Outdoor Motion Sensor (ZSE29) doesn't report luminance

Zooz Outdoor Motion Sensor (ZSE29), firmware 2.01.

Does Indigo support that feature?

[matt (support)]

When we added it I don't believe it supported luminance – I think that was added in the v2 firmware for the sensor.. Can you re-sync it and copy/paste the Event Log results so we can see what specifically your version is reporting?

Code: Select all

Syncing - started for "Garden Sensor"
   Z-Wave                          Syncing - retrieved module neighbors list: 2, 3, 4, 5, 11, 14, 15, 22
   Z-Wave                          Syncing - assigning return route to "046 - Garden Sensor"
   Z-Wave                          Syncing - assigned return route
   Z-Wave                          Syncing - retrieved manufacture and model names: Zooz - 027A, Outdoor Motion Sensor (ZSE29) - 00010005
   Z-Wave                          Syncing - retrieved protocol version 4.61, app version 2.01
   Z-Wave                          Syncing - retrieved class hierarchy: Routing Slave : Notification Sensor : Notification Sensor (04 : 07 : 01, base 00)
   Z-Wave                          Syncing - retrieved command classes: 80v1 84v2 85v1 86v1 55v1 98v1 59v1 5Av1 5Ev1 9Fv1 20v1 71v1 6Cv1 70v1 31v5 72v1 73v1 7Av1
   Z-Wave                          Syncing - retrieved encrypt commands: - none -
   Z-Wave                          Syncing - retrieved capabilities: routing, battery, beaming, security, waking
   Z-Wave                          Syncing - retrieved wake interval of 60 minutes
   Z-Wave                          Syncing - device "046 - Garden Sensor" wake interval changed to 60 minutes
   Z-Wave                          Syncing - retrieved group 1 associations: [1]
   Z-Wave                          Syncing - retrieved group 2 associations: []
   Z-Wave                          Syncing - group 1 association to interface already exists (skipping)
   Z-Wave                          Syncing - retrieved battery level of 100%

Is that all you need?

[matt (support)]

Yes, we'll work on getting that sensor added to the device definition.

[matt (support)]

Indigo 2021.1.1 is now available and adds light sensor support for the Zooz Outdoor Motion Sensor (ZSE29)