HS-WD200+ ramp rate

Posted on
Fri Feb 22, 2019 10:30 pm
peszko offline
Posts: 311
Joined: Mar 07, 2012

HS-WD200+ ramp rate

Finally got some Homeseer HS-WD200+ dimmers. Look nice and work great.

I have one question though. When I have my lights controlled by occupancy, I have them turn on quickly when occupancy is detected, and turned off slowly when occupancy is no longer detected. This give a person an opportunity to either move (to trigger motion) or manually turn on the light before it goes off completely. With insteon, I used scenes with different ramp rates. How would I do this with this dimmer? I though that I could send the configuration setting to change the remote dimming speed, but don't see a way to do so other than change parameter 11 before I turn off the switch.

Any help would be greatly appreciated.

Posted on
Fri Feb 22, 2019 11:28 pm
peszko offline
Posts: 311
Joined: Mar 07, 2012

Re: HS-WD200+ ramp rate

For now, I'm sending parameter 11 with value of 10 one second before the off command, and then I send parameter 11 with value of 1 a second after off command. Seems to work. Would there be any issue with doing it this way?

Page 1 of 1

Who is online

Users browsing this forum: No registered users and 20 guests