HeatIT new firmware
Posted: Fri Jul 05, 2019 4:40 am
HeatIT released a new firmware v1.92 which is much better - now it is providing the Thermostat relay status and all sensors reading (floor / air temperature)
The issue is that the device now is semi-recognised as a Thermostat - root device shown as a relay, therefore SetHeatPoint commands are not available.
Could you please update the device description / add support? It is quite popular in the EU.
https://www.heatit.com/heating-control/ ... hermostat/
Manual heat points settings (from the device itself) received correctly
" Z-Wave received "Conservatory HeatIT Floor Thermostat" heat setpoint is 26.5 °C"
Z-Wave Syncing - assigning return route to "165 - Conservatory Floor Thermostat"
Z-Wave Syncing - assigned return route
Z-Wave Syncing - retrieved manufacture and model names: HeatIT - 019B, General Thermostat (v2) - 00030201
Z-Wave Syncing - retrieved protocol version 4.61, app version 1.92
Z-Wave Syncing - retrieved class hierarchy: Routing Slave : Thermostat : General Thermostat (v2) (04 : 08 : 06, base 40)
Z-Wave Syncing - retrieved command classes: 40v1 20v1 43v1 85v1 86v1 8Ev1 55v1 98v1 59v1 5Av1 5Ev1 9Fv1 60v4 25v1 6Cv1 70v1 72v1 73v1
Z-Wave Syncing - retrieved encrypt commands: - none -
Z-Wave Syncing - retrieved capabilities: routing, beaming, security
Z-Wave Syncing - retrieved multi-endpoint types: 1:(10 : 00), 2:(21 : 00), 3:(21 : 00), 4:(21 : 00)
Z-Wave Syncing - retrieved multi-endpoint classes: 1:[5E 85 59 8E 25 6C], 2:[5E 85 59 8E 31 6C], 3:[5E 85 59 8E 31 6C], 4:[5E 85 59 8E 31 6C]
Z-Wave Syncing - retrieved group 1 associations: [1]
Z-Wave Syncing - retrieved group 2 associations: []
Z-Wave Syncing - retrieved group 3 associations: []
Z-Wave Syncing - retrieved group 4 associations: []
Z-Wave Syncing - retrieved group 5 associations: []
Z-Wave Syncing - group 1 association to interface already exists (skipping)
The issue is that the device now is semi-recognised as a Thermostat - root device shown as a relay, therefore SetHeatPoint commands are not available.
Could you please update the device description / add support? It is quite popular in the EU.
https://www.heatit.com/heating-control/ ... hermostat/
Manual heat points settings (from the device itself) received correctly
" Z-Wave received "Conservatory HeatIT Floor Thermostat" heat setpoint is 26.5 °C"
Z-Wave Syncing - assigning return route to "165 - Conservatory Floor Thermostat"
Z-Wave Syncing - assigned return route
Z-Wave Syncing - retrieved manufacture and model names: HeatIT - 019B, General Thermostat (v2) - 00030201
Z-Wave Syncing - retrieved protocol version 4.61, app version 1.92
Z-Wave Syncing - retrieved class hierarchy: Routing Slave : Thermostat : General Thermostat (v2) (04 : 08 : 06, base 40)
Z-Wave Syncing - retrieved command classes: 40v1 20v1 43v1 85v1 86v1 8Ev1 55v1 98v1 59v1 5Av1 5Ev1 9Fv1 60v4 25v1 6Cv1 70v1 72v1 73v1
Z-Wave Syncing - retrieved encrypt commands: - none -
Z-Wave Syncing - retrieved capabilities: routing, beaming, security
Z-Wave Syncing - retrieved multi-endpoint types: 1:(10 : 00), 2:(21 : 00), 3:(21 : 00), 4:(21 : 00)
Z-Wave Syncing - retrieved multi-endpoint classes: 1:[5E 85 59 8E 25 6C], 2:[5E 85 59 8E 31 6C], 3:[5E 85 59 8E 31 6C], 4:[5E 85 59 8E 31 6C]
Z-Wave Syncing - retrieved group 1 associations: [1]
Z-Wave Syncing - retrieved group 2 associations: []
Z-Wave Syncing - retrieved group 3 associations: []
Z-Wave Syncing - retrieved group 4 associations: []
Z-Wave Syncing - retrieved group 5 associations: []
Z-Wave Syncing - group 1 association to interface already exists (skipping)