zme_kfob2 Remote Dimmable Switch

I bought zme_kfob but i can't get i to work.
On the box in which i came it says it's a zme_kfob2, the manual says it's a zme_fbob-s.

This is what i get when i include it:

Z-Wave Syncing - started for "066 - Remote Dimmable Switch"
Z-Wave Syncing - retrieved module neighbors list: 24, 34, 38, 62
Z-Wave Syncing - assigning return route to "066 - Remote Dimmable Switch"
Z-Wave Syncing - assigned return route
Z-Wave Syncing - retrieved manufacture and model names: Duwi - 0115, Remote Dimmable Switch - 01000102
Z-Wave Syncing - retrieved protocol version 3.92, app version 1.01
Z-Wave Syncing - retrieved class hierarchy: Routing Slave : Remote Switch : Remote Dimmable Switch (04 : 12 : 02, base 26)
Z-Wave Syncing - retrieved command classes: 20v1 80v1 84v2 85v1 26v1 2Dv1 8Ev1 8Fv1 70v1 72v1 73v1 5Ev1 59v1 5Av1 5Bv1 86v1
Z-Wave Syncing - retrieved encrypt commands: - none -
Z-Wave Syncing - retrieved capabilities: routing, battery, beaming, waking
Z-Wave Syncing - retrieved wake interval of 10080 minutes
Z-Wave Syncing - device "066 - Remote Dimmable Switch" wake interval changed to 60 minutes
Z-Wave Syncing - retrieved group 1 associations: [1]
Z-Wave Syncing - retrieved group 2 associations: []
Z-Wave Syncing - retrieved group 3 associations: []
Z-Wave Syncing - retrieved group 4 associations: []
Z-Wave Syncing - retrieved group 5 associations: []
Z-Wave Syncing - group 1 association to interface already exists (skipping)
Z-Wave Syncing - retrieved battery level of 100%
Z-Wave Syncing - created device "066 - Remote Dimmable Switch"
Z-Wave Syncing - complete

I tried to exclude and then include it again but got the same result.

When i press button 1 i get this:

received "067 - Remote Dimmable Switch" scene 1 (0001)

How do i use this remote?

I bought zme_kfob but i can't get i to work.
On the box in which i came it says it's a zme_kfob2, the manual says it's a zme_fbob-s.

This is what i get when i include it:

Z-Wave Syncing - started for "066 - Remote Dimmable Switch"
Z-Wave Syncing - retrieved module neighbors list: 24, 34, 38, 62
Z-Wave Syncing - assigning return route to "066 - Remote Dimmable Switch"
Z-Wave Syncing - assigned return route
Z-Wave Syncing - retrieved manufacture and model names: Duwi - 0115, Remote Dimmable Switch - 01000102
Z-Wave Syncing - retrieved protocol version 3.92, app version 1.01
Z-Wave Syncing - retrieved class hierarchy: Routing Slave : Remote Switch : Remote Dimmable Switch (04 : 12 : 02, base 26)
Z-Wave Syncing - retrieved command classes: 20v1 80v1 84v2 85v1 26v1 2Dv1 8Ev1 8Fv1 70v1 72v1 73v1 5Ev1 59v1 5Av1 5Bv1 86v1
Z-Wave Syncing - retrieved encrypt commands: - none -
Z-Wave Syncing - retrieved capabilities: routing, battery, beaming, waking
Z-Wave Syncing - retrieved wake interval of 10080 minutes
Z-Wave Syncing - device "066 - Remote Dimmable Switch" wake interval changed to 60 minutes
Z-Wave Syncing - retrieved group 1 associations: [1]
Z-Wave Syncing - retrieved group 2 associations: []
Z-Wave Syncing - retrieved group 3 associations: []
Z-Wave Syncing - retrieved group 4 associations: []
Z-Wave Syncing - retrieved group 5 associations: []
Z-Wave Syncing - group 1 association to interface already exists (skipping)
Z-Wave Syncing - retrieved battery level of 100%
Z-Wave Syncing - created device "066 - Remote Dimmable Switch"
Z-Wave Syncing - complete

I tried to exclude and then include it again but got the same result.

When i press button 1 i get this:

received "067 - Remote Dimmable Switch" scene 1 (0001)

How do i use this remote?

I haven't got one but I think you need to setup triggers one for each button press or type of press (e.g. double, long etc, if the device handles that), probably as follows:

• Type: Z-Wave Command Received
• Event: Incoming Command Received from Device > Edit Event Settings...
  
  • Device: <YOUR ZME KFOB>
  • Received: Button 1 Pressed (etc)

You then need to specify the Action(s) that you want to be performed when a particular button is pressed.

Hopefully that should work.

I have other key fobs that it works like you describe but with this one there are no button pressed events.

I have other key fobs that it works like you describe but with this one there are no button pressed events.

OK - I guess because the device isn't defined in Indigo yet.

In that case can I suggest your try Peter's Z-Wave Scene Controller

This should do the job. From the Plugin's About info:

This plugin adds support for ZWave Scene Controllers that don't yet have a device definition in Indigo, either because it's a new device or because it's a more complicated inclusion/definition process.

Hope this helps.

[matt (support)]

Looks like this one uses the same configuration parameters as the older one so we can get it added to the next release (7.4.2). In the mean time you can do as Jon suggested and user Peter's Z-Wave Scene Controller plugin to create triggers for it.

Thanx matt!
Then i think i'll wait for the next release.
Any eta on 7.4.2?

[matt (support)]

No. It might be a while. No huge fires to put out at the moment, so we are batching up fixes/tweaks.

[matt (support)]

Indigo 7.5 is now available and includes support for the Duwi Key Fob (ZME-KFOB2).