Dimmable Power Switch (04 : 11 : 01)
   Z-Wave Debug                    . .  getNodeProtocolInfo:         base class command: 26
   Z-Wave Debug                    . .  getNodeProtocolInfo:   supported class commands: 20 26 27 5E 85 59 86 72 55 5A 73 5B 9F 6C 70 22 7A
   Z-Wave Debug                    . .  getNodeProtocolInfo:     encrypt class commands:
   Z-Wave Debug                    . .  getNodeProtocolInfo:                   features: routing, beaming
   Z-Wave                          controller included module: 014 - Dimmable Power Switch
   Z-Wave                          stopped controller inclusion mode

Oct 16, 2022 at 3:19:49 PM
   Z-Wave Debug                    intiatingSyncUI (timeout in 1500 seconds)
   Z-Wave                          Syncing - started for "014 - Dimmable Power Switch"
   Z-Wave Debug                    SENT getNodeNeighbors: 01 06 00 80 0E 01 01 77
   Z-Wave Debug                    RCVD getNodeNeighbors: 01 20 01 80 19 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 45 (no inbound callback)
   Z-Wave Debug                    . .  getNodeNeighbors: nodeId 014, neighbors: 1, 4, 5, 10
   Z-Wave                          Syncing - retrieved module neighbors list: 1, 4, 5, 10
   Z-Wave                          Syncing - assigning return route to "014 - Dimmable Power Switch"
   Z-Wave Debug                    SENT assignReturnRoute: 01 05 00 46 0E 01 B3
   Z-Wave Debug                    RCVD assignReturnRoute: 01 04 01 46 01 BD (no inbound callback)
   Z-Wave Debug                    RCVD assignReturnRoute: 01 05 00 46 01 00 BD
   Z-Wave Debug                    . .  assignReturnRoute: node 014, success 1
   Z-Wave                          Syncing - assigned return route
   Z-Wave Debug                    SENT requestNodeInfo: 01 06 00 60 0E 24 F3 40
   Z-Wave Debug                    RCVD nodeInfoFrame: 01 18 00 49 84 0E 12 04 11 01 5E 26 85 59 86 72 55 5A 73 5B 9F 6C 70 22 7A 8E
   Z-Wave Debug                    . .  nodeInfoFrame: node 014, combined class list: 20v1 26v1 27v1 5Ev1 85v1 59v1 86v1 72v1 55v1 5Av1 73v1 5Bv1 9Fv1 6Cv1 70v1 22v1 7Av1
   Z-Wave Debug                    SENT requestManufactureInfo: 01 09 00 13 0E 02 72 04 25 F4 4E
   Z-Wave Debug                    RCVD requestManufactureInfo: 01 05 00 13 F4 00 1D (node ACK)
   Z-Wave Debug                    RCVD requestManufactureInfo: 01 0E 00 04 00 0E 08 72 05 00 63 49 44 33 39 E0
   Z-Wave Debug                    . .  requestManufactureInfo: node 014, manufacturerId 0063, productId 49443339
   Z-Wave Debug                    . .  requestManufactureInfo: General Electric, Dimmable Power Switch
   Z-Wave                          Syncing - retrieved manufacture and model names: General Electric - 0063, Dimmable Power Switch - 49443339
   Z-Wave Debug                    SENT requestVersInfoGen: 01 09 00 13 0E 02 86 11 25 F5 AE
   Z-Wave Debug                    RCVD requestVersInfoGen: 01 05 00 13 F5 00 1C (node ACK)
   Z-Wave Debug                    RCVD requestVersInfoGen: 01 0F 00 04 00 0E 09 86 12 03 06 04 05 36 FF 00 AA
   Z-Wave Debug                    . .  requestVersInfoGen: node 014, protoVers 6.04, appVers 5.54
   Z-Wave                          Syncing - retrieved protocol version 6.04, app version 5.54
   Z-Wave Debug                    SENT requestVersInfoCmdClass: 01 0A 00 13 0E 03 86 13 26 25 F6 8B
   Z-Wave Debug                    RCVD requestVersInfoCmdClass: 01 05 00 13 F6 00 1F (node ACK)
   Z-Wave Debug                    RCVD requestVersInfoCmdClass: 01 0A 00 04 00 0E 04 86 14 26 04 4B
   Z-Wave Debug                    . .  requestVersInfoCmdClass: node 014, class command 26 using version 4
   Z-Wave Debug                    . .  requestVersInfoCmdClass: node 014, combined class list: 20v1 26v4 27v1 5Ev1 85v1 59v1 86v1 72v1 55v1 5Av1 73v1 5Bv1 9Fv1 6Cv1 70v1 22v1 7Av1
   Z-Wave                          Syncing - retrieved class hierarchy: Routing Slave : Mulitlevel Switch : Dimmable Power Switch (04 : 11 : 01, base 26)
   Z-Wave                          Syncing - retrieved command classes: 20v1 26v4 27v1 5Ev1 85v1 59v1 86v1 72v1 55v1 5Av1 73v1 5Bv1 9Fv1 6Cv1 70v1 22v1 7Av1
   Z-Wave                          Syncing - retrieved encrypt commands: - none -
   Z-Wave                          Syncing - retrieved capabilities: routing, beaming
   Z-Wave Debug                    SENT requestAssociationGroupCount: 01 09 00 13 0E 02 85 05 25 F7 BB
   Z-Wave Debug                    RCVD requestAssociationGroupCount: 01 05 00 13 F7 00 1E (node ACK)
   Z-Wave Debug                    RCVD requestAssociationGroupCount: 01 09 00 04 00 0E 03 85 06 03 7F
   Z-Wave Debug                    . .  requestAssociationGroupCount: node 014, group count: 3
   Z-Wave Debug                    SENT requestAssociations: 01 0A 00 13 0E 03 85 02 01 25 F8 B0
   Z-Wave Debug                    RCVD requestAssociations: 01 05 00 13 F8 00 11 (node ACK)
   Z-Wave Debug                    RCVD requestAssociations: 01 0B 00 04 00 0E 05 85 03 01 05 00 79
   Z-Wave Debug                    . .  requestAssociations: node 014, group: 1, num associations: 0, max associations: 5, replies left: 0
   Z-Wave Debug                    . .  requestAssociations: node 014, group: 1, associations: []
   Z-Wave                          Syncing - retrieved group 1 associations: []
   Z-Wave Debug                    SENT requestAssociations: 01 0A 00 13 0E 03 85 02 02 25 F9 B2
   Z-Wave Debug                    RCVD requestAssociations: 01 05 00 13 F9 00 10 (node ACK)
   Z-Wave Debug                    RCVD requestAssociations: 01 0B 00 04 00 0E 05 85 03 02 05 00 7A
   Z-Wave Debug                    . .  requestAssociations: node 014, group: 2, num associations: 0, max associations: 5, replies left: 0
   Z-Wave Debug                    . .  requestAssociations: node 014, group: 2, associations: []
   Z-Wave                          Syncing - retrieved group 2 associations: []
   Z-Wave Debug                    SENT requestAssociations: 01 0A 00 13 0E 03 85 02 03 25 FA B0
   Z-Wave Debug                    RCVD requestAssociations: 01 05 00 13 FA 00 13 (node ACK)
   Z-Wave Debug                    RCVD requestAssociations: 01 0B 00 04 00 0E 05 85 03 03 05 00 7B
   Z-Wave Debug                    . .  requestAssociations: node 014, group: 3, num associations: 0, max associations: 5, replies left: 0
   Z-Wave Debug                    . .  requestAssociations: node 014, group: 3, associations: []
   Z-Wave                          Syncing - retrieved group 3 associations: []
   Z-Wave Debug                    SENT addInterfaceAssociation: 01 0B 00 13 0E 04 85 01 01 01 25 FB B7
   Z-Wave Debug                    RCVD addInterfaceAssociation: 01 05 00 13 FB 00 12 (node ACK)
   Z-Wave                          Syncing - added group 1 association to interface
   Z-Wave Debug                    . .  addInterfaceAssociation: node 014, group: 1, associations: [1]
   Z-Wave                          Syncing - created device "014 - Dimmable Power Switch"
   Z-Wave                          Syncing - complete
   Z-Wave Debug                    terminatingSyncUI