Zooz Multisensor ZSE40 (newer version w/differences)

I had a few of these multi-sensors from roughly 2 yrs ago and just bought two additional ones. New ones look identical on the outside, but are slightly different than the old ones in that they take CR123 batteries vs. 2xAAA's of the old ones. There are apparently a few other firmware differences as well.

Indigo support for the new ones is pretty good, but here are a few minor glitches that I noticed:

1. In the parameter settings, Indigo knows of three possible settings for the LED mode. My new units were set to setting Mode 4 by default. Docs say this setting is "no indication of temperature, motion indicated with flashing light".

2. Also in the parameter settings, for the parameter "Retrigger Interval", Indigo says that this is a value in minutes and default value is 3. The docs that come with my new unit say that this is a value in seconds, the allowed values are 15-255 and the default is 15 seconds. I tested to see if maybe values <15 were treated as minutes instead of seconds, but seems that the device treats any value less than 15 the same as 15 (seconds).

is this the correct process for reporting issues such as this?

Here's the device details for one of the NEW devices:
Indigo Z-Wave Version: 7.4.0
Node ID: 66
Model: Multi Sensor (ZSE40)
Model ID: 20212101
Manufacturer: Zooz
Manufacturer ID: 027A
Protocol Version: 4.54
Application Version: 24.16
Model Definition Version: 1
Library Type: 3
Class Name: Notification Sensor
Class Hierarchy: 04 : 07 : 01
Command Class Base: 00
Command Versions: 20v1 80v1 84v2 85v1 86v1 71v1 70v1 31v7 72v1 73v1 98v1 59v1 5Av1 7Av1 5Ev1
Encryption Status: Supported but not Enabled
Multi-Endpoint Types: - none -
Multi-Endpoint Classes: - none -
Multi-Instance Counts: - none -
Features: routing, battery, beaming, security, waking
Neighbors: - none -
Associations: 1:[1]
Config Values: 1:1 2:1 3:1 4:5 5:1 6:2 7:1



in contrast, here's one of my older devices from a few years ago:
Indigo Z-Wave Version: 7.4.0
Node ID: 31
Model: Zooz Multi Sensor (ZSE40)
Model ID: 20212101
Manufacturer: Vision / Yale
Manufacturer ID: 0109
Protocol Version: 4.05
Application Version: 5.01
Model Definition Version: 1
Library Type: 3
Class Name: Notification Sensor
Class Hierarchy: 04 : 07 : 01
Command Class Base: 00
Command Versions: 20v1 80v1 84v2 85v1 86v1 71v1 70v1 31v7 72v1 73v1 98v1 59v1 5Av1 7Av1 5Ev1
Encryption Status: Supported but not Enabled
Multi-Endpoint Types: - none -
Multi-Endpoint Classes: - none -
Multi-Instance Counts: - none -
Features: routing, battery, beaming, security, waking
Neighbors: 38, 63
Associations: 1:[1]
Config Values: 1:1 2:2 3:2 4:10 5:3 6:2 7:1

[matt (support)]

Thanks for the details – we'll get those two parameters tweaked in the next version.

[matt (support)]

Indigo 7.4.1 is now available and has the modified Zooz Multi Sensor (ZSE40) configuration parameter UI.