Jay,
I actually have 2 sticks, as I ordered a new one when the problem first happened and I suspected failing hardware (some others reported similar symptoms). The new one also did the same, and I tried upgrading my original which is in place now, but they both behave the same way.
- Code: Select all
Starting interface "Z-Wave 2.0.119" (pid 8280)
Started interface "Z-Wave 2.0.119"
Z-Wave connected to Z-Wave 4.54 static controller interface on /dev/cu.usbmodem1411 (firmware 1.01)
The Mini is a Late 2012 i5 with 16Gb RAM and an SSD.
The workaround wasn't mine, but taken from
https://forums.indigodomo.com/viewtopic.php?f=58&t=14060&start=30 but it does the trick.
No great drama as it seems to only fail during an optimise, bit the first time it happened was during my night time trigger that shuts everything down so it could be related to higher volume Z wave activity.
The stick definitely gets in a bad state, as a reboot doesn't fix it, you have to physically unplug it, and the led freezes on the colour it was cycling at the time.
Thanks,
Neil