Page 1 of 1

HeatIT new firmware

PostPosted: Fri Jul 05, 2019 4:40 am
by shapa
HeatIT released a new firmware v1.92 which is much better - now it is providing the Thermostat relay status and all sensors reading (floor / air temperature)

The issue is that the device now is semi-recognised as a Thermostat - root device shown as a relay, therefore SetHeatPoint commands are not available.

Could you please update the device description / add support? It is quite popular in the EU.

https://www.heatit.com/heating-control/ ... hermostat/

Manual heat points settings (from the device itself) received correctly

" Z-Wave received "Conservatory HeatIT Floor Thermostat" heat setpoint is 26.5 °C"



Z-Wave Syncing - assigning return route to "165 - Conservatory Floor Thermostat"
Z-Wave Syncing - assigned return route
Z-Wave Syncing - retrieved manufacture and model names: HeatIT - 019B, General Thermostat (v2) - 00030201
Z-Wave Syncing - retrieved protocol version 4.61, app version 1.92
Z-Wave Syncing - retrieved class hierarchy: Routing Slave : Thermostat : General Thermostat (v2) (04 : 08 : 06, base 40)
Z-Wave Syncing - retrieved command classes: 40v1 20v1 43v1 85v1 86v1 8Ev1 55v1 98v1 59v1 5Av1 5Ev1 9Fv1 60v4 25v1 6Cv1 70v1 72v1 73v1
Z-Wave Syncing - retrieved encrypt commands: - none -
Z-Wave Syncing - retrieved capabilities: routing, beaming, security
Z-Wave Syncing - retrieved multi-endpoint types: 1:(10 : 00), 2:(21 : 00), 3:(21 : 00), 4:(21 : 00)
Z-Wave Syncing - retrieved multi-endpoint classes: 1:[5E 85 59 8E 25 6C], 2:[5E 85 59 8E 31 6C], 3:[5E 85 59 8E 31 6C], 4:[5E 85 59 8E 31 6C]
Z-Wave Syncing - retrieved group 1 associations: [1]
Z-Wave Syncing - retrieved group 2 associations: []
Z-Wave Syncing - retrieved group 3 associations: []
Z-Wave Syncing - retrieved group 4 associations: []
Z-Wave Syncing - retrieved group 5 associations: []
Z-Wave Syncing - group 1 association to interface already exists (skipping)

Re: HeatIT new firmware

PostPosted: Fri Jul 05, 2019 10:42 am
by CliveS
Thought I might update my Heatit firmware but must admit never been impressed with it but looked for the update cable price and could not believe my eyes.

Cable for Heatit Thermostat Software Updates
by Heatit £76.00 ( $95, €85)
SKU HEA_5430497

https://www.vesternet.com/products/cable-for-heatit-thermostat-software-updates

Are they having a laugh!!!!
I will leave it as is at that price.

Re: HeatIT new firmware

PostPosted: Fri Jul 05, 2019 10:57 am
by shapa
They sent it to me for free... Older firmware is buggy (especially ~1.5)

Re: HeatIT new firmware

PostPosted: Fri Jul 05, 2019 11:08 am
by CliveS
shapa wrote:
They sent it to me for free... Older firmware is buggy (especially ~1.5)


Yes I know,
.Thermostat (TF021), firmware 1.08


Who did you contact to get the free "£76.00" cable?

I just cannot believe they can charge that price for a USB cable with 4 pins attached, or Vesternet are trying to make a profit this year :)

Re: HeatIT new firmware

PostPosted: Sat Jul 06, 2019 3:41 pm
by matt (support)
We'll add it to the list. Is the model number on the one you have TF021 or something different?

Re: HeatIT new firmware

PostPosted: Wed Jul 10, 2019 5:51 am
by shapa

Re: HeatIT new firmware

PostPosted: Wed Jul 10, 2019 5:54 am
by shapa
Who did you contact to get the free "£76.00" cable?


HeatIT directly. They have sent me a cable temporarily.

Re: HeatIT new firmware

PostPosted: Sun Aug 25, 2019 10:25 am
by Nick
Did the firmware update today and successfully, thanks to Fibaro Benelux. Great help.

Now awaiting the Indigo adjustments for full Indigo support. Thanks in advance...

Re: HeatIT new firmware

PostPosted: Sat Aug 31, 2019 7:34 am
by shapa
I actually tested a new zwave library provided by Matt, everything is fine with the new FW. So it's just to wait for the next Indigo release - it will be there :)

Re: HeatIT new firmware

PostPosted: Mon Sep 30, 2019 4:06 pm
by matt (support)
Indigo 7.4 is now available and includes support for a new version of the HeatIt Thermostat (TF021).

Re: HeatIT new firmware

PostPosted: Mon Nov 04, 2019 3:30 pm
by jaknudsen
A firmware update cable can be bought for about $2 here: https://www.aliexpress.com/item/1pcs-CP ... 52202.html

Schematic image courtesy of this post (in Norwegian): https://www.hjemmeautomasjon.no/forums/ ... ment=40443