Leviton VRCZ4-MRZ controller

Last zwave device I had problems with I had to take the aeotec stick to the device and maybe on the 10th attempt I got the stick light flashing and showing the inclusion. No idea why it took that many goes.


Sent from my iPhone using Tapatalk

OK. Still have a few of these that I cannot include, manually or with Indigo. Here is latest attempt with debug log. What are my options here?


2018-10-24 08:45:54.408 Z-Wave started controller inclusion mode
2018-10-24 08:45:54.410 Z-Wave Debug RCVD inclusionMode ready: 01 07 00 4A 01 01 00 00 B2
2018-10-24 08:45:59.765 Z-Wave Debug RCVD inclusionMode node found: 01 14 00 4A 01 02 8E 0D 02 02 02 85 2D 82 72 86 77 91 EF 2B 2C F3
2018-10-24 08:45:59.765 Z-Wave Debug RCVD inclusionMode adding controller: 01 14 00 4A 01 04 8E 0D 02 02 02 85 2D 82 72 86 77 91 EF 2B 2C F5
2018-10-24 08:46:01.048 Z-Wave Debug RCVD nodeInfoFrame: 01 13 00 49 84 8E 0D 02 02 02 85 2D 82 72 86 77 91 EF 2B 2C 70
2018-10-24 08:46:12.244 Z-Wave Debug RCVD inclusionMode failed: 01 07 00 4A 01 07 8E 00 3A
2018-10-24 08:46:12.245 Z-Wave Debug SENT exitInclusionMode: 01 04 00 4A 05 B4
2018-10-24 08:46:12.246 Z-Wave Debug RCVD exitInclusionMode: 06 (ACK)
2018-10-24 08:46:12.247 Z-Wave Error stopped controller inclusion mode (failed)
2018-10-24 08:46:12.312 Z-Wave Debug RCVD inclusionMode finished: 01 07 00 4A 01 06 00 00 B5
2018-10-24 08:46:12.312 Z-Wave stopped controller inclusion mode

Can you temporarily move them (or your Z-Wave controller/Mac) closer to each other for the inclusion process?

Hi Matt

So I tried again taking the z-stick out and attempting to manually include those controllers (4 of them) that were failing. It took around 10x each but I finally got them included![/size]