Everspring SP816 Outdoor PIR

Posted on
Fri Jan 18, 2019 7:12 am
racarter offline
User avatar
Posts: 468
Joined: Jun 18, 2016
Location: North Yorkshire, UK

Everspring SP816 Outdoor PIR

Please could you add this device to the next release? Currently it syncs OK but just shows as a Notification Sensor.

Thanks!

Z-Wave Indigo Device "Porch PIR" Z-Wave Properties:
Indigo Z-Wave Version: 2.0.116
Node ID: 76
Model: Notification Sensor
Model ID: 00010005
Manufacturer: Everspring
Manufacturer ID: 0060
Protocol Version: 4.61
Application Version: 1.02
Model Definition Version: 0
Library Type: 3
Class Name: Notification Sensor
Class Hierarchy: 04 : 07 : 01
Command Class Base: 00
Command Versions: 80v1 84v2 85v1 86v1 55v1 98v1 59v1 5Av1 5Ev1 9Fv1 20v1 6Cv1 71v1 72v1 73v1 7Av1
Encryption Status: Supported but not Enabled
Multi-Endpoint Types: - none -
Multi-Endpoint Classes: - none -
Multi-Instance Counts: - none -
Features: routing, battery, beaming, security, waking
Neighbors: 2, 6, 7, 8, 10, 11, 12, 15, 16, 17, 18, 20, 24, 25, 28, 33, 34, 35, 41, 42, 52, 53
Associations: 1:[1] 2:[]
Config Values: - none -

Posted on
Fri Jan 18, 2019 4:17 pm
matt (support) offline
Site Admin
User avatar
Posts: 21411
Joined: Jan 27, 2003
Location: Texas

Re: Everspring SP816 Outdoor PIR

Does the sensor state update to ON/OFF inside Indigo when motion is detected?

If not, can you enable Indigo's Z-Wave debug logging checkbox (via the Interfaces->Z-Wave->Configure... menu item) and trip the motion detector a couple of times? Wait a few minutes after tripping it so the log can capture the follow-up "off" command. Copy/paste the Event Log results into a reply for me and I'll get it on our request list.

Image

Posted on
Fri Jan 18, 2019 4:34 pm
racarter offline
User avatar
Posts: 468
Joined: Jun 18, 2016
Location: North Yorkshire, UK

Re: Everspring SP816 Outdoor PIR

Hi Matt

No, the sensor state doesn't update when tripped. Here's the log data you asked for:

Z-Wave Debug RCVD requestAlarmSensorStatus: 01 0F 00 04 00 43 09 71 05 00 00 00 FF 07 08 00 3A
Z-Wave Debug . . requestAlarmSensorStatus: node 067, endpoint None, cmdClass 71, type 0, value 0, classSubKey 710000
Z-Wave Debug . . requestAlarmSensorStatus: typeExt 7, valueExt 8, classSubKeyExt 7100000708
Z-Wave Debug RCVD requestAlarmSensorStatus: 01 0F 00 04 00 4C 09 71 05 00 00 00 FF 07 08 00 35
Z-Wave Debug . . requestAlarmSensorStatus: node 076, endpoint None, cmdClass 71, type 0, value 0, classSubKey 710000
Z-Wave Debug . . requestAlarmSensorStatus: typeExt 7, valueExt 8, classSubKeyExt 7100000708
Z-Wave Debug RCVD requestAlarmSensorStatus: 01 10 00 04 00 4C 0A 71 05 00 00 00 FF 07 00 01 08 28
Z-Wave Debug . . requestAlarmSensorStatus: node 076, endpoint None, cmdClass 71, type 0, value 0, classSubKey 710000
Z-Wave Debug . . requestAlarmSensorStatus: typeExt 7, valueExt 0, classSubKeyExt 7100000700
Z-Wave Debug RCVD requestAlarmSensorStatus: 01 0F 00 04 00 4C 09 71 05 00 00 00 FF 07 08 00 35
Z-Wave Debug . . requestAlarmSensorStatus: node 076, endpoint None, cmdClass 71, type 0, value 0, classSubKey 710000
Z-Wave Debug . . requestAlarmSensorStatus: typeExt 7, valueExt 8, classSubKeyExt 7100000708
Z-Wave Debug RCVD requestAlarmSensorStatus: 01 10 00 04 00 4C 0A 71 05 00 00 00 FF 07 00 01 08 28
Z-Wave Debug . . requestAlarmSensorStatus: node 076, endpoint None, cmdClass 71, type 0, value 0, classSubKey 710000
Z-Wave Debug . . requestAlarmSensorStatus: typeExt 7, valueExt 0, classSubKeyExt 7100000700

Posted on
Fri Jan 18, 2019 4:42 pm
matt (support) offline
Site Admin
User avatar
Posts: 21411
Joined: Jan 27, 2003
Location: Texas

Re: Everspring SP816 Outdoor PIR

Thanks, that is what we need. In the mean time you can follow the steps here to capture the ON and OFF commands.

Image

Posted on
Sun May 12, 2019 4:14 pm
matt (support) offline
Site Admin
User avatar
Posts: 21411
Joined: Jan 27, 2003
Location: Texas

Re: Everspring SP816 Outdoor PIR

Indigo 7.3 (and 7.3.1) are now available and should support the Everspring Motion Sensor (SP816).

Image

Posted on
Mon May 13, 2019 12:23 am
racarter offline
User avatar
Posts: 468
Joined: Jun 18, 2016
Location: North Yorkshire, UK

Re: Everspring SP816 Outdoor PIR

Cool! Thanks Matt. :)

Page 1 of 1

Who is online

Users browsing this forum: No registered users and 17 guests

cron