Trouble with Fibaro RGBW controller
Posted: Tue Sep 11, 2018 1:24 am
A wile back I instralled my first led strip, and connected it to the Fibaro RGBW controller. Everything was working fine.
So, after some months Indigo suddenly stopped to update the status on the device. I tried a exclude / include, and the device was working as intended again.
But again after some time it stopped to report status. I was able to do a firmware update of the device, but again after some time the same issues occurred. So before I take the device back to the store I want to make sure that the issue is not with Indigo. The issue is that the sub devices is not updated when I change the composite device. I still receive power measurements from the device.
Below is a sync from the device. Any idea?
So, after some months Indigo suddenly stopped to update the status on the device. I tried a exclude / include, and the device was working as intended again.
But again after some time it stopped to report status. I was able to do a firmware update of the device, but again after some time the same issues occurred. So before I take the device back to the store I want to make sure that the issue is not with Indigo. The issue is that the sub devices is not updated when I change the composite device. I still receive power measurements from the device.
Below is a sync from the device. Any idea?
- Code: Select all
Z-Wave Syncing - started for "Light - Bed Underglow - Composite"
Z-Wave Syncing - retrieved module neighbors list: 7, 15, 16, 18, 19, 20, 21, 24, 25, 26, 46, 48, 68, 80, 82, 88, 105, 116, 117, 125, 127, 136, 142, 144, 145, 148, 150, 154, 157, 158, 161, 162, 163, 164, 165
Z-Wave Syncing - assigning return route to "147 - Light - Bed Underglow - Composite"
Z-Wave Syncing - assigned return route
Z-Wave Syncing - retrieved manufacture and model names: Fibaro System - 010F, RGBW Controller (FGRGBWM) - 09001000
Z-Wave Syncing - retrieved protocol version 3.67, app version 26.25
Z-Wave Syncing - retrieved class hierarchy: Routing Slave : Mulitlevel Switch : Dimmable Power Switch (04 : 11 : 01, base 26)
Z-Wave Syncing - retrieved command classes: 20v1 60v3 26v1 86v1 27v1 72v1 70v1 31v2 32v2 33v1 85v1
Z-Wave Syncing - retrieved encrypt commands: - none -
Z-Wave Syncing - retrieved capabilities: routing, beaming
Z-Wave Syncing - retrieved multi-endpoint types: 1:(11 : 01), 2:(11 : 01), 3:(11 : 01), 4:(11 : 01), 5:(11 : 01)
Z-Wave Syncing - retrieved multi-endpoint classes: 1:[26], 2:[26], 3:[26], 4:[26], 5:[26]
Z-Wave Syncing - retrieved group 1 associations: []
Z-Wave Syncing - retrieved group 2 associations: []
Z-Wave Syncing - retrieved group 3 associations: []
Z-Wave Syncing - retrieved group 4 associations: []
Z-Wave Syncing - retrieved group 5 associations: []
Z-Wave Syncing - added group 1 association to interface
Z-Wave Syncing - added group 2 association to interface
Z-Wave Syncing - added group 3 association to interface
Z-Wave Syncing - added group 4 association to interface
Z-Wave Syncing - added group 5 association to interface
Z-Wave Syncing - retrieved parameter 16 "Power up to last known state" is true
Z-Wave Syncing - retrieved parameter 8 "Outputs change mode" is 0
Z-Wave Syncing - retrieved parameter 9 "On/Off dim delta" is 1
Z-Wave Syncing - retrieved parameter 10 "On/Off dim timer" is 10 milliseconds
Z-Wave Syncing - retrieved parameter 13 "Minimum value" is 2
Z-Wave Syncing - retrieved parameter 12 "Maximum value" is 255
Z-Wave Syncing - complete
Z-Wave sent "Light - Bed Underglow - Composite" status request
Z-Wave sent "Light - Bed Underglow - Composite" energy status request
Z-Wave sent "Light - Bed Underglow - Red" status request
Z-Wave received "Light - Bed Underglow - Red" status update is off
Z-Wave sent "Light - Bed Underglow - Green" status request
Z-Wave received "Light - Bed Underglow - Green" status update is off
Z-Wave sent "Light - Bed Underglow - Blue" status request
Z-Wave sent "Light - Bed Underglow - White" status request