I had to replace the battery in this device (the 3rd time since I have it) and and now (even after a resync) the sensor doesn't show the actual (new) battery level.
The battery is new, but the device still shows the level of the "old" battery.
Never had teh issue before,
What to do? A resync didn't helped. Delete the device?
Yassi
Fibaro smoke sensor FGSD002 doesn't update battery status
- yassi offline
- Posts: 468
- Joined: Sep 06, 2015
- Location: Germany
Fibaro smoke sensor FGSD002 doesn't update battery status
- Attachments
-
- Bildschirmfoto 2020-05-21 um 21.29.02.png (25.01 KiB) Viewed 2241 times
- matt (support) offline
- Site Admin
-
- Posts: 21417
- Joined: Jan 27, 2003
- Location: Texas
Re: Fibaro smoke sensor FGSD002 doesn't update battery statu
Give it 24 hours and it should update.
- yassi offline
- Posts: 468
- Joined: Sep 06, 2015
- Location: Germany
Re: Fibaro smoke sensor FGSD002 doesn't update battery statu
matt (support) wrote:It didn‘t, Matt. The new battery is since a few days in.Give it 24 hours and it should update.
Gesendet von iPhone mit Tapatalk
- matt (support) offline
- Site Admin
-
- Posts: 21417
- Joined: Jan 27, 2003
- Location: Texas
Re: Fibaro smoke sensor FGSD002 doesn't update battery statu
In the settings dialog what is the Wake Interval set to?
- yassi offline
- Posts: 468
- Joined: Sep 06, 2015
- Location: Germany
Re: Fibaro smoke sensor FGSD002 doesn't update battery statu
matt (support) wrote:At the moment I think 30 minutes. To test it I’ve also lowered the interval to 5 mins too, but it did’ t make any difference.In the settings dialog what is the Wake Interval set to?
Gesendet von iPhone mit Tapatalk
- matt (support) offline
- Site Admin
-
- Posts: 21417
- Joined: Jan 27, 2003
- Location: Texas
Re: Fibaro smoke sensor FGSD002 doesn't update battery statu
Enable Indigo's Z-Wave Debug Logging checkbox (via the Interfaces->Z-Wave->Configure... menu item), change the wake interval to 5 minutes, then restart the Z-Wave interfaces (via the menu). Let that run for 30 minutes or so (several wake intervals), then copy/paste the Event Log results (or email them to us) and we'll see what is occurring when the module wakes. It is important you restart the Z-Wave interface as that will reset Indigo's built-in battery level checking throttle so it should poll out the battery level the next time the module wakes (and now wait until 12 hours have past).
- yassi offline
- Posts: 468
- Joined: Sep 06, 2015
- Location: Germany
Re: Fibaro smoke sensor FGSD002 doesn't update battery statu
matt (support) wrote:Ok, thanks, Matt, I will try this tomorrow and post/send the logs.Enable Indigo's Z-Wave Debug Logging checkbox (via the Interfaces->Z-Wave->Configure... menu item), change the wake interval to 5 minutes, then restart the Z-Wave interfaces (via the menu). Let that run for 30 minutes or so (several wake intervals), then copy/paste the Event Log results (or email them to us) and we'll see what is occurring when the module wakes. It is important you restart the Z-Wave interface as that will reset Indigo's built-in battery level checking throttle so it should poll out the battery level the next time the module wakes (and now wait until 12 hours have past).
Gesendet von iPhone mit Tapatalk
- yassi offline
- Posts: 468
- Joined: Sep 06, 2015
- Location: Germany
Re: Fibaro smoke sensor FGSD002 doesn't update battery statu
Hi Matt, here we go.
Debug was on for about a half hour, afterwards, I've switched it off and reloaded the interface, hope that's fine so.
P.S. I've removed my public IP-adress in the log.
Thanks in advance!
Yassi
Debug was on for about a half hour, afterwards, I've switched it off and reloaded the interface, hope that's fine so.
- Code: Select all
23. May 2020 at 19:54:51
Z-Wave Debug stopping node healing thread
Z-Wave Debug stopping node status polling thread
Z-Wave Debug stopped zwave packet parser thread
Z-Wave connection reset requested
Z-Wave Debug starting serial connection loop
Z-Wave Debug starting zwave packet parser thread
Z-Wave Debug SENT getVersion: 01 03 00 15 E9
Z-Wave Debug RCVD getVersion: 01 10 01 15 5A 2D 57 61 76 65 20 33 2E 39 35 00 01 99 (no inbound callback)
Z-Wave Debug . . getVersion: Z-Wave 3.95 static controller
Z-Wave Debug SENT getHomeID: 01 03 00 20 DC
Z-Wave Debug RCVD getHomeID: 01 08 01 20 C6 10 9A 67 01 FC (no inbound callback)
Z-Wave Debug . . getHomeID: C6109A67, nodeID: 001
Z-Wave Debug SENT getInterfaceFeatures: 01 03 00 05 F9
Z-Wave Debug RCVD getInterfaceFeatures: 01 04 01 05 18 E7 (no inbound callback)
Z-Wave Debug . . getInterfaceFeatures: 18
Z-Wave Debug SENT getInterfaceApiCapabilities: 01 03 00 07 FB
Z-Wave Debug RCVD getInterfaceApiCapabilities: 01 2B 01 07 01 00 00 86 00 01 00 5A FE 81 FF 88 4F 1F 00 00 FB 9F 7D A0 67 00 00 80 00 80 86 00 00 00 E8 73 00 00 0E 00 00 60 00 00 FB (no inbound callback)
Z-Wave Debug . . getInterfaceApiCapabilities: supportedFuncIDs: 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 1C 20 21 22 23 24 27 29 2A 2B 2C 2D 41 42 44 45 46 47 48 49 4A 4B 4C 4D 50 51 53 54 55 56 57 5E 60 61 62 63 66 67 80 90 92 93 98 B4 B6 B7 B8 B9 BA BD BE BF D2 D3 D4 EE EF
Z-Wave Debug . . getInterfaceApiCapabilities: serialApi 1.00, manufactureId 0086, productType 0001, productId 005A
Z-Wave connected to Z-Stick interface on /dev/cu.usbmodem471 (firmware 1.00)
Z-Wave Debug SENT forceSUC: 01 05 00 54 01 01 AE
Z-Wave Debug RCVD forceSUC: 01 04 01 54 01 AF (no inbound callback)
Z-Wave Debug SENT getInitialNodeData: 01 03 00 02 FE
Z-Wave Debug RCVD getInitialNodeData: 01 25 01 02 05 08 1D FF 0F 39 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 05 00 05 (no inbound callback)
Z-Wave Debug . . getInitialNodeData: is static update controller
Z-Wave Debug . . getInitialNodeData: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 17, 20, 21, 22]
Z-Wave Debug SENT getNodeProtocolInfo: 01 04 00 41 01 BB
Z-Wave Debug RCVD getNodeProtocolInfo: 01 09 01 41 93 16 01 02 02 01 33 (no inbound callback)
Z-Wave Debug . . getNodeProtocolInfo: node 001, class name: Static Computer Controller
Z-Wave Debug . . getNodeProtocolInfo: class hierarchy: Static Controller : Static Controller : Static Computer Controller (02 : 02 : 01)
Z-Wave Debug . . getNodeProtocolInfo: base class command: 00
Z-Wave Debug . . getNodeProtocolInfo: supported class commands: 20
Z-Wave Debug . . getNodeProtocolInfo: encrypt class commands:
Z-Wave Debug . . getNodeProtocolInfo: features: beaming
Z-Wave Debug SENT getNodeProtocolInfo: 01 04 00 41 02 B8
Z-Wave Debug RCVD getNodeProtocolInfo: 01 09 01 41 53 9C 00 04 20 01 5C (no inbound callback)
Z-Wave Debug . . getNodeProtocolInfo: node 002, class name: Binary Sensor (routing)
Z-Wave Debug . . getNodeProtocolInfo: class hierarchy: Routing Slave : Binary Sensor : Binary Sensor (routing) (04 : 20 : 01)
Z-Wave Debug . . getNodeProtocolInfo: base class command: 30
Z-Wave Debug . . getNodeProtocolInfo: supported class commands: 20 30
Z-Wave Debug . . getNodeProtocolInfo: encrypt class commands:
Z-Wave Debug . . getNodeProtocolInfo: features: routing, beaming
Z-Wave Debug SENT getNodeProtocolInfo: 01 04 00 41 03 B9
Z-Wave Debug RCVD getNodeProtocolInfo: 01 09 01 41 53 9C 01 04 07 01 7A (no inbound callback)
Z-Wave Debug . . getNodeProtocolInfo: node 003, class name: Notification Sensor
Z-Wave Debug . . getNodeProtocolInfo: class hierarchy: Routing Slave : Notification Sensor : Notification Sensor (04 : 07 : 01)
Z-Wave Debug . . getNodeProtocolInfo: base class command: 00
Z-Wave Debug . . getNodeProtocolInfo: supported class commands: 20
Z-Wave Debug . . getNodeProtocolInfo: encrypt class commands:
Z-Wave Debug . . getNodeProtocolInfo: features: routing, beaming
Z-Wave Debug SENT getNodeProtocolInfo: 01 04 00 41 04 BE
Z-Wave Debug RCVD getNodeProtocolInfo: 01 09 01 41 D3 9C 00 04 11 01 ED (no inbound callback)
Z-Wave Debug . . getNodeProtocolInfo: node 004, class name: Dimmable Power Switch
Z-Wave Debug . . getNodeProtocolInfo: class hierarchy: Routing Slave : Mulitlevel Switch : Dimmable Power Switch (04 : 11 : 01)
Z-Wave Debug . . getNodeProtocolInfo: base class command: 26
Z-Wave Debug . . getNodeProtocolInfo: supported class commands: 20 26 27
Z-Wave Debug . . getNodeProtocolInfo: encrypt class commands:
Z-Wave Debug . . getNodeProtocolInfo: features: routing, beaming
Z-Wave Debug overriding node 004 type from zwDimmerType to zwColorDimmerType
Z-Wave Debug SENT getNodeProtocolInfo: 01 04 00 41 05 BF
Z-Wave Debug RCVD getNodeProtocolInfo: 01 09 01 41 53 9C 00 04 A1 02 DE (no inbound callback)
Z-Wave Debug . . getNodeProtocolInfo: node 005, class name: Alarm Sensor (routing)
Z-Wave Debug . . getNodeProtocolInfo: class hierarchy: Routing Slave : Sensor Alarm : Alarm Sensor (routing) (04 : A1 : 02)
Z-Wave Debug . . getNodeProtocolInfo: base class command: 71
Z-Wave Debug . . getNodeProtocolInfo: supported class commands: 20 80 85 86 71 72
Z-Wave Debug . . getNodeProtocolInfo: encrypt class commands:
Z-Wave Debug . . getNodeProtocolInfo: features: routing, battery, beaming
Z-Wave Debug overriding node 005 type from zwCustomType to zwOnOffSensorType
Z-Wave Debug SENT getNodeProtocolInfo: 01 04 00 41 06 BC
Z-Wave Debug RCVD getNodeProtocolInfo: 01 09 01 41 53 5C 00 04 10 00 AD (no inbound callback)
Z-Wave Debug . . getNodeProtocolInfo: node 006, class name: Relay Switch
Z-Wave Debug . . getNodeProtocolInfo: class hierarchy: Routing Slave : Relay Switch : -- (04 : 10 : 00)
Z-Wave Debug . . getNodeProtocolInfo: base class command: 25
Z-Wave Debug . . getNodeProtocolInfo: supported class commands: 20 25
Z-Wave Debug . . getNodeProtocolInfo: encrypt class commands:
Z-Wave Debug . . getNodeProtocolInfo: features: routing, beaming, frequentWaking
Z-Wave Debug stopped polling of "006 - Sirene"
Z-Wave Debug started polling of "006 - Sirene" approx every 3600 seconds
Z-Wave Debug SENT getNodeProtocolInfo: 01 04 00 41 07 BD
Z-Wave Debug RCVD getNodeProtocolInfo: 01 09 01 41 13 96 01 01 01 01 33 (no inbound callback)
Z-Wave Debug . . getNodeProtocolInfo: node 007, class name: Portable Remote Controller
Z-Wave Debug . . getNodeProtocolInfo: class hierarchy: Controller : Portable Controller : Portable Remote Controller (01 : 01 : 01)
Z-Wave Debug . . getNodeProtocolInfo: base class command: 00
Z-Wave Debug . . getNodeProtocolInfo: supported class commands: 20
Z-Wave Debug . . getNodeProtocolInfo: encrypt class commands:
Z-Wave Debug . . getNodeProtocolInfo: features: beaming
Z-Wave Debug SENT getNodeProtocolInfo: 01 04 00 41 08 B2
Z-Wave Debug RCVD getNodeProtocolInfo: 01 09 01 41 52 9C 00 04 A1 07 DA (no inbound callback)
Z-Wave Debug . . getNodeProtocolInfo: node 008, class name: Smoke Sensor (routing)
Z-Wave Debug . . getNodeProtocolInfo: class hierarchy: Routing Slave : Sensor Alarm : Smoke Sensor (routing) (04 : A1 : 07)
Z-Wave Debug . . getNodeProtocolInfo: base class command: 71
Z-Wave Debug . . getNodeProtocolInfo: supported class commands: 20 80 85 86 71 72
Z-Wave Debug . . getNodeProtocolInfo: encrypt class commands:
Z-Wave Debug . . getNodeProtocolInfo: features: routing, battery, beaming
Z-Wave Debug overriding node 008 type from zwCustomType to zwOnOffSensorType
Z-Wave Debug SENT getNodeProtocolInfo: 01 04 00 41 09 B3
Z-Wave Debug RCVD getNodeProtocolInfo: 01 09 01 41 52 9C 00 04 A1 07 DA (no inbound callback)
Z-Wave Debug . . getNodeProtocolInfo: node 009, class name: Smoke Sensor (routing)
Z-Wave Debug . . getNodeProtocolInfo: class hierarchy: Routing Slave : Sensor Alarm : Smoke Sensor (routing) (04 : A1 : 07)
Z-Wave Debug . . getNodeProtocolInfo: base class command: 71
Z-Wave Debug . . getNodeProtocolInfo: supported class commands: 20 80 85 86 71 72
Z-Wave Debug . . getNodeProtocolInfo: encrypt class commands:
Z-Wave Debug . . getNodeProtocolInfo: features: routing, battery, beaming
Z-Wave Debug overriding node 009 type from zwCustomType to zwOnOffSensorType
Z-Wave Debug SENT getNodeProtocolInfo: 01 04 00 41 0A B0
Z-Wave Debug RCVD getNodeProtocolInfo: 01 09 01 41 D3 9C 00 04 10 01 EC (no inbound callback)
Z-Wave Debug . . getNodeProtocolInfo: node 010, class name: Relay Power Switch
Z-Wave Debug . . getNodeProtocolInfo: class hierarchy: Routing Slave : Relay Switch : Relay Power Switch (04 : 10 : 01)
Z-Wave Debug . . getNodeProtocolInfo: base class command: 25
Z-Wave Debug . . getNodeProtocolInfo: supported class commands: 20 25 27
Z-Wave Debug . . getNodeProtocolInfo: encrypt class commands:
Z-Wave Debug . . getNodeProtocolInfo: features: routing, beaming
Z-Wave Debug stopped polling of "010 - HiFi-Anlage"
Z-Wave Debug started polling of "010 - HiFi-Anlage" approx every 3600 seconds
Z-Wave Debug SENT getNodeProtocolInfo: 01 04 00 41 0B B1
Z-Wave Debug RCVD getNodeProtocolInfo: 01 09 01 41 D3 9C 01 04 10 01 ED (no inbound callback)
Z-Wave Debug . . getNodeProtocolInfo: node 011, class name: Relay Power Switch
Z-Wave Debug . . getNodeProtocolInfo: class hierarchy: Routing Slave : Relay Switch : Relay Power Switch (04 : 10 : 01)
Z-Wave Debug . . getNodeProtocolInfo: base class command: 25
Z-Wave Debug . . getNodeProtocolInfo: supported class commands: 20 25 27
Z-Wave Debug . . getNodeProtocolInfo: encrypt class commands:
Z-Wave Debug . . getNodeProtocolInfo: features: routing, beaming
Z-Wave Debug stopped polling of "011 - Router"
Z-Wave Debug started polling of "011 - Router" approx every 3600 seconds
Z-Wave Debug SENT getNodeProtocolInfo: 01 04 00 41 0C B6
Z-Wave Debug RCVD getNodeProtocolInfo: 01 09 01 41 53 9C 00 04 08 06 73 (no inbound callback)
Z-Wave Debug . . getNodeProtocolInfo: node 012, class name: General Thermostat (v2)
Z-Wave Debug . . getNodeProtocolInfo: class hierarchy: Routing Slave : Thermostat : General Thermostat (v2) (04 : 08 : 06)
Z-Wave Debug . . getNodeProtocolInfo: base class command: 40
Z-Wave Debug . . getNodeProtocolInfo: supported class commands: 20 40 72 43 86
Z-Wave Debug . . getNodeProtocolInfo: encrypt class commands:
Z-Wave Debug . . getNodeProtocolInfo: features: routing, beaming
Z-Wave found module included in controller with no matching device (missing or disabled): 012 - General Thermostat (v2)
Z-Wave Debug SENT getNodeProtocolInfo: 01 04 00 41 11 AB
Z-Wave Debug RCVD getNodeProtocolInfo: 01 09 01 41 53 9C 00 04 08 06 73 (no inbound callback)
Z-Wave Debug . . getNodeProtocolInfo: node 017, class name: General Thermostat (v2)
Z-Wave Debug . . getNodeProtocolInfo: class hierarchy: Routing Slave : Thermostat : General Thermostat (v2) (04 : 08 : 06)
Z-Wave Debug . . getNodeProtocolInfo: base class command: 40
Z-Wave Debug . . getNodeProtocolInfo: supported class commands: 20 40 72 43 86
Z-Wave Debug . . getNodeProtocolInfo: encrypt class commands:
Z-Wave Debug . . getNodeProtocolInfo: features: routing, beaming
Z-Wave found module included in controller with no matching device (missing or disabled): 017 - General Thermostat (v2)
Z-Wave Debug SENT getNodeProtocolInfo: 01 04 00 41 14 AE
Z-Wave Debug RCVD getNodeProtocolInfo: 01 09 01 41 13 96 01 01 01 06 34 (no inbound callback)
Z-Wave Debug . . getNodeProtocolInfo: node 020, class name: Remote Control Simple
Z-Wave Debug . . getNodeProtocolInfo: class hierarchy: Controller : Portable Controller : Remote Control Simple (01 : 01 : 06)
Z-Wave Debug . . getNodeProtocolInfo: base class command: 00
Z-Wave Debug . . getNodeProtocolInfo: supported class commands: 20
Z-Wave Debug . . getNodeProtocolInfo: encrypt class commands:
Z-Wave Debug . . getNodeProtocolInfo: features: beaming
Z-Wave Debug SENT getNodeProtocolInfo: 01 04 00 41 15 AF
Z-Wave Debug RCVD getNodeProtocolInfo: 01 09 01 41 D3 9C 01 04 10 01 ED (no inbound callback)
Z-Wave Debug . . getNodeProtocolInfo: node 021, class name: Relay Power Switch
Z-Wave Debug . . getNodeProtocolInfo: class hierarchy: Routing Slave : Relay Switch : Relay Power Switch (04 : 10 : 01)
Z-Wave Debug . . getNodeProtocolInfo: base class command: 25
Z-Wave Debug . . getNodeProtocolInfo: supported class commands: 20 25 27
Z-Wave Debug . . getNodeProtocolInfo: encrypt class commands:
Z-Wave Debug . . getNodeProtocolInfo: features: routing, beaming
Z-Wave Debug SENT getNodeProtocolInfo: 01 04 00 41 16 AC
Z-Wave Debug RCVD getNodeProtocolInfo: 01 09 01 41 53 9C 01 04 07 01 7A (no inbound callback)
Z-Wave Debug . . getNodeProtocolInfo: node 022, class name: Notification Sensor
Z-Wave Debug . . getNodeProtocolInfo: class hierarchy: Routing Slave : Notification Sensor : Notification Sensor (04 : 07 : 01)
Z-Wave Debug . . getNodeProtocolInfo: base class command: 00
Z-Wave Debug . . getNodeProtocolInfo: supported class commands: 20
Z-Wave Debug . . getNodeProtocolInfo: encrypt class commands:
Z-Wave Debug . . getNodeProtocolInfo: features: routing, beaming
Z-Wave Debug starting node healing thread
Z-Wave Debug starting node status polling thread
Z-Wave Debug validating parm 001, userVal 2, curVal 2, stateless False, writeonly False
Z-Wave Debug validating parm 003, userVal 7, curVal 7, stateless False, writeonly False
Z-Wave Debug validating parm 004, userVal 7, curVal 7, stateless False, writeonly False
Z-Wave Debug validating parm 020, userVal 1, curVal 1, stateless False, writeonly False
Z-Wave Debug validating parm 021, userVal 10, curVal 10, stateless False, writeonly False
Z-Wave Debug validating parm 030, userVal 55, curVal 55, stateless False, writeonly False
Z-Wave Debug validating parm 031, userVal 1, curVal 1, stateless False, writeonly False
Z-Wave Debug SENT setWakeInterval: 01 0D 00 13 16 06 84 04 00 01 2C 01 25 E1 99
Online Sensor "Public IP-address" new IP Address: X.X.X.X
Reloading interface "Z-Wave 7.4.1"
Stopping interface "Z-Wave 7.4.1" (pid 7058)
Z-Wave Debug stopping node status polling thread
Z-Wave Debug stopping node healing thread
Z-Wave Debug stopped zwave packet parser thread
Z-Wave closed connection to Z-Stick
Z-Wave Debug stopped polling of "010 - HiFi-Anlage"
Z-Wave Debug stopped polling of "011 - Router"
Z-Wave Debug stopped polling of "006 - Sirene"
Stopped interface "Z-Wave 7.4.1"
Starting interface "Z-Wave 7.4.1" (pid 79146)
Started interface "Z-Wave 7.4.1"
Z-Wave Debug starting serial connection loop
Z-Wave Debug starting zwave packet parser thread
Z-Wave Debug SENT getVersion: 01 03 00 15 E9
Z-Wave Debug RCVD getVersion: 01 10 01 15 5A 2D 57 61 76 65 20 33 2E 39 35 00 01 99 (no inbound callback)
Z-Wave Debug . . getVersion: Z-Wave 3.95 static controller
Z-Wave Debug SENT getHomeID: 01 03 00 20 DC
Z-Wave Debug RCVD getHomeID: 01 08 01 20 C6 10 9A 67 01 FC (no inbound callback)
Z-Wave Debug . . getHomeID: C6109A67, nodeID: 001
Z-Wave Debug SENT getInterfaceFeatures: 01 03 00 05 F9
Z-Wave Debug RCVD getInterfaceFeatures: 01 04 01 05 18 E7 (no inbound callback)
Z-Wave Debug . . getInterfaceFeatures: 18
Z-Wave Debug SENT getInterfaceApiCapabilities: 01 03 00 07 FB
Z-Wave Debug RCVD getInterfaceApiCapabilities: 01 2B 01 07 01 00 00 86 00 01 00 5A FE 81 FF 88 4F 1F 00 00 FB 9F 7D A0 67 00 00 80 00 80 86 00 00 00 E8 73 00 00 0E 00 00 60 00 00 FB (no inbound callback)
Z-Wave Debug . . getInterfaceApiCapabilities: supportedFuncIDs: 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 1C 20 21 22 23 24 27 29 2A 2B 2C 2D 41 42 44 45 46 47 48 49 4A 4B 4C 4D 50 51 53 54 55 56 57 5E 60 61 62 63 66 67 80 90 92 93 98 B4 B6 B7 B8 B9 BA BD BE BF D2 D3 D4 EE EF
Z-Wave Debug . . getInterfaceApiCapabilities: serialApi 1.00, manufactureId 0086, productType 0001, productId 005A
Z-Wave connected to Z-Stick interface on /dev/cu.usbmodem471 (firmware 1.00)
Z-Wave Debug SENT forceSUC: 01 05 00 54 01 01 AE
Z-Wave Debug RCVD forceSUC: 01 04 01 54 01 AF (no inbound callback)
Z-Wave Debug SENT getInitialNodeData: 01 03 00 02 FE
Z-Wave Debug RCVD getInitialNodeData: 01 25 01 02 05 08 1D FF 0F 39 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 05 00 05 (no inbound callback)
Z-Wave Debug . . getInitialNodeData: is static update controller
Z-Wave Debug . . getInitialNodeData: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 17, 20, 21, 22]
Z-Wave Debug SENT getNodeProtocolInfo: 01 04 00 41 01 BB
Z-Wave Debug RCVD getNodeProtocolInfo: 01 09 01 41 93 16 01 02 02 01 33 (no inbound callback)
Z-Wave Debug . . getNodeProtocolInfo: requeuing 1 unsolicited packets
Z-Wave Debug . . getNodeProtocolInfo: node 001, class name: Static Computer Controller
Z-Wave Debug . . getNodeProtocolInfo: class hierarchy: Static Controller : Static Controller : Static Computer Controller (02 : 02 : 01)
Z-Wave Debug . . getNodeProtocolInfo: base class command: 00
Z-Wave Debug . . getNodeProtocolInfo: supported class commands: 20
Z-Wave Debug . . getNodeProtocolInfo: encrypt class commands:
Z-Wave Debug . . getNodeProtocolInfo: features: beaming
Z-Wave Debug SENT getNodeProtocolInfo: 01 04 00 41 02 B8
Z-Wave Debug RCVD getNodeProtocolInfo: 01 09 01 41 53 9C 00 04 20 01 5C (no inbound callback)
Z-Wave Debug . . getNodeProtocolInfo: requeuing 1 unsolicited packets
Z-Wave Debug . . getNodeProtocolInfo: node 002, class name: Binary Sensor (routing)
Z-Wave Debug . . getNodeProtocolInfo: class hierarchy: Routing Slave : Binary Sensor : Binary Sensor (routing) (04 : 20 : 01)
Z-Wave Debug . . getNodeProtocolInfo: base class command: 30
Z-Wave Debug . . getNodeProtocolInfo: supported class commands: 20 30
Z-Wave Debug . . getNodeProtocolInfo: encrypt class commands:
Z-Wave Debug . . getNodeProtocolInfo: features: routing, beaming
Z-Wave Debug SENT getNodeProtocolInfo: 01 04 00 41 03 B9
Z-Wave Debug RCVD getNodeProtocolInfo: 01 09 01 41 53 9C 01 04 07 01 7A (no inbound callback)
Z-Wave Debug . . getNodeProtocolInfo: requeuing 1 unsolicited packets
Z-Wave Debug . . getNodeProtocolInfo: node 003, class name: Notification Sensor
Z-Wave Debug . . getNodeProtocolInfo: class hierarchy: Routing Slave : Notification Sensor : Notification Sensor (04 : 07 : 01)
Z-Wave Debug . . getNodeProtocolInfo: base class command: 00
Z-Wave Debug . . getNodeProtocolInfo: supported class commands: 20
Z-Wave Debug . . getNodeProtocolInfo: encrypt class commands:
Z-Wave Debug . . getNodeProtocolInfo: features: routing, beaming
Z-Wave Debug SENT getNodeProtocolInfo: 01 04 00 41 04 BE
Z-Wave Debug RCVD getNodeProtocolInfo: 01 09 01 41 D3 9C 00 04 11 01 ED (no inbound callback)
Z-Wave Debug . . getNodeProtocolInfo: requeuing 1 unsolicited packets
Z-Wave Debug . . getNodeProtocolInfo: node 004, class name: Dimmable Power Switch
Z-Wave Debug . . getNodeProtocolInfo: class hierarchy: Routing Slave : Mulitlevel Switch : Dimmable Power Switch (04 : 11 : 01)
Z-Wave Debug . . getNodeProtocolInfo: base class command: 26
Z-Wave Debug . . getNodeProtocolInfo: supported class commands: 20 26 27
Z-Wave Debug . . getNodeProtocolInfo: encrypt class commands:
Z-Wave Debug . . getNodeProtocolInfo: features: routing, beaming
Z-Wave Debug overriding node 004 type from zwDimmerType to zwColorDimmerType
Z-Wave Debug SENT getNodeProtocolInfo: 01 04 00 41 05 BF
Z-Wave Debug RCVD getNodeProtocolInfo: 01 09 01 41 53 9C 00 04 A1 02 DE (no inbound callback)
Z-Wave Debug . . getNodeProtocolInfo: requeuing 1 unsolicited packets
Z-Wave Debug . . getNodeProtocolInfo: node 005, class name: Alarm Sensor (routing)
Z-Wave Debug . . getNodeProtocolInfo: class hierarchy: Routing Slave : Sensor Alarm : Alarm Sensor (routing) (04 : A1 : 02)
Z-Wave Debug . . getNodeProtocolInfo: base class command: 71
Z-Wave Debug . . getNodeProtocolInfo: supported class commands: 20 80 85 86 71 72
Z-Wave Debug . . getNodeProtocolInfo: encrypt class commands:
Z-Wave Debug . . getNodeProtocolInfo: features: routing, battery, beaming
Z-Wave Debug overriding node 005 type from zwCustomType to zwOnOffSensorType
Z-Wave Debug SENT getNodeProtocolInfo: 01 04 00 41 06 BC
Z-Wave Debug RCVD getNodeProtocolInfo: 01 09 01 41 53 5C 00 04 10 00 AD (no inbound callback)
Z-Wave Debug . . getNodeProtocolInfo: requeuing 1 unsolicited packets
Z-Wave Debug . . getNodeProtocolInfo: node 006, class name: Relay Switch
Z-Wave Debug . . getNodeProtocolInfo: class hierarchy: Routing Slave : Relay Switch : -- (04 : 10 : 00)
Z-Wave Debug . . getNodeProtocolInfo: base class command: 25
Z-Wave Debug . . getNodeProtocolInfo: supported class commands: 20 25
Z-Wave Debug . . getNodeProtocolInfo: encrypt class commands:
Z-Wave Debug . . getNodeProtocolInfo: features: routing, beaming, frequentWaking
Z-Wave Debug started polling of "006 - Sirene" approx every 3600 seconds
Z-Wave Debug SENT getNodeProtocolInfo: 01 04 00 41 07 BD
Z-Wave Debug RCVD getNodeProtocolInfo: 01 09 01 41 13 96 01 01 01 01 33 (no inbound callback)
Z-Wave Debug . . getNodeProtocolInfo: requeuing 1 unsolicited packets
Z-Wave Debug . . getNodeProtocolInfo: node 007, class name: Portable Remote Controller
Z-Wave Debug . . getNodeProtocolInfo: class hierarchy: Controller : Portable Controller : Portable Remote Controller (01 : 01 : 01)
Z-Wave Debug . . getNodeProtocolInfo: base class command: 00
Z-Wave Debug . . getNodeProtocolInfo: supported class commands: 20
Z-Wave Debug . . getNodeProtocolInfo: encrypt class commands:
Z-Wave Debug . . getNodeProtocolInfo: features: beaming
Z-Wave Debug SENT getNodeProtocolInfo: 01 04 00 41 08 B2
Z-Wave Debug RCVD getNodeProtocolInfo: 01 09 01 41 52 9C 00 04 A1 07 DA (no inbound callback)
Z-Wave Debug . . getNodeProtocolInfo: requeuing 1 unsolicited packets
Z-Wave Debug . . getNodeProtocolInfo: node 008, class name: Smoke Sensor (routing)
Z-Wave Debug . . getNodeProtocolInfo: class hierarchy: Routing Slave : Sensor Alarm : Smoke Sensor (routing) (04 : A1 : 07)
Z-Wave Debug . . getNodeProtocolInfo: base class command: 71
Z-Wave Debug . . getNodeProtocolInfo: supported class commands: 20 80 85 86 71 72
Z-Wave Debug . . getNodeProtocolInfo: encrypt class commands:
Z-Wave Debug . . getNodeProtocolInfo: features: routing, battery, beaming
Z-Wave Debug overriding node 008 type from zwCustomType to zwOnOffSensorType
Z-Wave Debug SENT getNodeProtocolInfo: 01 04 00 41 09 B3
Z-Wave Debug RCVD getNodeProtocolInfo: 01 09 01 41 52 9C 00 04 A1 07 DA (no inbound callback)
Z-Wave Debug . . getNodeProtocolInfo: requeuing 1 unsolicited packets
Z-Wave Debug . . getNodeProtocolInfo: node 009, class name: Smoke Sensor (routing)
Z-Wave Debug . . getNodeProtocolInfo: class hierarchy: Routing Slave : Sensor Alarm : Smoke Sensor (routing) (04 : A1 : 07)
Z-Wave Debug . . getNodeProtocolInfo: base class command: 71
Z-Wave Debug . . getNodeProtocolInfo: supported class commands: 20 80 85 86 71 72
Z-Wave Debug . . getNodeProtocolInfo: encrypt class commands:
Z-Wave Debug . . getNodeProtocolInfo: features: routing, battery, beaming
Z-Wave Debug overriding node 009 type from zwCustomType to zwOnOffSensorType
Z-Wave Debug SENT getNodeProtocolInfo: 01 04 00 41 0A B0
Z-Wave Debug RCVD getNodeProtocolInfo: 01 09 01 41 D3 9C 00 04 10 01 EC (no inbound callback)
Z-Wave Debug . . getNodeProtocolInfo: requeuing 1 unsolicited packets
Z-Wave Debug . . getNodeProtocolInfo: node 010, class name: Relay Power Switch
Z-Wave Debug . . getNodeProtocolInfo: class hierarchy: Routing Slave : Relay Switch : Relay Power Switch (04 : 10 : 01)
Z-Wave Debug . . getNodeProtocolInfo: base class command: 25
Z-Wave Debug . . getNodeProtocolInfo: supported class commands: 20 25 27
Z-Wave Debug . . getNodeProtocolInfo: encrypt class commands:
Z-Wave Debug . . getNodeProtocolInfo: features: routing, beaming
Z-Wave Debug started polling of "010 - HiFi-Anlage" approx every 3600 seconds
Z-Wave Debug SENT getNodeProtocolInfo: 01 04 00 41 0B B1
Z-Wave Debug RCVD getNodeProtocolInfo: 01 09 01 41 D3 9C 01 04 10 01 ED (no inbound callback)
Z-Wave Debug . . getNodeProtocolInfo: requeuing 1 unsolicited packets
Z-Wave Debug . . getNodeProtocolInfo: node 011, class name: Relay Power Switch
Z-Wave Debug . . getNodeProtocolInfo: class hierarchy: Routing Slave : Relay Switch : Relay Power Switch (04 : 10 : 01)
Z-Wave Debug . . getNodeProtocolInfo: base class command: 25
Z-Wave Debug . . getNodeProtocolInfo: supported class commands: 20 25 27
Z-Wave Debug . . getNodeProtocolInfo: encrypt class commands:
Z-Wave Debug . . getNodeProtocolInfo: features: routing, beaming
Z-Wave Debug started polling of "011 - Router" approx every 3600 seconds
Z-Wave Debug SENT getNodeProtocolInfo: 01 04 00 41 0C B6
Z-Wave Debug RCVD getNodeProtocolInfo: 01 09 01 41 53 9C 00 04 08 06 73 (no inbound callback)
Z-Wave Debug . . getNodeProtocolInfo: requeuing 1 unsolicited packets
Z-Wave Debug . . getNodeProtocolInfo: node 012, class name: General Thermostat (v2)
Z-Wave Debug . . getNodeProtocolInfo: class hierarchy: Routing Slave : Thermostat : General Thermostat (v2) (04 : 08 : 06)
Z-Wave Debug . . getNodeProtocolInfo: base class command: 40
Z-Wave Debug . . getNodeProtocolInfo: supported class commands: 20 40 72 43 86
Z-Wave Debug . . getNodeProtocolInfo: encrypt class commands:
Z-Wave Debug . . getNodeProtocolInfo: features: routing, beaming
Z-Wave found module included in controller with no matching device (missing or disabled): 012 - General Thermostat (v2)
Z-Wave Debug SENT getNodeProtocolInfo: 01 04 00 41 11 AB
Z-Wave Debug RCVD getNodeProtocolInfo: 01 09 01 41 53 9C 00 04 08 06 73 (no inbound callback)
Z-Wave Debug . . getNodeProtocolInfo: requeuing 1 unsolicited packets
Z-Wave Debug . . getNodeProtocolInfo: node 017, class name: General Thermostat (v2)
Z-Wave Debug . . getNodeProtocolInfo: class hierarchy: Routing Slave : Thermostat : General Thermostat (v2) (04 : 08 : 06)
Z-Wave Debug . . getNodeProtocolInfo: base class command: 40
Z-Wave Debug . . getNodeProtocolInfo: supported class commands: 20 40 72 43 86
Z-Wave Debug . . getNodeProtocolInfo: encrypt class commands:
Z-Wave Debug . . getNodeProtocolInfo: features: routing, beaming
Z-Wave found module included in controller with no matching device (missing or disabled): 017 - General Thermostat (v2)
Z-Wave Debug SENT getNodeProtocolInfo: 01 04 00 41 14 AE
Z-Wave Debug RCVD getNodeProtocolInfo: 01 09 01 41 13 96 01 01 01 06 34 (no inbound callback)
Z-Wave Debug . . getNodeProtocolInfo: requeuing 1 unsolicited packets
Z-Wave Debug . . getNodeProtocolInfo: node 020, class name: Remote Control Simple
Z-Wave Debug . . getNodeProtocolInfo: class hierarchy: Controller : Portable Controller : Remote Control Simple (01 : 01 : 06)
Z-Wave Debug . . getNodeProtocolInfo: base class command: 00
Z-Wave Debug . . getNodeProtocolInfo: supported class commands: 20
Z-Wave Debug . . getNodeProtocolInfo: encrypt class commands:
Z-Wave Debug . . getNodeProtocolInfo: features: beaming
Z-Wave Debug SENT getNodeProtocolInfo: 01 04 00 41 15 AF
Z-Wave Debug RCVD getNodeProtocolInfo: 01 09 01 41 D3 9C 01 04 10 01 ED (no inbound callback)
Z-Wave Debug . . getNodeProtocolInfo: requeuing 1 unsolicited packets
Z-Wave Debug . . getNodeProtocolInfo: node 021, class name: Relay Power Switch
Z-Wave Debug . . getNodeProtocolInfo: class hierarchy: Routing Slave : Relay Switch : Relay Power Switch (04 : 10 : 01)
Z-Wave Debug . . getNodeProtocolInfo: base class command: 25
Z-Wave Debug . . getNodeProtocolInfo: supported class commands: 20 25 27
Z-Wave Debug . . getNodeProtocolInfo: encrypt class commands:
Z-Wave Debug . . getNodeProtocolInfo: features: routing, beaming
Z-Wave Debug SENT getNodeProtocolInfo: 01 04 00 41 16 AC
Z-Wave Debug RCVD getNodeProtocolInfo: 01 09 01 41 53 9C 01 04 07 01 7A (no inbound callback)
Z-Wave Debug . . getNodeProtocolInfo: requeuing 1 unsolicited packets
Z-Wave Debug . . getNodeProtocolInfo: node 022, class name: Notification Sensor
Z-Wave Debug . . getNodeProtocolInfo: class hierarchy: Routing Slave : Notification Sensor : Notification Sensor (04 : 07 : 01)
Z-Wave Debug . . getNodeProtocolInfo: base class command: 00
Z-Wave Debug . . getNodeProtocolInfo: supported class commands: 20
Z-Wave Debug . . getNodeProtocolInfo: encrypt class commands:
Z-Wave Debug . . getNodeProtocolInfo: features: routing, beaming
Z-Wave Debug starting node healing thread
Z-Wave Debug starting node status polling thread
Z-Wave Debug RCVD packet: 01 07 00 13 E1 01 03 99 91 (hex)
Z-Wave Debug SENT setWakeInterval: 01 0D 00 13 16 06 84 04 00 01 2C 01 25 F1 89
Z-Wave Debug RCVD setWakeInterval: 01 07 00 13 F1 01 03 85 9D (node NAK)
Z-Wave Debug . . setWakeInterval: requeuing 1 unsolicited packets
Z-Wave Error device "Rauchmelder Wohnzimmer" may be asleep. configuration changes will be set during the next wake interval.
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 01 22 00 DF 3B
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 1, raw value 2200...
Z-Wave Debug . . requestVarSensorStatus: 22.3 °C (float: 22.300000)
Z-Wave Debug received "Temperatursensor Flur" sensor update to 22.3 °C
23. May 2020 at 19:55:42
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 03 0A 00 02 CC
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 3, raw value 0A00...
Z-Wave Debug . . requestVarSensorStatus: 2 lux (float: 2.000000)
Z-Wave Debug received "Helligkeitssensor Flur" sensor update to 2 lux
23. May 2020 at 19:56:16
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 01 22 00 E0 04
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 1, raw value 2200...
Z-Wave Debug . . requestVarSensorStatus: 22.4 °C (float: 22.400000)
Z-Wave Debug received "Temperatursensor Flur" sensor update to 22.4 °C
23. May 2020 at 19:56:41
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 03 0A 00 02 CC
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 3, raw value 0A00...
Z-Wave Debug . . requestVarSensorStatus: 2 lux (float: 2.000000)
Z-Wave Debug received "Helligkeitssensor Flur" sensor update to 2 lux
23. May 2020 at 19:56:58
Online Sensor "Internet connectivity sensor" on
23. May 2020 at 19:57:15
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 01 22 00 E0 04
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 1, raw value 2200...
Z-Wave Debug . . requestVarSensorStatus: 22.4 °C (float: 22.400000)
Z-Wave Debug received "Temperatursensor Flur" sensor update to 22.4 °C
23. May 2020 at 19:57:41
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 03 0A 00 02 CC
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 3, raw value 0A00...
Z-Wave Debug . . requestVarSensorStatus: 2 lux (float: 2.000000)
Z-Wave Debug received "Helligkeitssensor Flur" sensor update to 2 lux
Z-Wave Debug RCVD nonceFetch: node 021
Z-Wave Debug SENT nonceReport: 01 11 00 13 15 0A 98 80 65 CF 4A 06 70 36 04 38 25 F2 B1
Z-Wave Debug RCVD nonceReport: 01 07 00 13 F2 00 00 19 00 (node ACK)
Z-Wave Debug RCVD encryptedPacket: 00 32 02 21 64 00 00 71 A2 02 58 00 00 71 A2 (decrypted)
Z-Wave Debug RCVD requestMeterLevel: 01 14 00 04 00 15 0E 32 02 21 64 00 00 71 A2 02 58 00 00 71 A2 FF
Z-Wave Debug . . requestMeterLevel: node 021, endpoint None, meterType 01, raw value 6400...
Z-Wave Debug . . requestMeterLevel: 29.090 kWh (float: 29.090000)
23. May 2020 at 19:58:15
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 01 22 00 E0 04
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 1, raw value 2200...
Z-Wave Debug . . requestVarSensorStatus: 22.4 °C (float: 22.400000)
Z-Wave Debug received "Temperatursensor Flur" sensor update to 22.4 °C
23. May 2020 at 19:58:41
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 03 0A 00 02 CC
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 3, raw value 0A00...
Z-Wave Debug . . requestVarSensorStatus: 2 lux (float: 2.000000)
Z-Wave Debug received "Helligkeitssensor Flur" sensor update to 2 lux
23. May 2020 at 19:59:15
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 01 22 00 DF 3B
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 1, raw value 2200...
Z-Wave Debug . . requestVarSensorStatus: 22.3 °C (float: 22.300000)
Z-Wave Debug received "Temperatursensor Flur" sensor update to 22.3 °C
23. May 2020 at 19:59:41
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 03 0A 00 02 CC
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 3, raw value 0A00...
Z-Wave Debug . . requestVarSensorStatus: 2 lux (float: 2.000000)
Z-Wave Debug received "Helligkeitssensor Flur" sensor update to 2 lux
23. May 2020 at 20:00:14
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 01 22 00 DF 3B
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 1, raw value 2200...
Z-Wave Debug . . requestVarSensorStatus: 22.3 °C (float: 22.300000)
Z-Wave Debug received "Temperatursensor Flur" sensor update to 22.3 °C
Z-Wave Debug RCVD nodeAwake: 01 08 00 04 00 03 02 84 07 71
Z-Wave Debug . . nodeAwake: node 003
Z-Wave Debug SENT requestBatteryLevel: 01 09 00 13 03 02 80 02 25 F3 B0
Z-Wave Debug RCVD requestBatteryLevel: 01 07 00 13 F3 00 00 15 0D (node ACK)
Z-Wave Debug . . nodeAwake: inhibit count++ to 1
Z-Wave Debug . . nodeAwake: started inhibit sleep timer
Z-Wave Debug RCVD requestBatteryLevel: 01 09 00 04 00 03 03 80 03 5A 2B
Z-Wave Debug . . requestBatteryLevel: node 003, level 90
Z-Wave received "003 - Türsensor Eingangstür" status update battery level 90%
Z-Wave Debug . . nodeAwake: inhibit count-- to 0
Z-Wave Debug . . nodeAwake: stopping inhibit sleep timer
Z-Wave Debug SENT goToSleep: 01 09 00 13 03 02 84 08 24 F4 B8
Z-Wave Debug RCVD packet: 01 07 00 13 F4 00 00 04 1B (hex)
23. May 2020 at 20:00:40
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 03 0A 00 02 CC
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 3, raw value 0A00...
Z-Wave Debug . . requestVarSensorStatus: 2 lux (float: 2.000000)
Z-Wave Debug received "Helligkeitssensor Flur" sensor update to 2 lux
23. May 2020 at 20:01:14
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 01 22 00 E0 04
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 1, raw value 2200...
Z-Wave Debug . . requestVarSensorStatus: 22.4 °C (float: 22.400000)
Z-Wave Debug received "Temperatursensor Flur" sensor update to 22.4 °C
23. May 2020 at 20:01:40
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 03 0A 00 02 CC
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 3, raw value 0A00...
Z-Wave Debug . . requestVarSensorStatus: 2 lux (float: 2.000000)
Z-Wave Debug received "Helligkeitssensor Flur" sensor update to 2 lux
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 03 0A 00 02 CC
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 3, raw value 0A00...
Z-Wave Debug . . requestVarSensorStatus: 2 lux (float: 2.000000)
Z-Wave Debug received "Helligkeitssensor Flur" sensor update to 2 lux
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 03 0A 00 02 CC
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 3, raw value 0A00...
Z-Wave Debug . . requestVarSensorStatus: 2 lux (float: 2.000000)
Z-Wave Debug received "Helligkeitssensor Flur" sensor update to 2 lux
23. May 2020 at 20:02:14
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 01 22 00 DF 3B
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 1, raw value 2200...
Z-Wave Debug . . requestVarSensorStatus: 22.3 °C (float: 22.300000)
Z-Wave Debug received "Temperatursensor Flur" sensor update to 22.3 °C
23. May 2020 at 20:02:39
Z-Wave Debug RCVD nodeAwake: 01 08 00 04 00 11 02 84 07 63
Z-Wave Debug . . nodeAwake: node 017
Z-Wave Debug SENT goToSleep: 01 09 00 13 11 02 84 08 24 F5 AB
Z-Wave Debug RCVD packet: 01 07 00 13 F5 00 00 01 1F (hex)
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 03 0A 00 02 CC
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 3, raw value 0A00...
Z-Wave Debug . . requestVarSensorStatus: 2 lux (float: 2.000000)
Z-Wave Debug received "Helligkeitssensor Flur" sensor update to 2 lux
23. May 2020 at 20:03:13
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 01 22 00 DF 3B
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 1, raw value 2200...
Z-Wave Debug . . requestVarSensorStatus: 22.3 °C (float: 22.300000)
Z-Wave Debug received "Temperatursensor Flur" sensor update to 22.3 °C
23. May 2020 at 20:03:39
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 03 0A 00 02 CC
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 3, raw value 0A00...
Z-Wave Debug . . requestVarSensorStatus: 2 lux (float: 2.000000)
Z-Wave Debug received "Helligkeitssensor Flur" sensor update to 2 lux
23. May 2020 at 20:04:13
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 01 22 00 DF 3B
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 1, raw value 2200...
Z-Wave Debug . . requestVarSensorStatus: 22.3 °C (float: 22.300000)
Z-Wave Debug received "Temperatursensor Flur" sensor update to 22.3 °C
Z-Wave Debug RCVD nodeAwake: 01 08 00 04 00 0C 02 84 07 7E
Z-Wave Debug . . nodeAwake: node 012
Z-Wave Debug SENT goToSleep: 01 09 00 13 0C 02 84 08 24 F6 B5
Z-Wave Debug RCVD packet: 01 07 00 13 F6 00 00 0A 17 (hex)
23. May 2020 at 20:04:39
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 03 0A 00 02 CC
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 3, raw value 0A00...
Z-Wave Debug . . requestVarSensorStatus: 2 lux (float: 2.000000)
Z-Wave Debug received "Helligkeitssensor Flur" sensor update to 2 lux
23. May 2020 at 20:05:13
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 01 22 00 E0 04
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 1, raw value 2200...
Z-Wave Debug . . requestVarSensorStatus: 22.4 °C (float: 22.400000)
Z-Wave Debug received "Temperatursensor Flur" sensor update to 22.4 °C
23. May 2020 at 20:05:39
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 03 0A 00 02 CC
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 3, raw value 0A00...
Z-Wave Debug . . requestVarSensorStatus: 2 lux (float: 2.000000)
Z-Wave Debug received "Helligkeitssensor Flur" sensor update to 2 lux
23. May 2020 at 20:06:13
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 01 22 00 E0 04
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 1, raw value 2200...
Z-Wave Debug . . requestVarSensorStatus: 22.4 °C (float: 22.400000)
Z-Wave Debug received "Temperatursensor Flur" sensor update to 22.4 °C
23. May 2020 at 20:06:38
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 03 0A 00 02 CC
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 3, raw value 0A00...
Z-Wave Debug . . requestVarSensorStatus: 2 lux (float: 2.000000)
Z-Wave Debug received "Helligkeitssensor Flur" sensor update to 2 lux
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 03 0A 00 02 CC
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 3, raw value 0A00...
Z-Wave Debug . . requestVarSensorStatus: 2 lux (float: 2.000000)
Z-Wave Debug received "Helligkeitssensor Flur" sensor update to 2 lux
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 03 0A 00 02 CC
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 3, raw value 0A00...
Z-Wave Debug . . requestVarSensorStatus: 2 lux (float: 2.000000)
Z-Wave Debug received "Helligkeitssensor Flur" sensor update to 2 lux
23. May 2020 at 20:07:12
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 01 22 00 DF 3B
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 1, raw value 2200...
Z-Wave Debug . . requestVarSensorStatus: 22.3 °C (float: 22.300000)
Z-Wave Debug received "Temperatursensor Flur" sensor update to 22.3 °C
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 01 22 00 DF 3B
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 1, raw value 2200...
Z-Wave Debug . . requestVarSensorStatus: 22.3 °C (float: 22.300000)
Z-Wave Debug received "Temperatursensor Flur" sensor update to 22.3 °C
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 01 22 00 DF 3B
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 1, raw value 2200...
Z-Wave Debug . . requestVarSensorStatus: 22.3 °C (float: 22.300000)
Z-Wave Debug received "Temperatursensor Flur" sensor update to 22.3 °C
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 01 22 00 DF 3B
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 1, raw value 2200...
Z-Wave Debug . . requestVarSensorStatus: 22.3 °C (float: 22.300000)
Z-Wave Debug received "Temperatursensor Flur" sensor update to 22.3 °C
23. May 2020 at 20:07:38
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 03 0A 00 02 CC
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 3, raw value 0A00...
Z-Wave Debug . . requestVarSensorStatus: 2 lux (float: 2.000000)
Z-Wave Debug received "Helligkeitssensor Flur" sensor update to 2 lux
Z-Wave Debug RCVD nonceFetch: node 021
Z-Wave Debug SENT nonceReport: 01 11 00 13 15 0A 98 80 FE D7 3F D3 EC 1A 69 0F 25 F7 7D
Z-Wave Debug RCVD nonceReport: 01 07 00 13 F7 00 00 15 09 (node ACK)
Z-Wave Debug RCVD encryptedPacket: 00 32 02 21 64 00 00 71 A2 02 58 00 00 71 A2 (decrypted)
Z-Wave Debug RCVD requestMeterLevel: 01 14 00 04 00 15 0E 32 02 21 64 00 00 71 A2 02 58 00 00 71 A2 FF
Z-Wave Debug . . requestMeterLevel: node 021, endpoint None, meterType 01, raw value 6400...
Z-Wave Debug . . requestMeterLevel: 29.090 kWh (float: 29.090000)
23. May 2020 at 20:08:12
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 01 22 00 DF 3B
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 1, raw value 2200...
Z-Wave Debug . . requestVarSensorStatus: 22.3 °C (float: 22.300000)
Z-Wave Debug received "Temperatursensor Flur" sensor update to 22.3 °C
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 01 22 00 DF 3B
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 1, raw value 2200...
Z-Wave Debug . . requestVarSensorStatus: 22.3 °C (float: 22.300000)
Z-Wave Debug received "Temperatursensor Flur" sensor update to 22.3 °C
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 01 22 00 DF 3B
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 1, raw value 2200...
Z-Wave Debug . . requestVarSensorStatus: 22.3 °C (float: 22.300000)
Z-Wave Debug received "Temperatursensor Flur" sensor update to 22.3 °C
23. May 2020 at 20:08:38
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 03 0A 00 02 CC
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 3, raw value 0A00...
Z-Wave Debug . . requestVarSensorStatus: 2 lux (float: 2.000000)
Z-Wave Debug received "Helligkeitssensor Flur" sensor update to 2 lux
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 03 0A 00 02 CC
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 3, raw value 0A00...
Z-Wave Debug . . requestVarSensorStatus: 2 lux (float: 2.000000)
Z-Wave Debug received "Helligkeitssensor Flur" sensor update to 2 lux
23. May 2020 at 20:09:12
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 01 22 00 E0 04
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 1, raw value 2200...
Z-Wave Debug . . requestVarSensorStatus: 22.4 °C (float: 22.400000)
Z-Wave Debug received "Temperatursensor Flur" sensor update to 22.4 °C
23. May 2020 at 20:09:38
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 03 0A 00 02 CC
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 3, raw value 0A00...
Z-Wave Debug . . requestVarSensorStatus: 2 lux (float: 2.000000)
Z-Wave Debug received "Helligkeitssensor Flur" sensor update to 2 lux
23. May 2020 at 20:10:11
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 01 22 00 DF 3B
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 1, raw value 2200...
Z-Wave Debug . . requestVarSensorStatus: 22.3 °C (float: 22.300000)
Z-Wave Debug received "Temperatursensor Flur" sensor update to 22.3 °C
23. May 2020 at 20:10:37
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 03 0A 00 02 CC
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 3, raw value 0A00...
Z-Wave Debug . . requestVarSensorStatus: 2 lux (float: 2.000000)
Z-Wave Debug received "Helligkeitssensor Flur" sensor update to 2 lux
23. May 2020 at 20:11:11
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 01 22 00 E0 04
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 1, raw value 2200...
Z-Wave Debug . . requestVarSensorStatus: 22.4 °C (float: 22.400000)
Z-Wave Debug received "Temperatursensor Flur" sensor update to 22.4 °C
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 01 22 00 E0 04
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 1, raw value 2200...
Z-Wave Debug . . requestVarSensorStatus: 22.4 °C (float: 22.400000)
Z-Wave Debug received "Temperatursensor Flur" sensor update to 22.4 °C
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 01 22 00 E0 04
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 1, raw value 2200...
Z-Wave Debug . . requestVarSensorStatus: 22.4 °C (float: 22.400000)
Z-Wave Debug received "Temperatursensor Flur" sensor update to 22.4 °C
23. May 2020 at 20:11:37
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 03 0A 00 02 CC
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 3, raw value 0A00...
Z-Wave Debug . . requestVarSensorStatus: 2 lux (float: 2.000000)
Z-Wave Debug received "Helligkeitssensor Flur" sensor update to 2 lux
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 03 0A 00 02 CC
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 3, raw value 0A00...
Z-Wave Debug . . requestVarSensorStatus: 2 lux (float: 2.000000)
Z-Wave Debug received "Helligkeitssensor Flur" sensor update to 2 lux
23. May 2020 at 20:12:11
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 01 22 00 E0 04
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 1, raw value 2200...
Z-Wave Debug . . requestVarSensorStatus: 22.4 °C (float: 22.400000)
Z-Wave Debug received "Temperatursensor Flur" sensor update to 22.4 °C
23. May 2020 at 20:12:37
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 03 0A 00 02 CC
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 3, raw value 0A00...
Z-Wave Debug . . requestVarSensorStatus: 2 lux (float: 2.000000)
Z-Wave Debug received "Helligkeitssensor Flur" sensor update to 2 lux
23. May 2020 at 20:13:10
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 01 22 00 DF 3B
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 1, raw value 2200...
Z-Wave Debug . . requestVarSensorStatus: 22.3 °C (float: 22.300000)
Z-Wave Debug received "Temperatursensor Flur" sensor update to 22.3 °C
23. May 2020 at 20:13:36
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 03 0A 00 02 CC
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 3, raw value 0A00...
Z-Wave Debug . . requestVarSensorStatus: 2 lux (float: 2.000000)
Z-Wave Debug received "Helligkeitssensor Flur" sensor update to 2 lux
23. May 2020 at 20:14:11
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 01 22 00 E0 04
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 1, raw value 2200...
Z-Wave Debug . . requestVarSensorStatus: 22.4 °C (float: 22.400000)
Z-Wave Debug received "Temperatursensor Flur" sensor update to 22.4 °C
23. May 2020 at 20:14:36
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 03 0A 00 02 CC
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 3, raw value 0A00...
Z-Wave Debug . . requestVarSensorStatus: 2 lux (float: 2.000000)
Z-Wave Debug received "Helligkeitssensor Flur" sensor update to 2 lux
23. May 2020 at 20:15:10
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 01 22 00 DF 3B
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 1, raw value 2200...
Z-Wave Debug . . requestVarSensorStatus: 22.3 °C (float: 22.300000)
Z-Wave Debug received "Temperatursensor Flur" sensor update to 22.3 °C
23. May 2020 at 20:15:36
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 03 0A 00 02 CC
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 3, raw value 0A00...
Z-Wave Debug . . requestVarSensorStatus: 2 lux (float: 2.000000)
Z-Wave Debug received "Helligkeitssensor Flur" sensor update to 2 lux
23. May 2020 at 20:16:10
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 01 22 00 DF 3B
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 1, raw value 2200...
Z-Wave Debug . . requestVarSensorStatus: 22.3 °C (float: 22.300000)
Z-Wave Debug received "Temperatursensor Flur" sensor update to 22.3 °C
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 01 22 00 DF 3B
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 1, raw value 2200...
Z-Wave Debug . . requestVarSensorStatus: 22.3 °C (float: 22.300000)
Z-Wave Debug received "Temperatursensor Flur" sensor update to 22.3 °C
Z-Wave Debug RCVD nodeAwake: 01 08 00 04 00 05 02 84 07 77
Z-Wave Debug . . nodeAwake: node 005
Z-Wave Debug SENT requestBatteryLevel: 01 09 00 13 05 02 80 02 25 F8 BD
Z-Wave Debug RCVD requestBatteryLevel: 01 07 00 13 F8 00 00 03 10 (node ACK)
Z-Wave Debug . . nodeAwake: inhibit count++ to 1
Z-Wave Debug . . nodeAwake: started inhibit sleep timer
Z-Wave Debug RCVD requestBatteryLevel: 01 09 00 04 00 05 03 80 03 41 36
Z-Wave Debug . . requestBatteryLevel: node 005, level 65
Z-Wave received "005 - Wassermelder Bad" status update battery level 65%
Z-Wave Debug . . nodeAwake: inhibit count-- to 0
Z-Wave Debug . . nodeAwake: stopping inhibit sleep timer
Z-Wave Debug SENT goToSleep: 01 09 00 13 05 02 84 08 24 F9 B3
Z-Wave Debug RCVD packet: 01 07 00 13 F9 00 00 02 10 (hex)
23. May 2020 at 20:16:36
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 03 0A 00 02 CC
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 3, raw value 0A00...
Z-Wave Debug . . requestVarSensorStatus: 2 lux (float: 2.000000)
Z-Wave Debug received "Helligkeitssensor Flur" sensor update to 2 lux
Z-Wave Debug RCVD nodeAwake: 01 08 00 04 00 02 02 84 07 70
Z-Wave Debug . . nodeAwake: node 002
Z-Wave Debug SENT requestBatteryLevel: 01 09 00 13 02 02 80 02 25 FA B8
Z-Wave Debug RCVD requestBatteryLevel: 01 07 00 13 FA 00 00 06 17 (node ACK)
Z-Wave Debug . . nodeAwake: inhibit count++ to 1
Z-Wave Debug . . nodeAwake: started inhibit sleep timer
Z-Wave Debug RCVD requestBatteryLevel: 01 09 00 04 00 02 03 80 03 64 14
Z-Wave Debug . . requestBatteryLevel: node 002, level 100
Z-Wave Debug received "002 - Bewegungsmelder Flur" status update battery level 100%
Z-Wave Debug . . nodeAwake: inhibit count-- to 0
Z-Wave Debug . . nodeAwake: stopping inhibit sleep timer
Z-Wave Debug SENT goToSleep: 01 09 00 13 02 02 84 08 24 FB B6
Z-Wave Debug RCVD packet: 01 07 00 13 FB 00 00 02 12 (hex)
23. May 2020 at 20:17:09
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 01 22 00 E0 04
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 1, raw value 2200...
Z-Wave Debug . . requestVarSensorStatus: 22.4 °C (float: 22.400000)
Z-Wave Debug received "Temperatursensor Flur" sensor update to 22.4 °C
23. May 2020 at 20:17:35
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 03 0A 00 02 CC
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 3, raw value 0A00...
Z-Wave Debug . . requestVarSensorStatus: 2 lux (float: 2.000000)
Z-Wave Debug received "Helligkeitssensor Flur" sensor update to 2 lux
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 03 0A 00 02 CC
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 3, raw value 0A00...
Z-Wave Debug . . requestVarSensorStatus: 2 lux (float: 2.000000)
Z-Wave Debug received "Helligkeitssensor Flur" sensor update to 2 lux
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 03 0A 00 02 CC
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 3, raw value 0A00...
Z-Wave Debug . . requestVarSensorStatus: 2 lux (float: 2.000000)
Z-Wave Debug received "Helligkeitssensor Flur" sensor update to 2 lux
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 03 0A 00 02 CC
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 3, raw value 0A00...
Z-Wave Debug . . requestVarSensorStatus: 2 lux (float: 2.000000)
Z-Wave Debug received "Helligkeitssensor Flur" sensor update to 2 lux
Z-Wave Debug RCVD nonceFetch: node 021
Z-Wave Debug SENT nonceReport: 01 11 00 13 15 0A 98 80 59 AE 28 90 44 4B E9 0F 25 FC 85
Z-Wave Debug RCVD nonceReport: 01 07 00 13 FC 00 00 19 0E (node ACK)
Z-Wave Debug . . nonceReport: requeuing 1 unsolicited packets
Z-Wave Debug RCVD nodeAwake: 01 08 00 04 00 11 02 84 07 63
Z-Wave Debug . . nodeAwake: node 017
Z-Wave Debug SENT goToSleep: 01 09 00 13 11 02 84 08 24 FD A3
Z-Wave Debug RCVD packet: 01 07 00 13 FD 00 00 01 17 (hex)
Z-Wave Debug RCVD encryptedPacket: 00 32 02 21 64 00 00 71 A2 02 58 00 00 71 A2 (decrypted)
Z-Wave Debug RCVD requestMeterLevel: 01 14 00 04 00 15 0E 32 02 21 64 00 00 71 A2 02 58 00 00 71 A2 FF
Z-Wave Debug . . requestMeterLevel: node 021, endpoint None, meterType 01, raw value 6400...
Z-Wave Debug . . requestMeterLevel: 29.090 kWh (float: 29.090000)
23. May 2020 at 20:18:09
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 01 22 00 E0 04
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 1, raw value 2200...
Z-Wave Debug . . requestVarSensorStatus: 22.4 °C (float: 22.400000)
Z-Wave Debug received "Temperatursensor Flur" sensor update to 22.4 °C
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 01 22 00 E0 04
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 1, raw value 2200...
Z-Wave Debug . . requestVarSensorStatus: 22.4 °C (float: 22.400000)
Z-Wave Debug received "Temperatursensor Flur" sensor update to 22.4 °C
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 01 22 00 E0 04
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 1, raw value 2200...
Z-Wave Debug . . requestVarSensorStatus: 22.4 °C (float: 22.400000)
Z-Wave Debug received "Temperatursensor Flur" sensor update to 22.4 °C
23. May 2020 at 20:18:35
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 03 0A 00 02 CC
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 3, raw value 0A00...
Z-Wave Debug . . requestVarSensorStatus: 2 lux (float: 2.000000)
Z-Wave Debug received "Helligkeitssensor Flur" sensor update to 2 lux
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 03 0A 00 02 CC
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 3, raw value 0A00...
Z-Wave Debug . . requestVarSensorStatus: 2 lux (float: 2.000000)
Z-Wave Debug received "Helligkeitssensor Flur" sensor update to 2 lux
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 03 0A 00 02 CC
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 3, raw value 0A00...
Z-Wave Debug . . requestVarSensorStatus: 2 lux (float: 2.000000)
Z-Wave Debug received "Helligkeitssensor Flur" sensor update to 2 lux
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 03 0A 00 02 CC
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 3, raw value 0A00...
Z-Wave Debug . . requestVarSensorStatus: 2 lux (float: 2.000000)
Z-Wave Debug received "Helligkeitssensor Flur" sensor update to 2 lux
23. May 2020 at 20:19:09
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 01 22 00 E0 04
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 1, raw value 2200...
Z-Wave Debug . . requestVarSensorStatus: 22.4 °C (float: 22.400000)
Z-Wave Debug received "Temperatursensor Flur" sensor update to 22.4 °C
23. May 2020 at 20:19:25
Z-Wave Debug RCVD nodeAwake: 01 08 00 04 00 0C 02 84 07 7E
Z-Wave Debug . . nodeAwake: node 012
Z-Wave Debug SENT goToSleep: 01 09 00 13 0C 02 84 08 24 FE BD
Z-Wave Debug RCVD packet: 01 07 00 13 FE 00 00 0D 18 (hex)
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 03 0A 00 02 CC
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 3, raw value 0A00...
Z-Wave Debug . . requestVarSensorStatus: 2 lux (float: 2.000000)
Z-Wave Debug received "Helligkeitssensor Flur" sensor update to 2 lux
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 03 0A 00 02 CC
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 3, raw value 0A00...
Z-Wave Debug . . requestVarSensorStatus: 2 lux (float: 2.000000)
Z-Wave Debug received "Helligkeitssensor Flur" sensor update to 2 lux
23. May 2020 at 20:20:09
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 01 22 00 DF 3B
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 1, raw value 2200...
Z-Wave Debug . . requestVarSensorStatus: 22.3 °C (float: 22.300000)
Z-Wave Debug received "Temperatursensor Flur" sensor update to 22.3 °C
23. May 2020 at 20:20:34
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 03 0A 00 02 CC
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 3, raw value 0A00...
Z-Wave Debug . . requestVarSensorStatus: 2 lux (float: 2.000000)
Z-Wave Debug received "Helligkeitssensor Flur" sensor update to 2 lux
23. May 2020 at 20:21:08
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 01 22 00 E0 04
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 1, raw value 2200...
Z-Wave Debug . . requestVarSensorStatus: 22.4 °C (float: 22.400000)
Z-Wave Debug received "Temperatursensor Flur" sensor update to 22.4 °C
23. May 2020 at 20:21:34
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 03 0A 00 02 CC
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 3, raw value 0A00...
Z-Wave Debug . . requestVarSensorStatus: 2 lux (float: 2.000000)
Z-Wave Debug received "Helligkeitssensor Flur" sensor update to 2 lux
23. May 2020 at 20:22:08
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 01 22 00 DF 3B
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 1, raw value 2200...
Z-Wave Debug . . requestVarSensorStatus: 22.3 °C (float: 22.300000)
Z-Wave Debug received "Temperatursensor Flur" sensor update to 22.3 °C
23. May 2020 at 20:22:34
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 03 0A 00 02 CC
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 3, raw value 0A00...
Z-Wave Debug . . requestVarSensorStatus: 2 lux (float: 2.000000)
Z-Wave Debug received "Helligkeitssensor Flur" sensor update to 2 lux
23. May 2020 at 20:23:08
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 01 22 00 DF 3B
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 1, raw value 2200...
Z-Wave Debug . . requestVarSensorStatus: 22.3 °C (float: 22.300000)
Z-Wave Debug received "Temperatursensor Flur" sensor update to 22.3 °C
23. May 2020 at 20:23:33
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 03 0A 00 01 CF
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 3, raw value 0A00...
Z-Wave Debug . . requestVarSensorStatus: 1 lux (float: 1.000000)
Z-Wave Debug received "Helligkeitssensor Flur" sensor update to 1 lux
23. May 2020 at 20:24:08
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 01 22 00 DF 3B
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 1, raw value 2200...
Z-Wave Debug . . requestVarSensorStatus: 22.3 °C (float: 22.300000)
Z-Wave Debug received "Temperatursensor Flur" sensor update to 22.3 °C
23. May 2020 at 20:24:33
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 03 0A 00 01 CF
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 3, raw value 0A00...
Z-Wave Debug . . requestVarSensorStatus: 1 lux (float: 1.000000)
Z-Wave Debug received "Helligkeitssensor Flur" sensor update to 1 lux
23. May 2020 at 20:25:07
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 01 22 00 E0 04
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 1, raw value 2200...
Z-Wave Debug . . requestVarSensorStatus: 22.4 °C (float: 22.400000)
Z-Wave Debug received "Temperatursensor Flur" sensor update to 22.4 °C
23. May 2020 at 20:25:33
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 03 0A 00 01 CF
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 3, raw value 0A00...
Z-Wave Debug . . requestVarSensorStatus: 1 lux (float: 1.000000)
Z-Wave Debug received "Helligkeitssensor Flur" sensor update to 1 lux
23. May 2020 at 20:26:07
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 01 22 00 DF 3B
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 1, raw value 2200...
Z-Wave Debug . . requestVarSensorStatus: 22.3 °C (float: 22.300000)
Z-Wave Debug received "Temperatursensor Flur" sensor update to 22.3 °C
23. May 2020 at 20:26:32
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 03 0A 00 01 CF
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 3, raw value 0A00...
Z-Wave Debug . . requestVarSensorStatus: 1 lux (float: 1.000000)
Z-Wave Debug received "Helligkeitssensor Flur" sensor update to 1 lux
23. May 2020 at 20:27:06
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 01 22 00 DF 3B
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 1, raw value 2200...
Z-Wave Debug . . requestVarSensorStatus: 22.3 °C (float: 22.300000)
Z-Wave Debug received "Temperatursensor Flur" sensor update to 22.3 °C
23. May 2020 at 20:27:32
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 03 0A 00 01 CF
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 3, raw value 0A00...
Z-Wave Debug . . requestVarSensorStatus: 1 lux (float: 1.000000)
Z-Wave Debug received "Helligkeitssensor Flur" sensor update to 1 lux
Z-Wave Debug RCVD nonceFetch: node 021
Z-Wave Debug SENT nonceReport: 01 11 00 13 15 0A 98 80 45 58 40 A3 F9 60 1F 34 25 FF 6C
Z-Wave Debug RCVD nonceReport: 01 07 00 13 FF 00 00 17 03 (node ACK)
Z-Wave Debug RCVD encryptedPacket: 00 32 02 21 64 00 00 71 A2 02 58 00 00 71 A2 (decrypted)
Z-Wave Debug RCVD requestMeterLevel: 01 14 00 04 00 15 0E 32 02 21 64 00 00 71 A2 02 58 00 00 71 A2 FF
Z-Wave Debug . . requestMeterLevel: node 021, endpoint None, meterType 01, raw value 6400...
Z-Wave Debug . . requestMeterLevel: 29.090 kWh (float: 29.090000)
23. May 2020 at 20:28:06
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 01 22 00 DF 3B
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 1, raw value 2200...
Z-Wave Debug . . requestVarSensorStatus: 22.3 °C (float: 22.300000)
Z-Wave Debug received "Temperatursensor Flur" sensor update to 22.3 °C
23. May 2020 at 20:28:32
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 03 0A 00 01 CF
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 3, raw value 0A00...
Z-Wave Debug . . requestVarSensorStatus: 1 lux (float: 1.000000)
Z-Wave Debug received "Helligkeitssensor Flur" sensor update to 1 lux
23. May 2020 at 20:29:05
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 01 22 00 E0 04
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 1, raw value 2200...
Z-Wave Debug . . requestVarSensorStatus: 22.4 °C (float: 22.400000)
Z-Wave Debug received "Temperatursensor Flur" sensor update to 22.4 °C
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 01 22 00 E0 04
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 1, raw value 2200...
Z-Wave Debug . . requestVarSensorStatus: 22.4 °C (float: 22.400000)
Z-Wave Debug received "Temperatursensor Flur" sensor update to 22.4 °C
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 01 22 00 E0 04
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 1, raw value 2200...
Z-Wave Debug . . requestVarSensorStatus: 22.4 °C (float: 22.400000)
Z-Wave Debug received "Temperatursensor Flur" sensor update to 22.4 °C
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 01 22 00 E0 04
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 1, raw value 2200...
Z-Wave Debug . . requestVarSensorStatus: 22.4 °C (float: 22.400000)
Z-Wave Debug received "Temperatursensor Flur" sensor update to 22.4 °C
23. May 2020 at 20:29:32
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 03 0A 00 01 CF
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 3, raw value 0A00...
Z-Wave Debug . . requestVarSensorStatus: 1 lux (float: 1.000000)
Z-Wave Debug received "Helligkeitssensor Flur" sensor update to 1 lux
23. May 2020 at 20:30:05
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 01 22 00 DF 3B
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 1, raw value 2200...
Z-Wave Debug . . requestVarSensorStatus: 22.3 °C (float: 22.300000)
Z-Wave Debug received "Temperatursensor Flur" sensor update to 22.3 °C
23. May 2020 at 20:30:20
Z-Wave Debug RCVD nodeAwake: 01 08 00 04 00 03 02 84 07 71
Z-Wave Debug . . nodeAwake: node 003
Z-Wave Debug . . . . . . . : skipping battery check (next check in 687 mins)
Z-Wave Debug SENT goToSleep: 01 09 00 13 03 02 84 08 24 01 4D
Z-Wave Debug RCVD packet: 01 07 00 13 01 00 00 08 E2 (hex)
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 03 0A 00 01 CF
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 3, raw value 0A00...
Z-Wave Debug . . requestVarSensorStatus: 1 lux (float: 1.000000)
Z-Wave Debug received "Helligkeitssensor Flur" sensor update to 1 lux
23. May 2020 at 20:31:05
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 01 22 00 DF 3B
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 1, raw value 2200...
Z-Wave Debug . . requestVarSensorStatus: 22.3 °C (float: 22.300000)
Z-Wave Debug received "Temperatursensor Flur" sensor update to 22.3 °C
23. May 2020 at 20:31:31
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 03 0A 00 01 CF
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 3, raw value 0A00...
Z-Wave Debug . . requestVarSensorStatus: 1 lux (float: 1.000000)
Z-Wave Debug received "Helligkeitssensor Flur" sensor update to 1 lux
23. May 2020 at 20:32:05
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 01 22 00 DF 3B
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 1, raw value 2200...
Z-Wave Debug . . requestVarSensorStatus: 22.3 °C (float: 22.300000)
Z-Wave Debug received "Temperatursensor Flur" sensor update to 22.3 °C
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 01 22 00 DF 3B
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 1, raw value 2200...
Z-Wave Debug . . requestVarSensorStatus: 22.3 °C (float: 22.300000)
Z-Wave Debug received "Temperatursensor Flur" sensor update to 22.3 °C
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 01 22 00 DF 3B
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 1, raw value 2200...
Z-Wave Debug . . requestVarSensorStatus: 22.3 °C (float: 22.300000)
Z-Wave Debug received "Temperatursensor Flur" sensor update to 22.3 °C
Z-Wave Debug RCVD requestVarSensorStatus: 01 0C 00 04 00 02 06 31 05 01 22 00 DF 3B
Z-Wave Debug . . requestVarSensorStatus: node 002, endpoint None, type 1, raw value 2200...
Z-Wave Debug . . requestVarSensorStatus: 22.3 °C (float: 22.300000)
Z-Wave Debug received "Temperatursensor Flur" sensor update to 22.3 °C
Z-Wave connection reset requested
Z-Wave connected to Z-Stick interface on /dev/cu.usbmodem471 (firmware 1.00)
Z-Wave found module included in controller with no matching device (missing or disabled): 012 - General Thermostat (v2)
Z-Wave found module included in controller with no matching device (missing or disabled): 017 - General Thermostat (v2)
Z-Wave Error device "Rauchmelder Wohnzimmer" may be asleep. configuration changes will be set during the next wake interval.
P.S. I've removed my public IP-adress in the log.
Thanks in advance!
Yassi
- matt (support) offline
- Site Admin
-
- Posts: 21417
- Joined: Jan 27, 2003
- Location: Texas
Re: Fibaro smoke sensor FGSD002 doesn't update battery statu
So it looks like that module is not waking up frequently. Here is Indigo trying to change the wake interval at the beginning:
Z-Wave Debug SENT setWakeInterval: 01 0D 00 13 16 06 84 04 00 01 2C 01 25 F1 89
Z-Wave Debug RCVD setWakeInterval: 01 07 00 13 F1 01 03 85 9D (node NAK)
Z-Wave Debug . . setWakeInterval: requeuing 1 unsolicited packets
Z-Wave Error device "Rauchmelder Wohnzimmer" may be asleep. configuration changes will be set during the next wake interval.
But then the module never wakes up for Indigo to push that change to it. Kind-of a chicken/egg problem in that you have to wait for the original wake interval duration to pass before a module will wake up and can accept be changed to a shorter duration.
I'm not sure how the FGSD002 works, but you might want to try forcing it awake. If that isn't possible or doesn't work, then I would recommend excluding, re-including, and re-syncing it.
Z-Wave Debug SENT setWakeInterval: 01 0D 00 13 16 06 84 04 00 01 2C 01 25 F1 89
Z-Wave Debug RCVD setWakeInterval: 01 07 00 13 F1 01 03 85 9D (node NAK)
Z-Wave Debug . . setWakeInterval: requeuing 1 unsolicited packets
Z-Wave Error device "Rauchmelder Wohnzimmer" may be asleep. configuration changes will be set during the next wake interval.
But then the module never wakes up for Indigo to push that change to it. Kind-of a chicken/egg problem in that you have to wait for the original wake interval duration to pass before a module will wake up and can accept be changed to a shorter duration.
I'm not sure how the FGSD002 works, but you might want to try forcing it awake. If that isn't possible or doesn't work, then I would recommend excluding, re-including, and re-syncing it.
- yassi offline
- Posts: 468
- Joined: Sep 06, 2015
- Location: Germany
Re: Fibaro smoke sensor FGSD002 doesn't update battery statu
Hi Matt,
ok, thanks.
I've tried twice (last time today in the morning) but I didn't succeeded, it still shows 5% battery.
Here are the logs from the exclusion/inclusion.
I'm thinking to do it this way:
1. Exclude
2, Delete teh device from Indigo
3. Reset it (there is a procedure described in the manual).
4. Includ & create the device again
What do you think?
Yassi
ok, thanks.
I've tried twice (last time today in the morning) but I didn't succeeded, it still shows 5% battery.
Here are the logs from the exclusion/inclusion.
- Code: Select all
29. May 2020 at 10:56:22
Z-Wave started controller exclusion mode
Z-Wave controller excluded module: 023 - Rauchmelder Wohnzimmer
Z-Wave Error device "Rauchmelder Wohnzimmer" no longer has a matching module 023 in the controller
Z-Wave Error device "Vandalismussensor Rauchmelder Wohnzimmer" no longer has a matching module 023 in the controller
Z-Wave Error device "Temperatursensor Wohnzimmer" no longer has a matching module 023 in the controller
Z-Wave Error to re-enable the device with a new z-wave module, press the "Define and Sync..." button in the device dialog
Z-Wave stopped controller exclusion mode
29. May 2020 at 10:57:26
Z-Wave started controller inclusion mode with encryption
Z-Wave controller included module: 024 - Notification Sensor
Z-Wave querying module for encryption support
Z-Wave starting encryption key exchange with module
Z-Wave completed encryption key exchange with module
Z-Wave stopped controller inclusion mode
29. May 2020 at 10:58:13
Z-Wave Syncing - started for "024 - Notification Sensor"
Z-Wave Syncing - retrieved module neighbors list: 4, 10
Z-Wave Syncing - assigning return route to "024 - Notification Sensor"
Z-Wave Syncing - assigned return route
Z-Wave Syncing - retrieved manufacture and model names: Fibaro System - 010F, Smoke Sensor (FGSD002) - 0C021002
Z-Wave Syncing - retrieved protocol version 4.05, app version 3.03
Z-Wave Syncing - retrieved class hierarchy: Routing Slave : Notification Sensor : Notification Sensor (04 : 07 : 01, base 00)
Z-Wave Syncing - retrieved command classes: 80v1 84v2 85v1 86v1 8Ev1 56v1 98v1 59v1 5Av1 9Cv1 5Ev1 20v1 22v1 71v1 70v1 31v8 72v1 73v1 7Av1
Z-Wave Syncing - retrieved encrypt commands: 20 84 85 8E 70 71 5A 9C
Z-Wave Syncing - retrieved capabilities: routing, battery, beaming, security, waking
Z-Wave Syncing - retrieved wake interval of 360 minutes
Z-Wave Syncing - device "024 - Notification Sensor" wake interval changed to 60 minutes
Z-Wave Syncing - retrieved group 1 associations: []
Z-Wave Syncing - retrieved group 2 associations: []
Z-Wave Syncing - retrieved group 3 associations: []
Z-Wave Syncing - retrieved group 4 associations: []
Z-Wave Syncing - retrieved group 5 associations: []
Z-Wave Syncing - added group 1 association to interface
Z-Wave Syncing - added group 2 association to interface
Z-Wave Syncing - added group 5 association to interface
Z-Wave Syncing - retrieved parameter 2 "Notification flags" is 0
Z-Wave Syncing - device "024 - Notification Sensor" parameter 2 "Notification flags" changed to 3
Z-Wave Syncing - retrieved parameter 10 "Group 2 command type" is 0
Z-Wave Syncing - retrieved parameter 11 "Group 2 command value" is 255
Z-Wave Syncing - retrieved parameter 1 "Smoke sensitivity" is 2 "Medium"
Z-Wave Syncing - retrieved parameter 3 "Visual alerts" is 0 "Disabled"
Z-Wave Syncing - retrieved parameter 4 "Audible alerts" is 0 "Disabled"
Z-Wave Syncing - retrieved parameter 20 "Temperature interval" is 1 * 10 seconds
Z-Wave Syncing - retrieved parameter 21 "Temperature sensitivity" is 10 * 0.1°C
Z-Wave Syncing - retrieved parameter 30 "Temperature threshold" is 55 °C
Z-Wave Syncing - retrieved parameter 31 "Temperature alarm" is 1 "10 Seconds"
Z-Wave Syncing - retrieved battery level of 5%
Z-Wave Syncing - changed device "Rauchmelder Wohnzimmer" address from undefined to 024
Z-Wave Syncing - changed device "Vandalismussensor Rauchmelder Wohnzimmer" address from undefined to 024
Z-Wave Syncing - changed device "Temperatursensor Wohnzimmer" address from undefined to 024
Z-Wave Syncing - complete
I'm thinking to do it this way:
1. Exclude
2, Delete teh device from Indigo
3. Reset it (there is a procedure described in the manual).
4. Includ & create the device again
What do you think?
Yassi
- Attachments
-
- Bildschirmfoto 2020-05-29 um 18.10.39.png (14.2 KiB) Viewed 2036 times
- matt (support) offline
- Site Admin
-
- Posts: 21417
- Joined: Jan 27, 2003
- Location: Texas
Re: Fibaro smoke sensor FGSD002 doesn't update battery statu
That sounds good. The Indigo device delete shouldn't be needed but won't hurt. Note though it might delete dependent Triggers, Schedules, Action Groups.
- yassi offline
- Posts: 468
- Joined: Sep 06, 2015
- Location: Germany
Re: Fibaro smoke sensor FGSD002 doesn't update battery statu
matt (support) wrote:Yeah, that‘s the problem. Have triggers, actions, etc. Maybe I won‘t delete it.That sounds good. The Indigo device delete shouldn't be needed but won't hurt. Note though it might delete dependent Triggers, Schedules, Action Groups.
Gesendet von iPhone mit Tapatalk
- yassi offline
- Posts: 468
- Joined: Sep 06, 2015
- Location: Germany
Re: Fibaro smoke sensor FGSD002 doesn't update battery statu
Hi Matt,
sorry for the delay, didn't had the time to take care about the smoke sensor.
Well, I've excluded, deleted and resetted it, now it's showing again the right battery level!
Yassi
sorry for the delay, didn't had the time to take care about the smoke sensor.
Well, I've excluded, deleted and resetted it, now it's showing again the right battery level!
Yassi
Who is online
Users browsing this forum: No registered users and 7 guests